Dillon - I have a 1973 406 that I am having problems with the hi-low shifter stuck out of position. I changed the front brake cylinders, bled the system and slave to the clutch...but...no go...Love your machines! Would love to talk some time!
Is it the 20 speed transmission, and is it the range selector or the one that engages the ranges? The range selector itself has a set over in the pattern
Mercedes /Puch 406 so nice truck. 1/18 scale Unimog 406/403 ready to run RC model , very nice body and 4wd system, it is good for play both indoor and garden or display at home or at office. (8) FMS 1/18守望者(Unimog)官方影片 - RUclips
Kevin - trying to source a used BOSCH belt driven pump for our 406 - lost the hydraulic functions on the 3pt while doing road work. Do you know of anyone who is selling parts?
Those mogs look in great condition for early ones! I’m not fully up on the “case” spec mogs but the under belly pto and cascade box is a great feature. Do they have the 1000/540 pto box? If your going to extend the cab don’t forget the chassis flexes, you don’t want to pull the cab apart by bolting it all down lol 🙂
I do have the 2-speed PTO. The main difference with the Case models was how they were spec'd out. Schmidt plates and generally heavier build. Not quite sure how the cab is getting mounted but I will take that into account. Thanks.
@@DillonHFM I used to have 2 mogs. One was a schmit converted forward slope cab snow blower and the other a modified cabriolet ag spec. Dunno if you’ve seen the 2 brackets either side of the chassis (ones just behind the fuel tank) these are the original rear 3 point body mounts (there should be another single mount in the middle rear crossmember but might be off) depending where your cab goes you might be able to use them. The case body looks like it’s directly mounted to the chassis??
I’m glad I found this video. I look forward to seeing them in person. Toby
Nice machines 😊 l have one of the ones that l had on active duty, a FLU419. l am on the look out for a front plow set up for it.
I have never gotten to really examine a FLU419, I have heard that the mounts are different, do you have a Schmidt hitch on the front?
Dillon - I have a 1973 406 that I am having problems with the hi-low shifter stuck out of position. I changed the front brake cylinders, bled the system and slave to the clutch...but...no go...Love your machines! Would love to talk some time!
Is it the 20 speed transmission, and is it the range selector or the one that engages the ranges? The range selector itself has a set over in the pattern
always happy to talk mogs,
Mercedes /Puch 406 so nice truck.
1/18 scale Unimog 406/403 ready to run RC model , very nice body and 4wd system, it is good for play both indoor and garden or display at home or at office. (8) FMS 1/18守望者(Unimog)官方影片 - RUclips
hi there nice toys sawmill jeep firewood unimogs ha i think i need to catch up john
There are a few toys, I saw that you have some jeep fc's, I used to have one of those. cool trucks, hard to find a windshield for one though
@@DillonHFM hay there just sold a windshield . along with 5 parters merry christmas john
Kevin - trying to source a used BOSCH belt driven pump for our 406 - lost the hydraulic functions on the 3pt while doing road work. Do you know of anyone who is selling parts?
Those mogs look in great condition for early ones! I’m not fully up on the “case” spec mogs but the under belly pto and cascade box is a great feature. Do they have the 1000/540 pto box? If your going to extend the cab don’t forget the chassis flexes, you don’t want to pull the cab apart by bolting it all down lol 🙂
I do have the 2-speed PTO. The main difference with the Case models was how they were spec'd out. Schmidt plates and generally heavier build. Not quite sure how the cab is getting mounted but I will take that into account. Thanks.
@@DillonHFM I used to have 2 mogs. One was a schmit converted forward slope cab snow blower and the other a modified cabriolet ag spec. Dunno if you’ve seen the 2 brackets either side of the chassis (ones just behind the fuel tank) these are the original rear 3 point body mounts (there should be another single mount in the middle rear crossmember but might be off) depending where your cab goes you might be able to use them. The case body looks like it’s directly mounted to the chassis??
Subscribed!
any intresrest in selling one
Was planning on getting them a little spruced up first. How much?
Zu verkaufen?
Do you want to make an offer? They are in the United States.