I was an extrusion operator at Hardie irrigation co. In El Cajon Ca. During the eighties. We had to do everything manually. We set the laser hole and glue patch , as well as cut the line and slap it to a piece of tape on the next reel. Then we would cut a sample from the finished reel and take it for testing. If the sample did not pass, we were scrapping. At this point we would check all of the settings, clean the line if neccessary, then cut and start the next reel. If the next test sample passed we were good to go, if not we were still scrapping. We also had to cut all of the hose off of the scrapped product reels so that it could be ground up and used again. There were no lunch breaks , you had to eat between reels, about 5 minutes. Craziest job I ever had. Anybody else out there ever do this job?
je veux voir la ligne de production de tuyaux plats pour goute à goute la matière première et la fiche technique de machines et le prix final de chaque machines
I was an extrusion operator at Hardie irrigation co. In El Cajon Ca. During the eighties. We had to do everything manually. We set the laser hole and glue patch , as well as cut the line and slap it to a piece of tape on the next reel. Then we would cut a sample from the finished reel and take it for testing. If the sample did not pass, we were scrapping. At this point we would check all of the settings, clean the line if neccessary, then cut and start the next reel. If the next test sample passed we were good to go, if not we were still scrapping. We also had to cut all of the hose off of the scrapped product reels so that it could be ground up and used again. There were no lunch breaks , you had to eat between reels, about 5 minutes. Craziest job I ever had. Anybody else out there ever do this job?
Hats off my man! our generation will never know the hardships you people have faced
@@qutubrehman5104 Thanks, you are wise beyond your age.
Please send quotation from all setup
How to job set plz one vodeo❤
What is price of complete setup of mashines
Sir drip jop Oprater jop
je veux voir la ligne de production de tuyaux plats pour goute à goute la matière première et la fiche technique de machines et le prix final de chaque machines
hotelbiban@gmail.com
Nice line and speed. Which material working at this speed?
PE (borouge le 2270)
प्रोजेक्ट कि किमत और आपका नबंर
ईनवेस्टर पाहिजेत नाशिक
Mukesh mahajan
تواصل مع الرقم