B1U6: How to Reduce Handlebar Vibrations in Royal Enfield
HTML-код
- Опубликовано: 28 мар 2017
- Lenker-Vibrationen in Royal Enfield reduzieren
réduire les vibrations du guidon à Royal Enfield
In this video, I have shared my experience on how to reduce handlebar vibrations on a Royal Enfield motorcycle. I hope these tweeks help you get over the problem. :)
Here's the link to the hindi version of the same video: • B1U7: Hindi | Reduce H...
LInk of my Motul 300V review: • B1U4: Best Engine Oil ...
Link of my handlebar clock review video: • B1U1: Mounting Handle ...
Please subscribe to my channel!!
#bullet, #royalenfield, #biking #mods
Let's do Bulletism, unlimited!
==================
Some essential links:
My Helmet: amzn.to/2qnMqff
Motul 300V Fully synthetic Engine Oil: amzn.to/2p0Tutq
Riding Gloves Size M: amzn.to/2o6saNO
Riding Gloves Size L: amzn.to/2oa4nx8
Handlebar Clock: amzn.to/2monm5V
Action Camera: amzn.to/2p0kDBq
Action Camera Accessories: Helmet mount: amzn.to/2p0end9
Action Camera Accessories: Waterproof case: amzn.to/2p0l1jm
Primary Camera: Xiaomi Redmi Note 4
Secondary Camera: Xiaomi Mi5
====================
~-~~-~~~-~~-~
Please watch: "Project Maverick: Custom Modified Royal Enfield Classic 350 cc l Scrambler"
• Project Maverick: Best...
~-~~-~~~-~~-~ 
Авто/Мото
I have genuinely never seen a RE Owner so sensible...thanks a lot for the advice
I found 2 cut washers in my house that fit exactly at the bottom of the handle clamp. To my surprise vibrations reduced a lot. I will try fixing on the top as well. Hope it will reduce further. Thanks for sharing.
+Jagadeesh Polepalli that's good to know... Keep experimenting! And keep sharing :)
If we use rubber wiser rubber will absorb vibration
Handle bar grip cover is also one option. Good video... Cheers keep them coming!!! Subscribed
+BULLET DIARIES
That's a good point too.. thanks brother for the advices...
BULLET DIARIES
superb brother
right
BULLET DIARIES What's that?
All good tips - especially the engine bracket bolts! Many thanks.
Thank you for your information video
Good information. Simple and effective. I agree.
+Praveen Singh thanks!
Thanks mate for sharing ur opinion...appreciate it.
simply entertaining . i'll be back
A lot of great tipps, Thank You!
Glad it was helpful!
If u really want to reduce vibration at handle bar my suggestion would be add a tyre tube piece from puncture shop u will get it for free in between the C clamp and handle bar rod and tighten is with spring washer for all four bolts
Bro after dng this is ur bike handle. Comfortable at 100kmph
good review Mr. Saral gupta.
Thing i don't understand is,
U hav 2 do all this Stuff after paying 1,50,000 😬😬😬😬😬😬😬
+Balaji Chandrasekaran that's the irony with this damn machine... ;)
well, I had lot of hopes with Himalayan, but it also had quality issues :(
I was reading a joke: instead of buying the RE bike, you should have invested in their shares, we would have been super rich by now ;)
Balaji Chandrasekaran bullet craze haha
+Raghav Gajendra absolutely!!
if u love bullet, u have toooooo
gosh it makes me laugh. thanks RE for making our guys mechanic. Its time for some steel balls.............
Dinesh Rao hahaha true
Sameer Bawa common dude u can't expect everyone to say ball bearings right
Astonjon D'Almeida may be I'm not complaining.
I would advise, having done it on my Classic EFI-500 that after running the engine in properly to 1000km that you start using more revs through the gears so that the engine loosens up further By 2000km the engine should have loosened up and be able to rev over 5000rpm without excessive vibration. It will also produce more power and run more smoothly at the bottom end.
Once it has been run in, use more revs to further bed the engine in.
+Jeff Slade that's a great advise, Jeff!
nice video. nice info. keep trying new things n do share 👍
+Atul's VLog thanks for watching!
very useful bro great video keep doing
+Arun suryan dilwara thanks bro!
Good stuff..welding a rod is effective but using the extra bar end weights will only increase the vibration.. for example attach a 50-100gm bolt to a rod n see at the ends of it..it vibrates unnecessarily, try to use only 1 bar end & feel d change.
+Max Avi let me try doing it bro... Thanks for watching!
Simplydmax ...weld rod like RD350 and no counter weight worked for me 😊....I prefer damping the source of vibration by adding about 30+30+30 mls to the engine before next service
+Kirankumar Penjala pls keep us posted bro...
Not a fan of the pencil thin handgrips on my Enfield, I found a pair of thicker, much heavier grips. They were advertised as "The most comfortable grips for your bike" and they made a HUGE difference.. I believe they were made by Kuryakyn.
Thanks for sharing the info!
post très intéressant :-) et belle moto
Nice
My classic 350 is very smooth and I have changed it's silencer still it doesn't need anything extra stuff.And 80km/h is sufficient speed for me.
Bhai mai bhi silencor Indori lgwaya hu..... vibration kafi jyda ho ra...aur mileage bhi kam de ra
How you fitted extra handle or weight to the handle bar
bro I have been using castrol active since I brought my classic 350.
Tks broo
nice man, appreciate it, cut and short :)
Honestly i dnt know is it a good thing or not..my classic vibrates from 60-65 but post 65 no vibratin till 100...now i changed to spring washer and it helped me to some extend
I am riding a lightning 535. Can i use 300v on cast iron engines?
Dude tell me one thing,after doing these small changes will you able to ride it above 90kmph in stable ( specially the left hand bar)???
How to fill steel balls...?After mixing with araldite?
1. did u welded rod or hollow pipe across the handle bar?
2. how much quantity ball bearing required to fill the handilbar inside?
would u plz upload video while a running the RE the we can analyse how much effective your ideas..
thakz to share tipz...
+ABHI NAND.A.M
1. Rod is solid iron, not hollow
2. Around 5 packets
3. I'm waiting for my action cam to arrive from US, i promise I'll make a video while running to show the reduction in vibrations..
Thanks for watching!!
Bulletism Unlimited Sorry, any rod hollow or pipe will work since it balance the vibration at left and right grip ends technically with an effect of reduced vibration.
Don't worry. All motorcycles create vibration at handlebar after a certain speed. My Pulsar is also vibrate above 70. My RE classic 350 vibrate slowly from 55-60 then goes smooth from 60-70 and again starts vibrating from 80 onwards.It is a cruiser vehicle not meant for racing.
People have ambition to buy RE but couldn't due to fear factor
1.Don't want to spend high price
2.Want to buy high fuel economy bike
3.Fear to drive a heavy bike like RE
will always complain against RE out of frustration.
Could you provide us with a tutorial of engine braking and rev matching?
+Mayur Madhuraj sure, I'm planning to do it as soon I get my action camera...
How did you filled the handlebar with steel balls . Did you drill the handle. Please let me know what you did to fill the steel balls in handlebar. A reply in this regard will be helpful. I am also planning to do the same.
Hi..can u tell me where did u get that handlebar clock from...??
does that clock works at night??
Hi bro, hope using synthetic oil you can increase the oil change interval, could you please tell me how many kms. I must change oil in my classic 350 .
Thanks,
shaji.
+Shaji K.Damodaran not much difference in interval change I noticed..
Change it every 3500 or max 4000 kms... Keep checking every 1000kms, sometimes the level can drop based on your riding style too..
subscribed - good one friend...
+Raghav Gajendra thanks for watching!
@bulltetism unlimited After how many kilometers shall we change this engine oil..My bullet runs for around 500 kms a month.
Or shall we change this engine oil per servicing??
+Pranjal Singh yes, after every service should be the right interval to change the oil
Bro what is the price of side mirror?
Dear friend I would like to interchange key slot with amp meter slot as key on rt side of dome is comfortable. Is it possible?
+Ashok Hallur I doubt if it's possible my friend...Requires lot of rewiring and adjustments
How did you fill the handle bar with that can post any video or can you send any tips , and where can I get that metal balls ,
+karuppa swamy those metal balls u can get them at any hardware store.. u need to cut a small hole at the bottom of the handle, maybe 50p size. The hole has to be near the c clamp, where u tighten the handle.
Hey, till Wat speed can u reach without feeling much vibration? instead of welding a rod in the middle of the handle bar can change the handle bar to a cross shaped or a straight handle bar which gives more handling too? correct me if I am wrong
+Chavan Hks till 80 no vibs with my current setup...
U can change the handlebar, that will.also reduce the vibs a lot
pls tell about, how to reduce seat vibration
+srini vasan check the seat bolts, if loose, get it tightened.. else, you can't do anything much to reduce under seat vibrations
Please tell me about the vibration happens in hero meastro edge...
can be due to lot of reasons... I would recommend you have your bike checked by a near-by knowledgeable mechanic
Ji one help whats that watch in that handle bar what's accessory is that can you pls tell me
+Deva Raj it's the handlebar watch itself.. check my first video on fitment and other details
Hey brother nice video, I also wanna make this mod on my bike but I couldn't find steel balls any where in my place. If you could please help me out with the steel balls I will be more than happy 🙂
There is so much hate for royal enfield but it sells like crazy! #hatersgonahate. I love my RE
+Pranay S that's right! It still sells.. and with the 650 engines.. there is more fun coming soon ;)
from where you brought extension weights to your handle bar..
would you please share the product link!
its looks awesome.
+ABHI NAND.A.M you will get it at any bullet spares part store..
Bulletism Unlimited :
ok i will try to find it in nearby spare shop
would u please upload a video abut the extra weight fiten in the handlebar...
can i fix the genuine handle side weight on the existing one??
+ABHI NAND.A.M yes, you can fix extra weight on existing handlebar only
can I use the oil which u have suggested on a brand new bike ?
+Kurian Cherian there is no harm as such... But I won't recommend it on a new engine.. finsih off the initial running in period, probably, after first service, when you have to change the oil, go for 300v
Sir how did you fill the mseal and the ball bearings inside the handle
I just kept pushing the paste into the handle bar from both sides, till it was full
can i instal a fuel metre on RE Classic 350
+Chowmalapan Khamhoo yes you can... But u need to get it done from an experienced mechanic.. the company guys won't do it..
kya baat...
mahn...thanks a lot .i have tried and it helps a lot.keep making these like videos, they help a lot
i think about 70% of vibration are reduced right now
once again thanks for this video
keep it going,may god bless you
+deepak vk thanks for the appreciation brother... I'm glad it helped :)
Best engine oil for Honda cb unicorn 160?
+Kingson Durai u can go for any oil that's fully synthetic... Even a 300v is good
I made changes as said in your video
1. Tightened the mounting bolts
2. Extra Bar end weights
3. Filled handle bar with sand and bearings
after doing these the vibrations were minimised to maximum extent but
when I welded a SS rod to the handle vibrations have come back ...later realised that I welded a hollow one..do you think thisis the reason for the vibrations to come back ??
Should I be using only a solid iron rod or even a solid SS rod works ??
Now I want to use MSeal instead of sand ..how to push it into Handle Bar ??
Im planning to have rubber washers for the mounting bolts..where can I get them and what would be the size I need to ask them
Thanks,
Naveen
+Naveen M I'm amazed you tried so many things already!! Great stuff :/
Go for a solid rod, not hollow. Solid SS will also work...
Pushing mseal inside is time consuming, here's the trick.. get a small hole done under the c clamp.. start stuffing mseal from there.. it will take time, but is effective.. leave it to dry for 4-5 hrs or overnite...
Any hardware shop will help u rubber washers... Go for the same size as that of the cut washers...
Let me know if you face any issues
Yesterday I tried welding a solid MS rod but vibrations are back again
not sure where Im going wrong
+Naveen M you can't avoid the vibrations after certain point... What's the problem you are facing now?
+Naveen M oh, that's strange... The vibs must have reduced after welding the rod... The only thing I can think of is... Get the handle refixed again... Get it tightened one more time
How to purchase? & where? Pls give address.
This thump which is called vibration is the only fun of RE
my handel vibration total =0= just made myself something new aur kam bangaya
What did you do... Pls share with us also
main iske upar ek video banake share karunga
Noting could change this massage machine
All bullets vibrates like an eicher tractor leaving your arms rattling the whole day.
Whats the price ande meaning of 15w20 code
+Abhishek Sharma price is 1050 per litre.. I'm not sure about the code bro
Hi bulleteirs
This is Sathish from Chennai. I going to buy a classic 350 for the first time. Suggest me is new gun metal grey matte finish is good or bad. Wether the colour is easy maintenance or tough
+sathish kumar it's the best color for a classic right now... Requires no additional maintenance
it costs aroumd 11k extra from normal classic 350, for rear disc brake, but I couldn't find any difference in braking from earlier drum brakes
300v mai koun sa hai 20w50 yan 15w50
+Abhishek Sharma 15w 50
There is 5 things to do to Reduce vibes!
Grips is the last on the list...
1. Oil, fresh, change afrer 5000km, after that oil loses its properties...so. Yeah. Fresh oil Really helps!
2. Rubber foot peg mod
3. Rubber on fuel tank, so vibes dont transfer.
4. 2t oil added to fuel in 500:1 ratio, works as upper cylinder lube, use TCW3 oil.
5. Grips...and barkBusters against the wind!
There are 3 more things to do but who cares
Pls share more
@WJ Ok, this summer season i will make Ultimate video with all tips and tricks.
can the fully synthetic engine oil be used on Himalayan sir?
+Charan Reddy yes sir! Without any doubt!
Bulletism Unlimited thanks for ur reply sir! so 300 v can be used ryt?
+Charan Reddy yes, done worry, use it without fear... It's the best oil for any RE, even Himalayan!
Bulletism Unlimited thanks a lot sir!!
Charan Reddy don't waste money on synthetic oil, first of all there is no fully synthetic oil it's mixed with regular oil, in balanced proportion. Secondly synthetic oil should be only used for recommended engines prescribed by the company RE regular motorbikes doesn't come under that category , thirdly synthetic oil should be used where there is extreme climate .
Does any of your tricks, reduce the Mileage of your Bullet 350 ?
+Prashant Singhal no, not at all!!
what if we use heavy cafe bike handlebar to reduce the vibration
and what rpm meter u using??
+allwin samuel a heavy handlebar is a good option too... I did not use it bcos I like keeping it stock..
It's not a rpm meter, it's a handlebar clock, see my first video labelled B1U1
+allwin samuel heavy handlebar is a good option too.. it also reduces the vibrations..
It's a clock, not rpm meter... See my first video about the review on it ;)
I have owned STD 350 u know very abt front brake problem give me some ideas to overcome that even service centre doesn't have a perfect solution
+Arun suryan dilwara I think the front brakes work fine most of the times... What's the exact issue? Do u think they are very effective? Or some other user
+Arun suryan dilwara *issue
Bulletism Unlimited it gets jammed after 500kms of service not a single tym..it reports on everytime
+Arun suryan dilwara get the brake pads checked.. show it to a local mechanic.. bullet has good front brakes...
Please tell this to Royal Enfield. Their engineering department is sleeping for long time.
Did you change your handle bar?
+avin saj I'm using the same handlebar, just made it more heavy
Sir...Where can i get those washers from?
+Chandu Rajasekhar usually any mechanic would have it in his junk stock box... Else, any automobile spares shop will sell them
Bulletism Unlimited Okay Sir!
Fill the handlebar with Shotgun lead bird shot.. heavier than steel... softer, less clatter.
I dud in would like to know where can I get a simple modified royal Enfield. chesvalladares74@gmail.com looking forward to hearing from you soon
guys, can I get some suggestion on bike seat cushions because can't travel for a long distance on the stalk one so could u help me out.
+Nikhil.a Nikkam how old is the bike, did you get the suspension checked? If it is fine, just go for a new seat foam...
Bulletism Unlimited 2 years old bike I thought of customizing the pillion seat
+Nikhil.a Nikkam u can go for a single seat with a back rest.. juts like the one in Thunderbird
Bulletism Unlimited no I want a solution for my back seat which is small and comfortable to sit
+Nikhil.a Nikkam not much that u can do... U have to take regular breaks while long distance riding...
plz should mention the size of the steel balls ?
+Aravind vellatt not sure of the size brother.. don't buy too big ones though
does it work in real for sure??
+Vivek Kashyap it has for me, and many others who have tried the tips
Bro uplode running video
+swagath G yes, very soon bro... For my action camera setup ready... Will make a video very soon
HELPFUL
classic 350 ka seat kaise niche kare
+sumit roy seat k niche springs hain, remove it and with basic alterations u can fix seat again. This will reduce height. Another option is use custom bucket seats.. one more option is cut the foam a bit..
How come your engine oil reduce bike vibration? I am shocked after hearing this
Ya they do reduce to an extend
Sir is standard has less vibration as compared to Classic
good information
+Vijay Kiran thanks for watching!
hi I have issue with the handle , am feeling heavy while turning on lift side. can u tell what is the issue
+Jibby Benjamen get the cone set checked. Also , could be that the fork is bent .. did the bike fall recently ?
Bulletism Unlimited thanks for quick response...recently I have done with servicing but still am face the same issue
no bike didn't fall
+Jibby Benjamen ok, then we are safe... Get the cone set checked and if required get it changed...
+Jibby Benjamen get it checked from a local mechanic... It's not a big work
I have a classic 350 it vibrates in 50 km anybody advice me how to reduce it
First change swingarm bush
Plastic bush replace to metal bush
Reduce some vibration
so simple remove the handle bar and start riding 100% no handlebar vibration😂😂😂😂
+prince vegeta lol, no one thought of this idea yet... ;)
but I have one doubt bro!?
Grip puppies? Try them.
Bro end bar counter weights do not help have tried them personally.
+Binu Balachandran they helped me initially... Now I'm also planning to remove them and check once
I also own a royal Enfield
I have never felt vibration
sometimes I ride it continuously for 10-12 hrs
but never felt any vibrations.
sab chonchley hai off vibrations... itna he vibrations feel hota hai toh dusra motorcycle kharid lo bekar mey lakh rupia kharcha karney ki Kya jaroorat hai
Side mirror price bro???
250rs
S cruiser bikes have vibration but not likes the royal Enfield classic .
The vibrations is like it will break the bones of the person who is riding the bike.
It's not a worthy machine for rupees 1.7 lakhs on road price.
First change swingarm bush
Plastic bush replace to metal bush
no need for 300v in a old type engine like this in r.e. full synthetic did not even exist when this engine is created
Please improve audio quality... 😊
+Encrypted 03 working on it
Dear riders.. no need of these much effort.. RE vibration automatically reduce by 40 % after 15k km ... also u can reduce vibration by using fully synthetic oil (motul will be good).. by since your machine vibration reduce to 80% .. any other extra efforts are goes waztttt.. good luck happy ridinG
Handle bar name
+Ajith G it's the stock handle bar only
arre demo q ni dia -_- bdw nice video though
+Raj Taneja thanks bhai... I shall do it soon...
You are just unnecessarily making the bike heavier, vibrations are a part of the engine, u need to use vibration dampers like rubber and other material and stop the vibration from spreading. Second thing if u ride the bike at certain speed u will notice that there r no vibrations which makes the first three mins of the video about using the right oil and the cruising funda real
+Sandeep Thakur vibrations are a part, I agree. I tried using rubber to dampen the vibrations, but it was of little help... And getting the right rubber is a challenge, no one wants to give u piece of rubber for retail purpose..
You know which rubber I mean here ;)
Sandeep Thakur where to apply those rubbers, please guide
When the bike manufacturers make the product they try to make the best, however we try to screw it up. Now coming back to rubbers u will need to fabricate the same as they r not a part of the oem market, same can be done by purchasing appropriate type and the trying to get it fixed where ur engine is bolted also if u get more of the head rubbers which are already installed from the service centre it will even help drastically. Hope that helps
+Sandeep Thakur that's indeed a great suggestion.
Sandeep Thakur well said.... i love the vibrations actually.. its a part of my 500cc beast... i dont wanna kill the originality of my bike....
choose RE CL500 forgot vibration
+ZEESHAN AKHTAR yes, the 500 has less vibs compared to 350
500CC Top speed whitout Vibration ?
+ZEESHAN AKHTAR you are asking me? I don't know.. haven't tested it .. I have 350
mera sawal hai 500CC kitni speed pr vibrate hoti hai
+ZEESHAN AKHTAR I think 80 -90 k Baad vibs shuru hote hain...
rpm meter kaise fit kiya aapane
+Pachu Sooral bhai, woh handlebar clock hai... Mera pehla video dekho... I have explained how to it
bhai aapaka pehala video ka link bejana
+Pachu Sooral ye lo sir
ruclips.net/video/Ay28y1eXHyQ/видео.html
rpm meter fitting video bAnaya hai Kya
+Pachu Sooral no bhai
My close relatives told me don't buy Royal Enfield, this bike has issues. I am happy and saving money from other brands
The Royal Enfield company is not at all worried about vibrations, they don't care about customer, then why are you worried and why should we buy Royal Enfield, there many brands now who care about their customers