How to Cut a Log to Bowl Blanks - Woodturning
HTML-код
- Опубликовано: 27 июл 2020
- In this video I show how I cut and seal a log to bowl blanks.
Hope you will enjoy the video
My Website
www.bybrandstru...
Sponsor:
www.traedrejerb...
Hydrowax C or 115
www.traedrejer... Хобби
Hi, Kim...very good instructional video. I use Titebond glue, full strength, for sealing end grain...I’ve found it better than Anchorseal or paint at preventing splitting.
Hi Rick.. Thank you very much for watching .. I do get some cracks sometimes with the mixture of 40 % water and 60 % glue but not much .. I would love to be able to use Tigetbond glue, but for some reason it have the same price as Gold pr. once here in Denmark 😂😂 but I will try to use clean glue next time and mixed glue and check the differens .. thank you for the tip .. Have a great day and stay safe 😀😀
I have also mixed the glue with some melted Parafin wax which is very inexpensive. Also, I have used the pruner sealer you can get at almost any hardware or nursery and it seals nicely but is a little tar like at first and black. When it dries it is easy to remove and seals tight.
Thank you for the tips. Your video and explanations was very clear.
thanks for watching glade you liked it -- happy new year
Привет!!! Огромное спасибо !!! Буду пробовать, распиливать таким способом яблоню !!!
You are wery welcome.. have a great day and stay safe :-)
Thank you for your video was very helpful
Regards
Steve UK London
You are very welcome, stay safe and have a great day :-)
Thanks for making this video, sir. I enjoyed this video.
Thank you very much, and thanks for watching .
Thank you for showing this. I found it very helpful
Hi Lynn, you are very welcome, glade it was helpful.. Thank you for watching... 😁 Have a great day and stay safe 😁😁😁
Try and tighten the chainsaw chain slightly while sharpening, not so tight that its hard to spin but so it sits tighter on the bar as you stroke the file through. It will give a nicer edge and makes sharpening much easier
Thank you very much for the tip, and thank you for watching .. stay safe :-)
That was so great, well explained,
Thanks.. and thank you for watching .. have a great day and stay safe
Thanks for Sharing Kim. Lately, as I now have a Bandsaw Mill I've been using that to cut Blanks down to size and remove the Pith, then chainsaw them to length. For sealing I use old wax from my wife's candle's, just throw them into an old pot on the fireplace to melt the wax, and paint that on.
That's a great idea with the candle wax.. I hope to get a bansaw mill some day .. just need to convince the Boss :-) but she will come around at some point 😬 Thank you for watching .. have a great day and stay safe 😀😀
I learnt to use the candle wax from local guys that use a different type of Mill (Lucas Mill), when they would do unseasoned timber, they would coat the ends of the log with wax as it's quicker and easier than trying to coat each board after cutting.
@@DiemenDesign sounds good i might have to try that some day .
Very useful. Thanks.
You are welcome .. have a great day and stay safe ..
Excellent video - thanks for sharing
you are welcome. thanks for watching .. have a great day and stay safe
Thank you it was a great help
You are very welcome :-) have a great day and stay safe, and thanks for watching.
I use gloves when sharpening my chain as years ago, the file was a tad dull and slipped and I gashed the back of a finger. I also use kevlar chap pants, as a doc once told me that cuts are too common in rural folks. All in all, a great presentation. Thanks, Kim.
Hi John, thank you for the comment i really appreciate it , i most see if i can get som cutting pants some day :-) ..Have a great day and stay safe 😀😀
@@WOODTURNINGBYBRANDSTRUP Kim, I'm about to update this smallish Husqvarna saw for a larger Stihl for bucking bowl blanks. Firewood for a stove is one thing; blanks for outboard turning are quite another. Priorities. hahaha
@John Otvos Well ofc it is :-) i hope to by a Husqvarne 572 XP G some day .. then it is both blanks and Planks for other nice stuff ..
@@KBO-kz9le That's a giant of a saw. I'm looking at an older 029 Stihl.
Very informative. Thank you.
You are very welcome .. and thank you very much for spending time to watch my videos .. i really appreciate it 👍 Have a great day and stay safe 😀👍
Not lazy or cheap here. But I have found stacking rounds before ripping with chainsaw slows checking. I will alternate rounds once in while. It is like putting tree back together and one gets exercise when restacking rounds.
Cool -- stay safe
Good video, thanks
You are welcome and thanks for watching .. have a great day and stay safe :-)
Very informative my friend. Thanks.
Glad you enjoyed it.. Thank you very much for watching my video... Have a great day and stay safe 😀😀😀
Thank you!
you are welcome .. thank you for watching..
Thanks very awesome info sir! 👍🏼
you are welcome .. thanks for watching .
I use two different products to seal the blanks. One is Pentacryl which I used in this video: ruclips.net/video/IaRrRkPpreE/видео.html and the other I prefer is like what you have and we call it Anchorseal, which is a wax paint.
Ok cool thank you for the tip.. Som Nice videos you make..
@@WOODTURNINGBYBRANDSTRUP Thanks!
With smaller diameter logs i just cut down the middle through the pith. I turn the rest off. I dont have much use for spindle blanks.
Hi, Thanks for watching, I do the same with the sall logs, somtimes I cut a little V or just a small grove also to take out the pith .. have a great day and stay safe :-)
@@WOODTURNINGBYBRANDSTRUP Been prepping my stash of logs the last few days. Glorious wood!
Excellent
Thanks ! Stay safe and have a great day :-)
How long do you wait until you turn the wood?
I normally twice turn (Rough Turn) so some of it i turn within dayes or weeks some of it i just keep for months/years .... you can see my video about the kiln for fast drying .. Thank you for watching stay safe ..
:-)
👍👍👍, my chainsaw need sharp too,🙂. What kind of wood that you did saw, it looks like camphor wood, I'm not sure. 😅You have so much wood, so enviable...
Hi, the wood is Oak.. and yes a sharp chain is important :-) thank you very much for watching .. have a great day and stay safe . 😀
thank you so much, I like oak, it has beautiful grain and color,🙂🙂
@@gaowoodlab It sure dos :-)
... your cutting FLAT across the chain ????????????????! No way
Some folks make chips, some make dust....
well we can not all be a clever and proff. as you.. :-) have a great day and stay safe ..
Very good vid, exactly what I was after. No nonsense always wins. New sub here. Are you on instagram?
Nope not as active i anwser if somone write. but my company take most my time at the moment .. thanks for watching .. and have a nice day :-)