What gen do you have? I have gen 3 Glock 19 made in USA my favorite gens of the 19 are gen 1 2 and 3 I hate gen 4s and 5s. I would love a gen 1 or 2 Glock 19
@@garyrintelmann1183 those are good to I just dont like the look or apparence of them over the other generations especially the slide and the gen 5 mags you can't use with other generations like the 3s in 2s in 1s
@@jcastle614 It's delivered the way a military instructor would. It's precise, organized and thorough. Law enforcement officers also share information in a highly organized, precise and thorough manner. He's great.
I got the big Otis cleaning kit last Christmas.. I’m a hard person to buy for an was by fare the best present and cleaning kit iv ever owned. The old hippies kits are stored away now
What was the MC-7 bore cleaner on the right hand side of the screen there for. He never used it for the demonstration. If not, why have it in the video?
@@OtisTechnology thank you for the reply. Just noticed that I had a type error... 19mm should have been 9mm. You probably figured that out. Thanks again.... I used two patches initially but felt really tight. Just did not want to damage the bore.
If u dont clean all the cleaner off ur gun might that be the reason why it builds rust? I cleaned my gun and came back to look at it a day or 2 later and it had orange dust on it like a rust type residue but it wiped right off. Was it because i didnt take all the gun cleaner off the slide left it kinda wet?
This depends on what you were using. What were you using? With FP10 CLP or O85 CLP you do not have to wipe it off but you should remove excess that you don't want on your hands, clothes or in your holster. CLP cleans lubricates and protects from rust. If you're using "cleaner" like a Quick Scrub type of product you need to apply CLP after because it is taking away all lubricant along with the fouling and debris. Bore cleaner shouldn't be used on the exterior of the firearm; it is intended for the bore only and should be followed by a lubricant, such as CLP.
Cleaner needs to be on patch on all sides of patch. If barrel has lots of rounds through it may want to presoak inside barrel and let it sit for a while.
Lots of people just prefer one over the other, nylon bristle brush works fine, I personally like the copper bristles ,copper is much softer than the steel your barrel is made from, so it won't scratch (damage) your barrel. Nylon bristle are just cheaper to manufacture than the more traditional copper ones. Either will be fine, just keep your firearm clean it's the most important thing. Hope that helps you out. Good shooting!!
The brass bore brush is softer than steel and will not cause any damage. The Otis Professional Cleaning Kit for Glocks comes with 3 bronze & 3 nylon bore brushes
I ALWAYS watch this video when I clean my Glock 19. It's the best.
What gen do you have? I have gen 3 Glock 19 made in USA my favorite gens of the 19 are gen 1 2 and 3 I hate gen 4s and 5s. I would love a gen 1 or 2 Glock 19
@@10_Per_Gram Gen 5. It is the first handgun I purchased, after reading reviews on a decent gun for a handgun beginner. I like it.
@@garyrintelmann1183 those are good to I just dont like the look or apparence of them over the other generations especially the slide and the gen 5 mags you can't use with other generations like the 3s in 2s in 1s
I'm probably odd, but I actually enjoy cleaning my guns. It's my zen place.
You’re not alone, my cousins and myself know what you mean.👍🏼
Hellyeah, after every range session ik what you mean
Excellent video. As a beginner, I found it very easy to follow.
Glad we could help!
Comprehensive demonstration of how to clean your glock.
Good video for beginners especially, but that delivery, lol thanks Mr Roboto ! 😉
😂😂😂
@@jcastle614 It's delivered the way a military instructor would. It's precise, organized and thorough. Law enforcement officers also share information in a highly organized, precise and thorough manner. He's great.
Great Explanation Steve! Thank You!
I got the big Otis cleaning kit last Christmas.. I’m a hard person to buy for an was by fare the best present and cleaning kit iv ever owned. The old hippies kits are stored away now
Thank you for your service, Steve.
Very well done Steve and thanks for your work. ✌️👍🇺🇸
Such a wonderful informative video on the topic. Thanks a lot.
Thank you!
What was the MC-7 bore cleaner on the right hand side of the screen there for. He never used it for the demonstration. If not, why have it in the video?
Informative, though black pistol in front of black shirt does not provide good contrast to fully see the process
Very well demonstrated… 😎
Glad you liked it!
Great video!
Thank you!
Great video brother u have a new subscriber ✊
Excellent video!!!
For glock 19 Gen 3 19mm using round 3 inch Otis cotton patch.... Do you use one or two patches at a time to clean inside of bore?
2 patches are ideal but you can get by with 1; if you use the Panoply patch you only need 1 becuase they are very thick.
@@OtisTechnology thank you for the reply. Just noticed that I had a type error... 19mm should have been 9mm. You probably figured that out. Thanks again.... I used two patches initially but felt really tight. Just did not want to damage the bore.
Awesome presentation!
Glad you liked it!
If u dont clean all the cleaner off ur gun might that be the reason why it builds rust? I cleaned my gun and came back to look at it a day or 2 later and it had orange dust on it like a rust type residue but it wiped right off. Was it because i didnt take all the gun cleaner off the slide left it kinda wet?
This depends on what you were using. What were you using? With FP10 CLP or O85 CLP you do not have to wipe it off but you should remove excess that you don't want on your hands, clothes or in your holster. CLP cleans lubricates and protects from rust. If you're using "cleaner" like a Quick Scrub type of product you need to apply CLP after because it is taking away all lubricant along with the fouling and debris. Bore cleaner shouldn't be used on the exterior of the firearm; it is intended for the bore only and should be followed by a lubricant, such as CLP.
Thank You for this Video.
Thanks Steve! Great job.
W, FOD
Thanks Steve.
Thank you for your service and your help!
Cleaner needs to be on patch on all sides of patch. If barrel has lots of rounds through it may want to presoak inside barrel and let it sit for a while.
does the copper bore brush scratch the inside of the barrel? should I use the bore brush that comes with the Glock?
Lots of people just prefer one over the other, nylon bristle brush works fine, I personally like the copper bristles ,copper is much softer than the steel your barrel is made from, so it won't scratch (damage) your barrel. Nylon bristle are just cheaper to manufacture than the more traditional copper ones. Either will be fine, just keep your firearm clean it's the most important thing. Hope that helps you out. Good shooting!!
The brass bore brush is softer than steel and will not cause any damage. The Otis Professional Cleaning Kit for Glocks comes with 3 bronze & 3 nylon bore brushes
The ripcord is that thorough???
Yes, Ripcord is a very effective bore cleaner.
Are you hiring Right now or not at all?
Perfect!
Amazing.
Heh…. Wait wait wait. You clean your glock?
Yes of course, You should clean and lubricate all firearms to ensure they work properly when you need them to.
Thompson Brian Jones Helen Rodriguez Nancy
Witeeteru
what about using gloves? lead leads to cancer, safety first chief.
Great content and great experience. Your delivery is very monotonous and difficult to listen to.
I appreciate that!
Great response