2240XL Trigger Tune and reassembly (Part 2)
HTML-код
- Опубликовано: 13 сен 2024
- This is the second part of the Trigger Tuning an reassembly video for the Crosman 2240XL and similar pistols. In part one we disassembled the grip frame and trigger assembly to perform some basic upgrades. In this installment we reassemble the pistol.
Wanna support the channel?
Support us on Patreon at:
www.patreon.co...
Or send us a SuperThanks through RUclips.
Not in a position to support financially? No worries! Your likes, comments, subscription & views all help.
Shoot straight & be well my friend.
For anyone who has any of these airguns, this video and part 1 would be good ones to save in case you ever want to work on them. These were so clear and precise, they make it easy. Thank you Al.
Thanks Jim! Much appreciated.
I fully agree…so much knowledge in these videos.
@jimmunch5796 thanks for the heads-up!
good recommendation
Great info. I love tinkering with stuff like this to smooth things out !
if you really like the way these shoot you need to convert one over to hpa with a 850psi regulated bottle you will fall in love with it all over again. ive got one with the buttstock reged to 1200 psi with a repeater breech i machined and i have feed squirrel to the family with it from 10 to 40 yds consistantly for 4 years now and i have a fx but this little fella is just so much darn fun so i use it its shooting 18 grain pellets right around 700fps and 15s right around 750 fps thats right at 20 ft lbs and works great for pigeon squirrel or rabbit with no issues if you put the pellet in the brain box where it belongs and its just as much fun shooting paper and cans or plastic bottles pumped up with air
I liked the first part
I appreciate the feedback. Thank you.
A dab of vaseline on the detent spring will help keep them in place.
Great tip have not done that in a while and I should have mentioned it. Thanks
@@AlsAirguns I knew you just forgot, pretty sure I've seen you do it before..
@@gwhitfield4239 Thanks, I appreciate the call out though. Because some folks only watch a few video but will often read or leave comment in ones they watch. So this is always a cool place to help out. Thanks again & enjoy your weekend.
@@AlsAirguns you have a good weekend too!
great advice
Transfer port o rings or 1/8 in poly tube also can help seal breach a p rod end cap for hammer spring adjuster and prod hammer for adjustable striker. 👍👌✌️💯
Yes, that's the same grip frame and adjustable trigger set up that Crosman uses on the 2300 series as well. It's actually the same grip frame with the brass adjustment pieces aded and a different spring. Something I forgot to mention about the upgrade I installed is that in addition to reducing the pull weight, it also limits over travel by blocking the sear. For an easy and inexpensive mod, I'm pretty impressed.
Sir, thank you so much for your 2 videos....they are extremely very well made...my sincere compliments from Italy. Now I really know everything I was looking for.
Very Respectfully
Fabio
Thanks Fabio. Glad you like them!
Hello… good video… I have purchased a p-Rod grip frame to switch out with the factory grip… I installed it, but it doesn’t want to cock…. Is there some trick to assembly?
Make certain that you are using the appropriate breech screw location and associated hammer. Hammers designed to work with the rear position have a scallop cut out of the face to clear the breach screw. The 1701 hammer is a different style where this is not a concern.
Great clips. I've just subscribed. I have a question though. Is the 2240XL trigger frame metal or plastic and if not do any of the 2240 or 2230 pistols have metal frames ?
Yes 2240’s & 2300 series Crosmans use a metal grip frame which includes the trigger guard. The trigger on those pistols is metal as well.
@@AlsAirgunsyou're usually very timely on your responses. Much appreciated!
👍🏻 Thanks 🙏
do you have this drawing thanks
Yes I have, you can down load parts drawings on the Crosman Support site.
And that gripframe is definitely metallic ? It looks so much like plastic….
Grip frame was historically metal. They changed the screw-down side plate on one side to plastic years ago but the frame is some soft “pot metal” which I’ve often sanded and refinished. So unless it just changed & I’ve missed it the 2240 and 2300 pistols have a metal frame.
To je nemehlo.
You think? 🤔
@@AlsAirguns i dont
Well, I'll tell Ya Al, with all the Jiveass-Drugstore Cowboys out there today in the Cloud , self proclaimed experts on everything, they be !
It is right pleasent too run into ah real Gunslinger worth there salt, that not only knows what he's doing !
But also is ah Damn Fine Communicator, & Video-Journalist too boot 🤠Yee Haw 🤠 -- 🥇 SHARPSHOOTER.....
@Bob Wershing, Let me tell you compadre if not for the encouragement folks like you, this hombre would’ve put his keyboard in the ground long ago. 🤠🎊