Ortur Laser Master 2 - 20W Engraver. Build, Test & Review.
HTML-код
- Опубликовано: 25 июн 2024
- In this video I build and test an Ortur Laser Master 2 - 20W laser Engraver. The laser has an optic power output of 5.5W.
Aliexpress techydiy.org/short00002
Amazon amzn.to/3lZlhuJ
Amazon UK amzn.to/3oP9W2b
Amazon DE amzn.to/3oXpMYF
Air assist bracket www.thingiverse.com/thing:452...
1mm 3d printer nozzle bit.ly/3iJyLbv
6mm brass tube bit.ly/36ZppTl
(I enlarged the end of the brass tube and then screwed the printer nozzle into it)
Some of the above are affiliate links, if you click on them and purchase an item, I might receive a small income. It doesn't cost you anything extra, but it does help me to make more videos.
0:00 Introduction
0:51 Limit switches
1:05 Laser power output
1:22 445nm laser diode
1:44 Pcb teardown
2:02 STM32 microcontroller
2:21 Safety features
2:52 HR4988SQ stepper motor drivers
3:06 Documentation
3:25 Laser safety
3:34 Hardware build
9:18 Software install
9:28 Usb driver install
10:09 Lasergrbl
13:23 Import image
15:19 Inkscape
16:31 Cut foamboard
17:24 Lightburn
21:35 Engrave plywood
22:28 Engrave ceramic tile
24:21 Engrave R2D2 v2
25:15 Engrave mirror
25:55 Engrave acrylic
26:02 Engrave leather
26:20 Engrave painted steel
26:36 Engrave denim cotton
26:55 Cut acrylic
27:17 Air assist
27:49 Cut 6mm pine wood
28:26 Air assist v2
28:30 Cut 6mm plywood
29:12 Cut denim cotton
29:34 Cut 1mm leather
29:50 Conclusion
#ortur #laser #lazer Наука
I don’t think review videos can get much better than this. Thank you so much!
Can it cut paper materials?
That's by far the clearest presentation of the Ortur Master 2 I have yet seen. Mine is on the way so it gives me time to prepare. You include a lot of useful information. Many thanks.
Well? Do you like it?
@@DavidALovingMPF102 - I'm wondering that as well.
I'm sitting on the edge of my seat in suspense to your review!
You got a squad waiting on the feedback bud
More than a squad now
Wow, I think this is the most complete and comprehensive review/explanation I've found online, which is of great value for a beginner like me.
Thanks so much for that!
One of the best overviews of this I've seen, you covered things that no one else seems to, and I'm looking forward to using mine when it arrives.
agreed !
@@Damian-Church-NZ Yes it did! Very nicely.
Excellent video, Thank you! I used this to set up my unit today and I'm already engraving .
That was a fantastic review, thank you from a first time viewer.
This review is so good. I think showing the full range of use is the most informative I've seen.
I just bought an Ortur 15W Master Laser 2 and your video helped me so so much to get it up and running. The best hint was that I have to hold the shift-key when I want to turn on the laser while running along the frame. Many thanks!!
Master, you did an amazing job for us! thank you!!!!!!!!!!!!!!!!!!!
Absolute smash out of the park review and demo. Otur should be paying you.
I'd talked myself out of getting this but you answered every preliminary question I had. Now I actually see the NEED for this in my project and it's an entirely different perspective.
My budget battles are between 3D printer resin supplies or getting additional hardware. I think I'm sold. This is an investment.
Thank you so much for the great video. I muddled through 5 or so USELESS videos before finally finding what I needed and more in this video. Concise and thorough, excellent video!
Thanks
Excellent video demonstration and tutorial. Thank you, as you are the first person I actually understood, becuase you didn't miss a step while others assume too much. Your a genious. Thank you
The thoroughness of this presentation is impressive. I ordered the "20watt" version based on a first viewing. I appreciate your clarification of input versus cutting power, as well as a live demo of what can be accomplished with this unit. The Ortur is preferable to the similarly priced Chinese K 40 CO2 lasers IMHO because the K 40s, while more powerful, the build quality and included components seem spotty at best, and the the setup is more difficult. Many CO2 lasers tout pass through capability, a feature that would obviously be easy to implement. The easy customization of an extrusion based frame makes it easy to implement changes to expand capabilities. If this proof of concept laser works for me, I will likely order a larger more capable FullSpectrum machine, while retaining this surprising capable machine.
Thank you!
This has been a great and thorough review. Thank you. I'm suppose to be starting a new job with this laser so this is very helpful before I actually use it.
How has it been for you?
Woah you can engrave clothes! This is a whole new stuff for clothes design!
Have y tried ?
Brilliant video, I ordered the 20W last night and this video will be on repeat when I build it!
Now that is what I call a review. Damn good.
Price?
I watched all of the videos on this laser and your Review and attention to detail is by far the best! CHEERS! And Thank you!
Thanks
The amount of work dedicated to make this video.. that isn't just a review of the ortur laser cutter, but basically a complete guide on how to use one, and a really good aditionally.
Thanks for your work, really clean presentation!
Glad it was helpful!
I ordered mine and decided to look up some videos for a leg up and im so freaking excited. I just got mine for wood but knowing it works so well on other materials like mirrors is opening up so many new ideas for me. Great video and very thorough.
contact me, show you something you interested.
How are you liking it so far?
World needs more reviews like this one :D
Clearly you didn't actually watch the video where I explained the difference between input power and optical output power. I find that with stupid people they react without thinking or researching, they act like a dog, see something, react to something, except you can train dogs. Here boy have a dog biscuit and fuck off.
As usual, brilliant video. no chit chat only relevant info..
Thanks
Wow, this is the best review of any product I've ever viewed! Your audio is flawless, your descriptions are perfect, the procedure order is excellent.
contact me, show you something you interested.
This is SUPER helpful. Definitely have sold me on purchasing it! They should add this video to their websites for sure!
Thanks for the great overview, I just bought on and I'm looking forward to trying it out
Yu recommend?
Without a doubt, the best review of this machine out there. Well done, and loved watching it.
Thanks 👍
I absolutely agree. Best video on this machine. I'd be willing to watch a couple more.
To say the least, this video is described as creative.
I don't need to install my device except watch this great video.
Thank you from the heart.
This video has to be the most informative video on the whole youtube. No bullshit intros and gibberish. Everything from assembly to usage and control. Awesome video. Subbed.
I've been watching your videos for a while now, and have been consistently impressed! You are doing a great job, your production quality is excellent, and you've been a phenomenal help in my journey back into cnc and laser technology. Thank you for everything you do, and keep up the phenomenal work!!!
Glad you like them!
Kudos Sir, above and beyond.
Excellent review and demo of this lasers capabilities. Thank you!
Got this same laser as a birthday gift from my in-laws. Quite excited to start working with it, and ever grateful for such kind in-laws :-P. In the meantime, great to see these sort of reviews on the RUclipss. (commenting for the Al-Gore-ithm)
Holding Shift while resizing will preserve the aspect ratio of your text/images.
Thanks for the video. Would you make a video on how to print a photograph on wood.
Absolutely great review. So clear, so many different materials. So informative!
Bro, this video just saved my life!!! Thank you!!
Kawał dobrej roboty. Dziękuję. Pozdrawiam z Polski
U deserve a olympic medal for this review! Gj sir
Great. Because off this Video i could work with the correct settings and be able to become a good engrave on my blanks... Thank you
You deserve that we all buy the machine. Brilliant Review
This is the best instructional video that I have ever seen. Thank you!
I was considering a FS Muse system, but I wanted to begin to understand the technology before taking the plunge. When i saw this system a while back I thought it's a toy that could not cut more than paper, and so I stayed away. Buying a K40 type laser did not appeal to me although there is a great deal of information on dealing with that type of systems shortcomings. I'm a design engineer, so the upgrade process didn't scare me from the technical point of view, but I did not want to take on another project of that type at this time.
When I found this video, I bought my OLM2 based on this presentation, especially when i learned that it had the capabilities you have shown. Since then, I have been inspired to take the journey, following the learning paths that you linked to.
Thank you.
Excellent information, much appreciated. I'm goin to try this, many years ago I did some wood carving, looks like my creativity will be tested here.
In this video I build and test an Ortur Laser Master 2 - 20W laser Engraver. The laser has an optic power output of 5.5W.
Purchase link:
Aliexpress bit.ly/3kTxgtH
Amazon amzn.to/3lZlhuJ
Amazon UK amzn.to/3oP9W2b
Amazon DE amzn.to/3oXpMYF
Air assist bracket www.thingiverse.com/thing:4524111
1mm 3d printer nozzle bit.ly/3iJyLbv
6mm brass tube bit.ly/3jswznt
(I enlarged the end of the brass tube and then screwed the printer nozzle into it)
Some of the above are affiliate links, if you click on them and purchase an item, I might receive a small income. It doesn't cost you anything extra, but it does help me to make more videos.
0:00 Introduction
0:51 Limit switches
1:05 Laser power output
1:22 445nm laser diode
1:44 Pcb teardown
2:02 STM32 microcontroller
2:21 Safety features
2:52 HR4988SQ stepper motor drivers
3:06 Documentation
3:25 Laser safety
3:34 Hardware build
9:18 Software install
9:28 Usb driver install
10:09 Lasergrbl
13:23 Import image
15:19 Inkscape
16:31 Cut foamboard
17:24 Lightburn
21:35 Engrave plywood
22:28 Engrave ceramic tile
24:21 Engrave R2D2 v2
25:15 Engrave mirror
25:55 Engrave acrylic
26:02 Engrave leather
26:20 Engrave painted steel
26:36 Engrave denim cotton
26:55 Cut acrylic
27:17 Air assist
27:49 Cut 6mm pine wood
28:26 Air assist v2
28:30 Cut 6mm plywood
29:12 Cut denim cotton
29:34 Cut 1mm leather
29:50 Conclusion
Holy wow why is it so cheap off Aliexpress?
Also you are the best reviewer I've seen thus far. Top notch
Just came across this review. This was exactly the level of info I needed to make a decision about this engraver. I appreciate your thoroughness!
Thanks
contact me, show you something you interested.
Thank you so much, guy ! At least a video that treats most of all the materials I could dream to cut and grave, without searching to last and last till the death just to reach unbearable ads. You saved my evening. Best thoughts from Brittany / France
Best review I have seen so far.
Well done! Really makes my apprehensions of buying one go away.
I love your videos very informative and extremely helpful, so hopefully I've just bought one..
Great video. While searching for tips for a new woodworker, I fell down the rabbit hole in a CNC path which led me to 3D printer that led me to laser printers - I enjoyed every minute of this journey - but you led me out of the hole with your well presented, detailed, presentation and I am ready to jump into the laser medium. I am a retired old man with too much time on my hands and I can't wait to add a laser to my toys. Thank you.
Good stuff, have fun.
Really well done! Thanks for this fantastic review!
Amazing job! First time looking at your stuff, will stick around!
Great Video! I ordered an Ortur Master Nov.10th. Cant wait, I wanted to use it for Christmas items, well will du it next year!!
Great Video! I just ordered an Ortur Master 2 today...this is my reference video.
have you got it yet? i just ordered mine last week
Where do you go to order one...?
Best review I’ve seen. Thank you.
Thank you! I think I am going to get this and using lightburn and use it to cut leather with.
Great presentation 👏 clear & interesting it has been a great help. Terry
I was looking for a comprehensive review of 20 W laser engravers and came upon what I consider one of the best for me to make an informed decision on which one to get. You have the gift of very good communication of the essence of what can be rather difficult or hard to get across on something not everyone watching may be familiar with the topic. Thanks for such a lucid and valuable review of a great tool for a DIY'r like me.
I love the tricks and everything you are showing in this video. You earned my Subscription expecting mine in under 2 weeks a laser master 2....
Excellent and thorough review. Thank you.
Very, very informative and enjoyable! Thank you!
Hi what a great find I have spent two days trying to find what software i need to run my brand new ortor just about to give up looking at time wasting u tube rubbish. Then i found yours it answers all my questions how to get started was most important. thank you very much no time wasting, concise and to the point. Thanks so much stay safe.
Excellent video...enjoyed every second of it, from start to end. Very informative and the latter part of the video opened my eyes to new or potential projects that I could use a machine to execute. Thanks again for spending so much time to give your audience a wonderful, well edited video presentation. Excellent job!
Thanks
Now that is what I would call a review...well done.
Thanks
Mine is coming in soon can't wait to have some fun with it.
Well how did it go?
Very helpful video. I am not new to laser cutting, but I just got this model and found your video to be more helpful than the user's manual. Thanks!
Thanks
This video was extremely well done. Thank you.
Fantastic presentation!! Really helpfull, great job! Greetings from Germany
Thanks for making this video! Super helpful.
The best Ortur laser video on youtube!! G8 lens is a good upgrade as well
Thanks. I have been looking for a G8 lens, I cant seem to find any, I will have to import one I guess.
Actually found after another brand (lower priced) model popped up in ads. But by far this is the clearest and easiest to understand. The other one could not find any info or videos. So that made me search deeper. The best product representation I've seen. But shipping time could be improved. Standing by /saving for order.
What an absolutely fantastic product review. Well done and thank you.
contact me, show you something you interested.
I have been considering whether to buy one of these or not. You have made the decision much easier! Thanks for the great info.
amazing review man , you simply explain more than those who sell them or the groups. thank you very much
Thanks
I have to agree with the previous comments, great review and use, and for people setting up this laser very good detail on the settings. Just subscribed to your channel. Cheers.
Concise and very informative. Subscribed.
Amazing review! Very thorough!
One of the best-detailed videos I have seen ..
Thank you! This is the most helpful video for this laser!
Thank you so much for this video.
In the order feedback I recommand your video to all aliexpress buyers who want to buy this cnc laser engraver
What was your experience with Ali express
@@nevillearnold9087 It was ok.The package arrived in two weeks.(November 2020) I buyed from official Ortur store
AT LAST... a video that explains everything about this machine. Been looking at many American videos - all are totally unhelpful. Thumbs up.
The greatest review . Is so helpful . Thanks you so much.
Great video. Very helpful. Thanks!
Superb video! Mine arrived today, and i don't think I'd have assembled it as quickly as i did with just the official user manual. Mine appears to be a slightly later version, and there are a couple of new bits not covered in this video, but they are not covered in the manual either. I'm saving this video as a go to reference guide.
Best information guild from start to finish ,
Excellent video, Thank you!
Very well done. So thorough. Much appreciated!
Glad you enjoyed it!
That looks great. I have a co2 laser that works great bet the work table is much smaller
One of the best, if not the best video I have seen on this machine. All useful & relevant information. You should give lessons on making these type of videos. There would be so much more useful videos out there then, instead of a lot of the garbage there is now. Keep up the good work.
A+ tutorial and video, great job.
Excellent review , very precise and informative
Thanks
I like the magnets from a microwave for hold down weights.!!
Brilliant review! Glad I don't have to do one now.
This is a great laser, ive done a lot of projects with it. Only thing is that the laser lost significant power and no amount of focusing would work. I upgraded the laser to a 30w and its back at perfect. I recommend using lightburn with it.
I recognized this voice and finally placed it, the Gico Geco lol :) great video too btw.
Cool! I've been wanting a new tattoo!!
I want to use this to put images on wallets and maybe some wooden objects. I've also thought about dog tags. This video made me very excited to order this same model. I need to move things in my work space to allow for ventilation. Maybe build a cheap table so I have an expendable work space. Edit: When you did the mirror I nearly shat. Then you just kept going! I am ordering this asap
Excellent video, you covered it all!
Thanks
Outstanding Video. Thank you
Thanks, you helped me a lot!
excellent explanation ! Great Demo!
Thank you