How To Install Sub & Amp In Stock BRZ/FRS/86

Overall wasn't to complicated of an install, was able to pull it off with using the stock amp harness. Didn't have to change the radio just to install a subwoofer and an amplifier in the BRZ.
Here is the amp I used: bit.ly/34xiIrM

[@touchofturbo]

While you're down here you might as well slap that like button and hit subscribe, it's free and I appreciate all of you who do!

[@wolfman5162]

So if i use a line converter i would tap that remote turn on into the factory amp turn on and leave the remote turn on slot on the new amp empty ?

[@shanealfred4516]

Do you know what color power and ground are on the factory amp ?

[@TheRed86]

Nice clean ride

[@jdmchickkustomz9417]

So is that factory amp going to have enough power to run both amps?

[@BASA54]

I just did this in 93 degree heat… totally worth it tho

[@touchofturbo]

Definitely worth it 👌

[@MissionFailed2]

Trying to figure out how to remove those side panels where you ran the wire lol.

[@touchofturbo]

Which ones? The one by the front floorboards or the back passenger? Most of them are all held in by clip

[@MissionFailed2]

@@touchofturboall of them. Yeah, I figured them out. All are clipped in. Was pretty easy to take them out. Thanks for the video.

[@temptsau1224]

Where the factory am is. Ummm mine isn’t there??????

[@OfficialTK]

Did you figure it out, mine isn’t there also. Im thinking of just running to the headunit

[@OfficialTK]

@Trey Henson yeah that was the go. Prefer it that way anyway as I can adjust the sub from the headunit

[@Jay-zr2cm]

Which side skirt spoilers do you have??

[@Ashish-ql1ue]

so now will your door speakers are they going to be running on the new amp as well.

[@405resells6]

No, the door speakers will continue to run off of the factory amp. You're just tapping into the wires not cutting them

[@eduardoatillo5287]

Where's the result?

[@zombieassassin974]

Idk what I’m doing

[@MrMjrcruz]

So the white connection going to the amp on the sub are the wires you spliced into the factory amp?

[@touchofturbo]

Yes that's correct. The amp from Walmart comes with that little connection adaptor. You'll use that to tap into the factory amp

[@david_hong1250]

how much was it for everything?

[@touchofturbo]

I used an old sub and box I had laying around, but the amp itself was $60

[@ericworten3701]

If you're going to spice wires do it the right way don't use t taps

[@touchofturbo]

There's nothing wrong with Tap Splices, this allows you not to have to cut any of the factory wires. I'd rather not cut them as you can't go back from that

[@touchofturbo]

Been using the Tap Splices for almost a year now with zero issues

[@ericworten3701]

@@touchofturbo I mean it really depends on the application I guess, as far as speaker installation I don't use them but they probably wouldn't give you issues.

[@MrSodaBelly]

Powering just the sub? Bruh fuck that. The factory amp is trash. Should’ve replaced it