A light switch with NO Wires - Magic! 🪄
HTML-код
- Опубликовано: 8 июл 2023
- Quinetic light switches work by magic. We've used the door contact version to switch a light on when we open the tool cupboard door. The switch harnesses kinetic energy when the switch is triggered sending a radio signal to the receiver which turns on the light.
Explore the full range of Quinetic solutions here
👉hub.efixx.co.uk/quinetic-door-...
#quinetic #lightswitch #electrical 
Наука
![Cordae - Saturday Mornings (feat. Lil Wayne) [Official Music Video]](http://i.ytimg.com/vi/z2GYJua09F0/mqdefault.jpg)
Explore the full range of Quinetic solutions here
👉hub.efixx.co.uk/quinetic-door-switch
That seemed like a lot of wires involved in a switch with no wires.
Switch itself has no wires the controller does
Your tv is plugged in ,correct,you use a remote ,no wires.correct.😊
@@tommym3876 well no. The actual “switch” would be contained in what you’re calling the controller.
@@onelineal9382 yeah you’re on to something. This video is like saying your tv is wireless because you control it with a remote 😂.
@@dustinengle2570 yes the “slave” switch would be in the controller the the “master” is the one with no wires that dictates what the other switch is doing
But the point Is that no wires have to be ran for the other switch making things a little easier
>buy wireless device
>look inside
>wires
The actual switch is wireless and even battery less ... no power required. Works from mechanical actuation of the switch being pressed
@@contytub yeah piezo crystals are nothing new. that is how your dads lighter has worked for 50 years.
I've used quinetic stuff for ages.. Brilliant kit
I love these too. Great invention. Used them loads.
LED light with batteries and PIR sensor. That's all folks.
Sticky pads? They're gonna fall off in a month or two
Those 3M ones are pretty good, got them holding stuff for the last 6 years with no problem
That's where you're wrong bucks, those bad boys last
@@brandonacamarena2197 nope. Just did some last week and the client called me back as half of them had fallen off. Even with an alcohol wipe pre sticking.
@jonhunter8737 they work great for me man, just must be a surface thing with some of em
Add crazy glue to the sticky backs.
Like mama said, *USE YOUR WORDS* _Descriptions would be nicer._
In this application why not just run a cable to the switch and route it out of the way?
Beacuse it's a sponsored video.
@@Solkre82 yes, but find an actual application that makes sense. Where the switch isn't 30cm away and where a cable can be run with no issues.
Simply use a light with a movement sensor
Not always what you want though? 🤷🏿♂️
Nice job Rick 👌🏻
Cool switch, clean install. But I’m seeing quite a few wires in this “no wire” video. 🤔
Not at the switch though, are they?
Kinetic swithes are awesome!
Sure are Gaz loves them
Why hasn't some one come up with a rose receiver,instead of one which you need to hide in an enclosure!
That’s actually a great idea! 😎
Never thought of sticking a wago under the lid. I've always just run 2 core flex into a junction box to deal with the CPC when needed 👍
Good idea! I’m gonna use this for my fluorescent lights in my garage
Bye bye wires 👋🏻
Interested in why you haven't crimped the stranded cables
Push fit connectors
@@hks-lion thanks for confirming mate
Lovely jobly
GENIUS!!
>What a handsome bloke.
>Uses Knipex.
>I'll take some
Cutting the tails off the zip ties with diagonal cutters leaves extremely sharp ends that can slice you open. Twist them off.
He used plumb cuts. Not diagonals.
@@joshespe7985 if you look at the cut end of the zip tie you will see the point that will slice you open. And those are a modified angle cutter.
Retired Master Electrician 42 years
@gerhardschemel3565 those style cutters are meant to cut flush because of the thinness of the blade and the angled edge sits against the cutting surface. I'm not disagreeing with you.. I'm an industrial electrician who does a lot of work in panels/transformers and distribution cabinets... twisting off is best.. but sometimes u wanna just quickly nip and go.
Time over blood?
Not sure I can wrap my mind around purposely not being safe
@gerhardschemel3565 never had a deadline? If you're worried about somebody getting a little scratch inside of an energized panel you're worried about the wrong thing. Once that baby is energized nobody is gonna be back in it until it needs serviced
Nice.
I know im not the only one who heard the sound of a gun cocking.
so cool
I have to copy your style for some my vedio 😂 good job 👏
Wow wow wow there, I didn't see any ferrules? Not even on the ones going in the wago
Normally Open wires are just broken wires tho
Nice .. but with all the fancy gadgets .. why leave the razor-edge on the ty-wraps?
Did you fit the switches to the shelf or am I being slow… If so, why not mount to the top?
Nah 😂 im good, dawg!
with no wires..... proceeds to cut wires and wire everything up
wow.. there are uses for those types of switches... but in this case it is totally pointless in my opinion.. (automation cabinet builder)
exactly the same kind of lamp can come with a built in switch.. a switch on a short cable to mount next to it.. or just motion detector built in the lamp it self..
Hi Rick, what is the punch tool you are using to make a starter hole in the sheet metal? And then you have another tool that punches through? (Gold one). Great video!
He's using a long-nib marker pen (drill-hole marker pen) to mark the locations, then an automatic centre punch (the gold one) to create a divot in the metal to stop the drill bit wandering. No through-hole is created in the metal until he starts drilling.
so many wires already being put in plus the destructive fixing to the cabinet might aswell just sling in some extra sticky pads and save money and hassle
You guys got a link for that punch?
Lol hole punch
I wonder how long it will last.
Or you could of just used a fitting with built in PIR
I've used loads. I think it's 10,000 presses they say. Which on and off twice a day is alot
@MattySmev 200,000 according to the spec sheet
@michaelraab5669 even better. Knew it was something ridiculous
Wish they had an earth terminal
Sticky pads .
Centre punch
That pen thingy
Not satisfying without the ferrules.😂
Nice idea but the receiver is £20 and the switch is £13, A basic wired switch is £3.50 off Amazon. Way too expensive unfortunately.
This is British electric!
So many wires for wireless!
Don't they have magnetic switches where you live?
I would have tapped it.
So the magic is using batteries instead? Or is it powered by magic? Ok kinetic energy
The old house I live in has non wireless versions of these in every closet of the house. Best thing ever
Who uses straight slot screws anymore???
those flat head screws are horrendous!
wireless light
sweet
Do you have to put batteries in the master switches?
No.
I can see this being used where the switch is far away from the light, but it is 3 inches away from the light in this cabinet. That doesn't make any sense.
It’s just to demonstrate it! 🤦🏻♂️
Schon mal was von LED Band gehört
More wires than normal
How many at the switch though? Which is the point… 🤦🏻♂️
I’ll buy wago’s when they’ll be a lot cheaper cuz Holly hell there’s no way I’m buying that rn
I have been waiting for 10 years and it's getting more expensive😅
"NO wires"... I do not think those words mean what you think they mean.
This light switch that has no wires. There bseems to be wires involved. Also why did you have to replace the light with the same one?
Not at the switch though, are they? 🤦🏻♂️🤦🏻♂️🤦🏻♂️
How come Quinetic don’t have built in CPC/earth terminals? Definition of laziness and cutting corners
Где обжим проводов?
Why waste money with the kinetic switches,etcetera, especially when the light, door contact and power supply is in the same enclosure
Just use a pir sensor
What if it’s not appropriate?
Что за маркер такой?
Я так понимаю обычный концевик уже не канает ?
Con todo respeto que desmadre armarlo😢
What a waster effort? A single small pir connected directly onto the light would do the same for less and with no addion hardware... just overthinking and overcomplicated that way.
Maybe a pir isn’t wanted? Many situations where this can be useful.
Get yourself checked
Solving the non existed problem
Solves many problems if you’re an actual electrician!
@@jameshansing5396 yeah if im an electrician i will make fortune and happy if someone need this kind of stuff since i can rip the owner off with lot of wire,gadget,and many other useless thing for this kind of stuff to work and i will do the most complicated wiring for the simplest job just to make much more profit out of the job..but im not an actual electrician so i hate motion sensor light because if you stay still long enough like watching t.v or working on desk the light will go off same goes with ceiling fan because your hand or feet is not registered as human or movement but cats,dog,even a drifting plastic bag can turn on motion light,ceiling fan also voice activated system is another sore thumb..and for this videos i can think a much easy way to install that light without all the complicated wiring..like fridge light or car center light as example..that have those little thingy that stick out when you open the door and the light on
No wires, no i.d. coding. Ive got some bike lights that run on these type of modular pcb. Your switch will turn random things on and off as well as your neighbours. My front light (non radio just on and off) switches my rear indicators on and off as well as the rear light (those two are remote operated). Cheap modular out of china is no good atm. Best avoided.
I see wires
Huh?
switch wire white not identified
It’s the receiver, so essentially an antenna…. 😂🤦🏻♂️
I see some wires
Not at switches though are they? Which is the point! 🤦🏻♂️
3M company
Just get Philips Hue
Id go with tplink, does the same job but you can get 4 switches or bulbs for $20. Avoid the pre -2023 motorized cameras though they're buggy and lose position. New ones are ok.
@@luminousfractal420 possibly true, but I was all ready in deep before tplink came along.
Концы не обжаты олень
Lot of fuss about nothing
This product blows
what a waste of time
Can be very useful
what brand deep hole pen is that?