Sir ji bahut hi fine vedio hote hai aapke.... mere laser me shutter on nahi karte hai tab bhi laser beam head se bahar aata hai to kya problem ho sakti hai...?
Hello friend, how are you? I have seen your video and it seems very interesting, now I ask you how I know that the source is damaged and how I can prevent this damage that you describe in the video? How do I know that there was inter_laser reflection? I have a 1000w source and I have problems with the cuts because it only cuts 1mm at 30 millimeters per second when I know it should be much faster. Thanks for your help.
Your problem is probably related to the cutting head lenses quality, gas quality/pressure and cutting parameters. What are your laser source and cutting head manufacturers?
Can you help me my machine is not working
We can replace the fiber cable in India itself. So is it repaired?
We will provide fiber laser source cables replacement service
Sir ji bahut hi fine vedio hote hai aapke.... mere laser me shutter on nahi karte hai tab bhi laser beam head se bahar aata hai to kya problem ho sakti hai...?
check whether shutter is on from cutting software
Thank you for your positive response
Where can I get fibre laser cleaning in pune
Is the earthing cause fiber laser source failure?
sir plz tell me waht about ipg overhead error?
Please help me merre machine ka same problem hai koi solution batayen RFL-C2000 hai
I need you help, my Co2 laser machine does not communicate with PC
Kya hal hai bhai theek ho
Hello friend, how are you? I have seen your video and it seems very interesting, now I ask you how I know that the source is damaged and how I can prevent this damage that you describe in the video? How do I know that there was inter_laser reflection? I have a 1000w source and I have problems with the cuts because it only cuts 1mm at 30 millimeters per second when I know it should be much faster. Thanks for your help.
check whether you cutting head is getting hot during cutting , if yes then Contact me
Your problem is probably related to the cutting head lenses quality, gas quality/pressure and cutting parameters. What are your laser source and cutting head manufacturers?
Boss IPG Laser system error kya problem ho skti hai
Bhai omh alarm comming what will do
Good video.how to set machine zero in laser
Bhai mere source mein 15008 mein high temperature ka alarm a raha hai
All axis karne par matchin piche ki taraf ja ke ruk gai aage aahi nahi aa raha hai kya problem hai sir
My company have sam to sam modile 300 W machine the source i convart into 1500W now and my Boss is happy
Sir Mairy machine ye problem kr rahi hy k file run krny per laser nhi niklti wayse button press krmy se nikal rahi hy
Tu to bahut gyani hai, import tumhare through karlo to tum bahut khush ho
Hahaha. Correct
Mcu voltage alarm
My Raycus laser cutting machine is not cutting at high speed. I tried air pressure ,focus everthing . Anyone know the solution???
Sir aap ne Iss problem ka Solution to betayaa nahi h video mai.
the technology inside the laser source is patented ,so we can not share tht info ,
i told OMH is damaged which is a part
Iska solution to bataen yaar kya hai
trfriend, I am following you but it is important that you translate what you say in the videos, thank youasleccdion
now its done , you can watch it again
Same problem hai sir
nice video sir thank you
Demo virsion comming..why comming demo virsion...
where is the solution
Hi