Thank you for showing us. I thought I had to buy another upper receiver just because I thought my hop up was broken. Turns out, I just need to screw in more
Using a standard nub with a maple leaf bucking is less than ideal. A concave nub will allow you to get the most out of the design of maple leaf bucking's concave contact patch. Even a soft m-nub would work. I know it looks like a kinda tight fit in there but even if it takes modifying the arm by filing down the fangs it would likely be worth the performance gain, and it can be done without impacting the function of the hop up adjustment screw interfacing with the arm. If you didn't want to modify the hop arm, a "fishbone" style h nub would work too. Out of curiosity I've tried using standard stock nubs with Maple leaf buckings and you definitely wind up leaving performance on the table.
For some reason mine has a really hard time releasing magazines. I don't really mind it the mag getting snagged when you try to load it, but I hate it when I empty a mag and the gun just doesn't wanna give up it's magazine. Should I file down the mag release thing, or is that a bad idea?
Is that normal that even with fully adjusted hop up 0.2 bbs drops very fast? like max 30 meters ... maybe not even this much. 0.3 will drop like affter 10 meters. Not sure whats the problem here. Maybe new hop up rubber?
@@andrewchou9099 already fixed it. I overadjusted hop up so the rubber slowed the BB drastically so it has not much momentum left. Didnt even knew you can overadjust it to this degree
@@andrewchou9099 If this product is a cyber gun product packaged in a yellow box, it will be a chrome ver. In that case, use a pickal to polish it. It'll be similar to TM's. arca.live/b/airsoft2077/10622700
Hi. Plaese help me. I want to remove the slide of my W.E D.E. but when i already released the slide pin, only the outer barell was remove and the other part(nozzle slide) remain. I cant remove this part..please help me. my gun is a silver edition. I think its hitting on something. Do you think it has also another lock for it?
@@dredslikerasta7360 well, i think you're going to have to force it off a bit, using your palm and slap push the slide off. if it's not come off so i think you're going to have to make a video of the issue and let me and other see it so we will be able to help you out.
Hi. I have issues since i replaced my bucking and inner barrel. It drops bb's whenever i point it downwards. I replace it by an autobot 75° maple leaf hop rubber and 138mm crazyjet maple leaf inner barrel.
@@dredslikerasta7360 the inner barrel is wobbling that's why the bb shoot downwards (like you aim for forehead, you hit the nose, something like this) try to stabilize it. what i did is that putting an old hop up rubber and shape it a bit and put in on the inner barrel or you can use the stabilizer like this one... ruclips.net/video/1xuktGk60j4/видео.html
@@dredslikerasta7360 now, we must locate what cost the gun to shoot downward. try the stock inner barrel with your autobot to see the result if it's not shoot downwards so it would be because of the inner barrel if it still shoot low try crazy jet with stock bucking.
@@andrewchou9099 i also already tried to put back the stock hop rubber and inner barrel. It is wont drop the bb's when pointing down. I tried to use the crazyjet and stock rubber. It wont fit on the barrel. I also tried to use the autobot with the stock inner barrel. It wont fit. I thick its not compatible with each other
mine has not yet broken, I think the outer barrel is pretty solid. the slide is quite light for my taste (I heard it's made of aluminium) so when the balance of slide and outer barrel is good, it should be fine. also since kyairsoft supply all WE gun parts so yeah I wouldn't be worried.
![Kodak Black - Catch Fire [Official Music Video]](http://i.ytimg.com/vi/A4ch-olIuZo/mqdefault.jpg)
Thank you for showing us. I thought I had to buy another upper receiver just because I thought my hop up was broken. Turns out, I just need to screw in more
Using a standard nub with a maple leaf bucking is less than ideal. A concave nub will allow you to get the most out of the design of maple leaf bucking's concave contact patch. Even a soft m-nub would work. I know it looks like a kinda tight fit in there but even if it takes modifying the arm by filing down the fangs it would likely be worth the performance gain, and it can be done without impacting the function of the hop up adjustment screw interfacing with the arm. If you didn't want to modify the hop arm, a "fishbone" style h nub would work too. Out of curiosity I've tried using standard stock nubs with Maple leaf buckings and you definitely wind up leaving performance on the table.
Omg finally someone did it I didn’t know what to get but finally do thank you
My safety doesnt work anymore any tips
What key do i have to use to adjust the hop up? I can't find info on that anywhere. Is it a 1mm hex?
1.3mm
I want to get one like this. Is this from the company Tokyo Marui ?? I hope you give me a reliable website to buy it
For some reason mine has a really hard time releasing magazines. I don't really mind it the mag getting snagged when you try to load it, but I hate it when I empty a mag and the gun just doesn't wanna give up it's magazine. Should I file down the mag release thing, or is that a bad idea?
I filed mine using a dremel and it goes in smoothly and the mag release is much easier to press compared with the stock
Is that normal that even with fully adjusted hop up 0.2 bbs drops very fast? like max 30 meters ... maybe not even this much. 0.3 will drop like affter 10 meters. Not sure whats the problem here. Maybe new hop up rubber?
Zymerix that's not normal. Mine can shoot like 40 meters before it flies off or drop down, up to your adjusting.
@@andrewchou9099 already fixed it. I overadjusted hop up so the rubber slowed the BB drastically so it has not much momentum left. Didnt even knew you can overadjust it to this degree
Zymerix if the hop up adjuster is allen key or something similar, you can overadjust it but if the hop is wheel then it can't be overadjusted.
is this the chrome version or the silver?
more like a silver. it's not so shiny like the TM one.
@@andrewchou9099 If this product is a cyber gun product packaged in a yellow box, it will be a chrome ver. In that case, use a pickal to polish it. It'll be similar to TM's.
arca.live/b/airsoft2077/10622700
What is the rubber spacer you used to reduce barrel wobble?
I used old bucking
@@andrewchou9099 great idea
How did you get the orange tip off?
we don't have orange tip policy here in Thailand.
Is that Maple leaf rubber fit for stock inner barrel?
Yes, it is.
which degree of the rubber do you recommend? 60 or 70
60 degree works best on my DE
Do you use Autobot or Decepticon? and which one is better for DE?
@@isaj.8650 if you prefer heavier BBs then Autobot, otherwise Decept.
How long is the inner barrel?
the stock barrel is 133mm
What's the size of hex key in mm
Couldn't recall, i already sold the gun. They have the hex key in the package.
@@andrewchou9099 i tried with 1,5 but it's too big...maybe 1...or something in between
@@Loud_Silencer i did some research for you, it's 1.3mm
Thank you, Andrew
Hi. Plaese help me. I want to remove the slide of my W.E D.E. but when i already released the slide pin, only the outer barell was remove and the other part(nozzle slide) remain. I cant remove this part..please help me. my gun is a silver edition. I think its hitting on something. Do you think it has also another lock for it?
did you remove the magazine?
@@andrewchou9099 yes i remove the magazine..but still dont want to come out
have you ever remove the slide from the gun before? or is this the first time?
@@andrewchou9099 its a first time. I just bought it last week
@@dredslikerasta7360 well, i think you're going to have to force it off a bit, using your palm and slap push the slide off. if it's not come off so i think you're going to have to make a video of the issue and let me and other see it so we will be able to help you out.
What is the piece you replaced?
I know i am 10 months late but It is a new hopup rubber.
@@zplashy3764 thanks :)
what does it do?
Original finish?
yep
Hi. I have issues since i replaced my bucking and inner barrel. It drops bb's whenever i point it downwards. I replace it by an autobot 75° maple leaf hop rubber and 138mm crazyjet maple leaf inner barrel.
I really need help
@@dredslikerasta7360 the inner barrel is wobbling that's why the bb shoot downwards (like you aim for forehead, you hit the nose, something like this) try to stabilize it. what i did is that putting an old hop up rubber and shape it a bit and put in on the inner barrel or you can use the stabilizer like this one...
ruclips.net/video/1xuktGk60j4/видео.html
@@andrewchou9099 i already put a stabilizer on the inner barrel
@@dredslikerasta7360 now, we must locate what cost the gun to shoot downward. try the stock inner barrel with your autobot to see the result if it's not shoot downwards so it would be because of the inner barrel if it still shoot low try crazy jet with stock bucking.
@@andrewchou9099 i also already tried to put back the stock hop rubber and inner barrel. It is wont drop the bb's when pointing down. I tried to use the crazyjet and stock rubber. It wont fit on the barrel. I also tried to use the autobot with the stock inner barrel. It wont fit. I thick its not compatible with each other
The outer barrel broke easily
mine has not yet broken, I think the outer barrel is pretty solid. the slide is quite light for my taste (I heard it's made of aluminium) so when the balance of slide and outer barrel is good, it should be fine. also since kyairsoft supply all WE gun parts so yeah I wouldn't be worried.
@Giovanni Degliorsi i find this guy everywhere, pretty sure its the same fella, arnies airsoft, youtube etc, he just got a shit barrel, bad casting.
no language，but informative
You did this, yes. But what does it do?
8:38-9:35 😆🤓
Babies toys🤣😎