It seemed crass to comment at the time so I let it sink in a few days.. So very sorry about J . His humbucker and wah signifying the onset of spectacular songs remains engrained in our collective memories. I wasn't close and didn t have the privilege that you had to be a true friend to the band . But have loved their unique talent since you brought it to us through your channel.. I am gutted for you and mourn the loss of a fellow musician ..there's a joy in creating art . Something that previously didn t exist. My eyes are not dry , I Can't say why . I never met this Inspiring Guy. The music lives It never ends , To share to cherish This Feast of Friends. ☮❤
Great demonstration of patience and detail. It is very relaxing to watch a proper rebuild taking the time to do everything as it should be, right down to polishing those rusty retaining springs and pins. Well done, Happy New Year!
I have a 1995 Triumph Tiger with a similar set up. 25 years on, the brakes have been rebuilt about 8 times ~ every 3 years as part of a deep maintenance program. Some ideas I developed to add to yours; I use ultrasonic cleaning & selectively mask off the parts you painted then later machine sanded (no loss of metal that way). Also a good time to consider a colour change. You mentioned using a suitable sized socket to push down a rubber dust seal. I also use it at the wire wheel for loose holding bolt/screw heads, followed up by a rattle can clear coat finish. Uneven parts at the wire wheel are always done with gloves or holding with Vise Grip locking pliers for safety & not losing them as they might pull out of your hands. Doing it often (before they start looking like 12m:42s on this video) helps to prevent that corrosion. My pistons are still within spec at 133,xxx, km & 25 years (over 50% on gravel or through mud). I usually only have to change the O-rings in the callipers, with other rubber parts every 6 years or so when inspected often enough. Same goes for hydraulic clutches on those machines so equipped
Very sorry to hear about you m8 Jason. It's great you remember him in this way. So, I got essentially same bike (Thunderbird Sport 900 - 2004). Same rear brake system. Brand new brake disc. Rebuilt the caliper, new pistons, seals, nipple. new hose (ss braid) etc. Completely cleaned (ultrasonic) housing. Went back together even better than yours. Rebuilt master cylinder, new seals, piston, spring etc.... again went back together easy. New brake pads - brand new. Bleed system, pump brakes, get grip. Take out for a burp - apply rear brake - slight slowdown. Take pads out, scuff with a little emery cloth (sandpaper) - lightly. Clean with brake cleaner. Take out second time - no difference. Even an elephant can't lock up back wheel.... NOT an air lock issue, that I can guarantee. Buy BRAND NEW master cylinder. Take out. Same elephant can't lock up wheel. Rear brake so slight, weak, pathetic. I compare to my Honda CB600F/CB900F which have great rear braking. What's wrong with the Triumph rear brake??? Essentially new brakes/fluid. Thank, by the way and Happy New Year. Best
Thank you kindly Sir, we really appreciate that, treasure those you love, for we never know how long they will be in our lives.. have a great weekend and keep safe.. Del.
Sorry to hear about your friend mate, 2020 has given us all a kick in the nutsack one after another, my deepest condolences to his family and all his mates in the band, i hope everyone has a better year in 2021, smashing vid Del, all my best wishes to you and the Lady P for 2021.
Thank you Mike, it is a sad loss, and so sudden too, treasure all the close people around you, and value every day with the ones you love.. Take care and keep safe sir.. D&Pxx
Absolutely great job on the rear brake rebuild, the caliper with the new braided hose looks amazing Del. Some great music playing from Feast of Freinds while we all sit back and watch you do your craft. RIP Jason Simmons, our thoughts are with all his friends and family, God bless.
Thank you so much for your kind tribute Graham, Jason's family and friends will greatly appreciate that. Take care and keep safe, and thank you for your kind support.. D&Pxx
Just got done with the same rebuild using the same parts you sourced and your video for reference. Clockwork. Like new after 22 years. Bit of weeping where the hose connects to the reservoir so that gets replaced. Other than that, just perfect.
That's wonderful news Edward, am glad you got it fixed, they're a really simple straightforward caliper and so easy to restore... the bike looks great now!
Another lovely video. Great to see the high quality of workmanship in each and every video on your channel. Sorry about your friend. May he rest in peace.
Thank you kindly Sir, with the year we've all had, it's been an honour to be able to continue the videos and give some light entertainment from the day-to-day stresses.
Great video as ever, after my recent query about brake fluid on fresh tough paint, thanks for talking about that at the end, your a star... I'm also right in the middle of refurbing my clutch hydraulics on my old hinkley, so I look forward to your next vid.
Hi Andrew, you're most welcome mate, im glad the videos can help.. ill be fishing the old clutch hose out of mine shortly, it seems they fitted it before they fitted the engine..lol. ho hum, it's all good fun aye.
Wish when I done mine they would come out like this 😂. Excellent job. In your copper grease pot have a little arts paint brush so you don’t have to use a screw driver.
well done 👍 the level of detail is outstanding! cant wait for the next one !!! ive been listening to feast of friends lately while working on my motorcycle as well ! great music
Hey buddy, yes indeed, very cool music by very talented people, such a sad loss to the band, to the world of music and most of all, to his family... it makes us realise that we should value every day and treasure every special person in our lives.
Thanks Del, sorry to hear about your friend whose music has accompanied you through many videos. God bless you and Penny this year. Looking forward to what you have for us on the channel.
Hey Abouzar, Happy New Year my friend, and wonderful to hear from you as always... thank you so much for your wonderful support over the years, it's great to have your friendship and know that you are out there watching and enjoying! Take care and keep safe, and have a wonderful weekend, D&Px
Great to hear the feast of friends back on the videos, best music on the channel in my opinion. Sorry to see it was in tribute thoughts and condolences to the family and friends. Great job Del on restoring the bike keep up the good work, hope you and penny are keeping well.
Thank you for your kind words Rob, am sure the band would appreciate that, and we're really gllad you've enjoyed the music... we will use it again, from time to time, as it has become a defining theme to our Channel as you say... we're both well, hoping you're the same there.
Have you ever tried DIY zinc plating? For those little retaining clips, pins and springs. It would be satisfying to replated in the yellow zinc coating. Something I've always wanted to try for bits that I can't blue with heat and oil. This was a super satisfying video to watch, I love how methodic
I love to watch your videos mate, it has been a while and even when I am not a mechanic I feel I learn a lot from these. Hope you know that even after all this time, yoru videos are so helpful. Greetings from Mexico
Happy New Year, Del, and thanks a lot again for another fantastic video! Let 2021 be healthy, prosperous and enjoyable for you, your family and your friends!
Thank you Paul, wishing you the same Sir, hoping for a better year, which let's face it, won't be difficult.. the vaccine is here now and let's hope we can crest and get on the downside of this as soon as... thank you for your kind words on Jason, it's a sad loss... keep safe and well there Paul, all the best from us both, D&Px
Really nice result, Del, and have to say that I like this video style quite a lot! Great revisit to music from Feast of Friends....sorry for your loss of friend! Happy New Year!
Thank you Allen, it's the way of the future, we listen to feedback and it seems so many people appreciate just detailed, close up, fingertip demonstration, rather than waffle... an increasing amount of creators just stand and waffle these days, but I think you all prefer a visual demonstration, so we keep it to a minimum and are glad it's appreciated.... thank you for your kind words on Jason.
HNY, Del and Penny! (So sorry to hear about your mate Jason.) This bike is shaping up to be a better than new version! Lucky lad or lass who ends up with it after you! Stay safe- 🏍👍🏍
Thank you Gary, that's very kind, we picked the right donor bike, low mileage, so no significant engine wear, just externally neglected, and you're right, when it's done it should be a really nice bike for someone. Happy New Year, stay safe and well both, D&Px
My K1200 is getting a major service this winter. When I throttle off the whole bike seems to take a dive, especially at lower speeds. I put it down to the crappy fuelling they seem to suffer from. Until I’ve been removing the rear wheel for a new tyre. Bloody thing would hardly rotate, seems the calliper is seizing on its pins. So I’ll be following you with a total rebuilt, and will make a note, it ain’t always what you think ! (It’s also got the worst clutch I’ve ever ridden with !).
I feel a massive feeling of accomplishment when I just watch you doing rebuilds I can't imagine what you feel doing them you should be very pleased with how that came out and I'd like to say well done del you made that look so easy I'll be doing mine before summer and will be having this video to hand while I do as reference for sure hats off to you man 👍👍👍👍
hey Gav, good to hear from you mate, and thanks for the kind support, im glad the video inspires you too.. it is a great feeling of pride when you stand back from any job and enjoy the results.. Good luck with yours, it's always worth doing, brakes are always in the firing line for salt abd weather corrosion, so why not treat them right. Keep safe buddy, and enjoy your weekend. D&Pxx
I liked the socket trick on the calliper rubber mount, haven't seen that before, and I must of re built thousand's of those things in my time, good one. she's certainly developing a tidy rear end Del. Here's to The new year, Hope 21 is going to be better than 20 was.
Ive been looking forward to this one and it certainly didn’t disappoint Del. That calliper looks like new and miraculous what you’ve achieved there. Said it before....love this project. Kind regards.
Hey Beans, thansk so much fo your kind words, it's much appreciated, this bike is a journey and it will hopefully be very special at the end... we're glad to know you enjoy! Happy New Year mate.
Thanks Del, the video length was perfect too, i was cooking a New Years roast and the spuds were due on in 20 mins so was perfect timing 😂....best head over to Patreon soon as i reckon i could build a motorbike now. Happy new year and as always kind regards.
Lovely job. By the way, I am running Triumph 4pot calipers on the front of my zx9r. Great improvement over the original 6pots. Thanks for tutorials Del. Take care of yourself and the family mate. 👍🍻
Good Move Ian, i head thats a good upgrade like the Suzuki Bandit 'Nissin" 4 pots.. they may have 2 less pots.. but they're bigger and less prone to clog up and jam with dust and grime.. Good move mate
You're welcome Brother, it is the tiniest thing we could do, and we'll continue to do in future videos with the kind, and good grace, of wonderful Brothers like you... will message you privately, Take care and keep safe, D&Px
Masterful work and cinematography! I appreciate the fact that you're happy to learn new tips from your viewers. Also, I see that your heat treated spring clips stayed springy. 👍
Hey Harold, YT is a wonderful platform for sharing knowledge, and in this case as you can see, so is the comments box, many things I've learned have come from viewers, it's a great community!
Fun and informative vid as usual Del. I can't wait to "season" some bolts with the torch. Sorry about your friend. His music was and will always be a perfect addidion.
Good choice mate, Wemoto will make them to order and if you need any changes to the standard spec, such as longer or shorter, or different angled banjos, then just ask and they are happy to accomodate! Happy New Year!
You're so right Matt, we have been honoured to have been able to share within our videos the wonderful music of Feast of Friends, and never have we been so graciously honoured than when they took the time, trouble and effort to get together and record our very own personal theme tune, and not just one version of it, but 4, astonishing people indeed and genuine good souls all of them... JBird will be sorely missed.
Hi Tony, Happy new year to you and your family sir, and thank you for your awesome support as always, take care and have a great weekend.. keep in touch.. D&Pxx
You and Penny are the definition of meticulous perfection, from the rebuilds and creativity to the camera work, editing and soundtrack. Thank you Del for making these vids so inspiring, you two are simply getting better. Happy New Year you two... love from Oz!
Wow, thank you Paul, we are truly bowled over by your generous kind comments... we set our bar high and we are always working hard to keep pushing ahead and it's great to know it's appreciated and enjoyed. We hope life is bearable in Oz for you, this past year has been a challenge for so many, we vowed to keep the videos coming no matter what, so we are truly grateful for your kind support, wishing you a safe and healthy 2021, ride safe and keep well, all the very best, D&Px
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
![What's in the box?! 1890s Safe [Restoration]](/img/1.gif)
Sorry for the loss of your friend, his music is great. I ref your rebuild videos all the time to update my bike. Great stuff !!
It seemed crass to comment at the time so I let it sink in a few days..
So very sorry about J .
His humbucker and wah signifying the onset of spectacular songs remains engrained in our collective memories.
I wasn't close and didn t have the privilege that you had to be a true friend to the band . But have loved their unique talent since you brought it to us through your channel..
I am gutted for you and mourn the loss of a fellow musician ..there's a joy in creating art . Something that previously didn t exist.
My eyes are not dry ,
I Can't say why .
I never met this
Inspiring Guy.
The music lives
It never ends ,
To share to cherish
This Feast of Friends.
☮❤
Majestic words Brother.. Salut. !
Great demonstration of patience and detail. It is very relaxing to watch a proper rebuild taking the time to do everything as it should be, right down to polishing those rusty retaining springs and pins. Well done, Happy New Year!
Thank you Sir for your kind words, glad your appreciate what we do... keep safe and well in 2021, all the best from us both 👍
I have a 1995 Triumph Tiger with a similar set up. 25 years on, the brakes have been rebuilt about 8 times ~ every 3 years as part of a deep maintenance program. Some ideas I developed to add to yours;
I use ultrasonic cleaning & selectively mask off the parts you painted then later machine sanded (no loss of metal that way). Also a good time to consider a colour change.
You mentioned using a suitable sized socket to push down a rubber dust seal. I also use it at the wire wheel for loose holding bolt/screw heads, followed up by a rattle can clear coat finish. Uneven parts at the wire wheel are always done with gloves or holding with Vise Grip locking pliers for safety & not losing them as they might pull out of your hands.
Doing it often (before they start looking like 12m:42s on this video) helps to prevent that corrosion. My pistons are still within spec at 133,xxx, km & 25 years (over 50% on gravel or through mud). I usually only have to change the O-rings in the callipers, with other rubber parts every 6 years or so when inspected often enough.
Same goes for hydraulic clutches on those machines so equipped
Very sorry to hear about you m8 Jason. It's great you remember him in this way.
So, I got essentially same bike (Thunderbird Sport 900 - 2004). Same rear brake system. Brand new brake disc. Rebuilt the caliper, new pistons, seals, nipple. new hose (ss braid) etc. Completely cleaned (ultrasonic) housing. Went back together even better than yours. Rebuilt master cylinder, new seals, piston, spring etc.... again went back together easy. New brake pads - brand new.
Bleed system, pump brakes, get grip. Take out for a burp - apply rear brake - slight slowdown. Take pads out, scuff with a little emery cloth (sandpaper) - lightly. Clean with brake cleaner. Take out second time - no difference. Even an elephant can't lock up back wheel....
NOT an air lock issue, that I can guarantee.
Buy BRAND NEW master cylinder. Take out. Same elephant can't lock up wheel. Rear brake so slight, weak, pathetic.
I compare to my Honda CB600F/CB900F which have great rear braking.
What's wrong with the Triumph rear brake??? Essentially new brakes/fluid.
Thank, by the way and Happy New Year.
Best
Neat tip with the rubber boot and socket, "but you knew that didn't you" 😄
I actually didn't know that one, just hadn't thought of it.. every day's a school day aye.!
@@Moonfleet41 You're right. That's why I watch your channel. I'm always learning, and never want to stop. Keep videos coming 👍🏻
Sorry buddy to hear about your loss. Losing a friend is a tough thing. The triumph is coming along nicely.
Thank you kindly Sir, we really appreciate that, treasure those you love, for we never know how long they will be in our lives.. have a great weekend and keep safe.. Del.
So sorry to hear about your friend. Some great tracks there, love a bit of Feast of Friends
Thank you for your kind words Giles, it's always the most talented and generous people that we lose too soon.
Sorry to hear about your friend mate, 2020 has given us all a kick in the nutsack one after another, my deepest condolences to his family and all his mates in the band, i hope everyone has a better year in 2021, smashing vid Del, all my best wishes to you and the Lady P for 2021.
Thanks Glen, have replied to you on your FB message mate.
sorry for your loss my friend and thankyou for introducing me to there music .
Thank you Mike, it is a sad loss, and so sudden too, treasure all the close people around you, and value every day with the ones you love.. Take care and keep safe sir.. D&Pxx
I really enjoy your videos. Just enough chat to explain the job and then meticulous, well filmed video of the work at hand. Thank you.
Most welcome Steve, glad you enjoyed it.
Absolutely great job on the rear brake rebuild, the caliper with the new braided hose looks amazing Del. Some great music playing from Feast of Freinds while we all sit back and watch you do your craft. RIP Jason Simmons, our thoughts are with all his friends and family, God bless.
Thank you so much for your kind tribute Graham, Jason's family and friends will greatly appreciate that. Take care and keep safe, and thank you for your kind support.. D&Pxx
Looks absolutely brilliant!
Just got done with the same rebuild using the same parts you sourced and your video for reference. Clockwork. Like new after 22 years. Bit of weeping where the hose connects to the reservoir so that gets replaced. Other than that, just perfect.
That's wonderful news Edward, am glad you got it fixed, they're a really simple straightforward caliper and so easy to restore... the bike looks great now!
Been watching your videos for years !... Keep up the great work.. your attention to detail is second to none.
Thank you buddy, that's very kind, am glad you enjoy the videos!
Sorry for your loss 😔 God bless the family and friends 🙏
Sorry to hear about Jason. Always loved the music you put on by Feast of Friends. Hope the build continues to be excellent.
Thanks for your kind words there mate, Jason is greatly missed by his friends and family.
fantastic job on the rear calliper, Nice choice of music
No one can teach us like you...🌹🇮🇳🇮🇳🇮🇳🇮🇳🚩🚩🚩🚩🛕🛕🛕🛕👏👏👏👏👏👏👏👏👏👏👏👏
I could see green bits in the threads from the scotch brite that you used, a little compressed air will blow that stuff out.
Looks great... Awesome music. Always the good ones go too soon.
Condolences.. RIP.
Thank you so much sir, the band will appreciate those kind words..
Sorry for your loss. Like this music very much.
Thank you John, The band will really appreciate that.
Beautiful workmanship.
Another lovely video. Great to see the high quality of workmanship in each and every video on your channel.
Sorry about your friend. May he rest in peace.
Thank you so much my friend for those kind words... it's a sad loss to his family and also to the music world.
Happy New Year to you and your family.
Many thanks for all of your work through 2020. You've kept a lot of people safe and sane.
Thank you kindly Sir, with the year we've all had, it's been an honour to be able to continue the videos and give some light entertainment from the day-to-day stresses.
I’m in awe. It’s like watching a surgeon work! Fantastic job mate. I’m absolutely loving this build!
Thank you Patrick, really glad you're enjoying it, have a wonderful weekend.
Doesn't get much better than that , I'm really enjoying this build so much del 👍
Thanks buddy, that's very kind, and we're glad you're enjoying it!
Great video as ever, after my recent query about brake fluid on fresh tough paint, thanks for talking about that at the end, your a star... I'm also right in the middle of refurbing my clutch hydraulics on my old hinkley, so I look forward to your next vid.
Hi Andrew, you're most welcome mate, im glad the videos can help.. ill be fishing the old clutch hose out of mine shortly, it seems they fitted it before they fitted the engine..lol. ho hum, it's all good fun aye.
Thank you. Wish you well and come to America for Track Riding. You do excellent work and have the patience to teach us.
Al
Thank you very much, would love to, perhaps when this terrible virus is over we can make a plan! Ride safe mate.
@@Moonfleet41
Best wishes and its a plan. Hope to see you soon mate.
Al
Never get bored of watching these videos, always learning and gaining confidence to do my own maintainance, cheers Del
Glad to see the 7 Ps are still part of your arsenal. Condolences on the loss of your mate.
@@arc001 Yep.
Oh man!, amazing does not mechanic that is art. thank you for share.
Thank you very much!
Wish when I done mine they would come out like this 😂. Excellent job. In your copper grease pot have a little arts paint brush so you don’t have to use a screw driver.
You applied my suggestion 😍
Thank you a lot for mentioning it, I hope it helps a lot more people out :)
well done 👍 the level of detail is outstanding! cant wait for the next one !!! ive been listening to feast of friends lately while working on my motorcycle as well ! great music
Hey buddy, yes indeed, very cool music by very talented people, such a sad loss to the band, to the world of music and most of all, to his family... it makes us realise that we should value every day and treasure every special person in our lives.
Lovely job Del, I liked the before and after picture showing the flat metal spring in the caliper.
Sure thing buddy, just wanted to demonstrate a before and after, what a transformation aye! 👍
So satisfying to watch.
Better than new Del I would say a joy to watch 👍
Thank you Richard, glad you enjoy!
@Delboy'sGarage it's a bloody masterpiece 😍
Thank you Sebastian, you are too kind sir..
Thanks Del, sorry to hear about your friend whose music has accompanied you through many videos. God bless you and Penny this year. Looking forward to what you have for us on the channel.
Thank you for your kind support, glad to hear you enjoy the videos, wishing you a healthy and safe New Year.
Thanks for the video
Happy new year to you and Penny! It was great to start new year with this fantastic rebuild video!
Hey Abouzar, Happy New Year my friend, and wonderful to hear from you as always... thank you so much for your wonderful support over the years, it's great to have your friendship and know that you are out there watching and enjoying! Take care and keep safe, and have a wonderful weekend, D&Px
Awesomeness!!!🤩
Great to hear the feast of friends back on the videos, best music on the channel in my opinion. Sorry to see it was in tribute thoughts and condolences to the family and friends. Great job Del on restoring the bike keep up the good work, hope you and penny are keeping well.
Thank you for your kind words Rob, am sure the band would appreciate that, and we're really gllad you've enjoyed the music... we will use it again, from time to time, as it has become a defining theme to our Channel as you say... we're both well, hoping you're the same there.
Your videos are so much help to me and everyone great job as always delboy
That's great to hear Gary, appreciate your kind support, Happy New Year!
@@Moonfleet41 happy new year to delboy
Outstanding Sir. Great video can’t wait for the first ride out.
Damn that was theraputic to watch Del. Loved it!
man, what a lovely job.
Thank you kindly Sir!
Lovely assy process again. That paint looks like a factory finish.. Best wishes to you n Pen for 2021.. Happy New Year!!!
Thank you JG, appreciate your kind support and wishes, have a great safe and healthy 2021 yourself!
Brilliant vid
Amazing video production.
Much appreciate your kind words John!
Let your friend RIP, let's hope the rest of 2021 has no more sadness for you both.
Thank you for your kind words, we hope you're keeping safe and well there.
Happy new year , better than factory fit. Well done
Thanks Christopher, glad you enjoyed, have a safe 2021!
Have you ever tried DIY zinc plating? For those little retaining clips, pins and springs. It would be satisfying to replated in the yellow zinc coating. Something I've always wanted to try for bits that I can't blue with heat and oil.
This was a super satisfying video to watch, I love how methodic
I love to watch your videos mate, it has been a while and even when I am not a mechanic I feel I learn a lot from these.
Hope you know that even after all this time, yoru videos are so helpful.
Greetings from Mexico
Happy New Year! Looking forward the see this one finished !
Happy new year mate, hoping you're keeping safe and well there, D&Px
Happy New Year, Del, and thanks a lot again for another fantastic video! Let 2021 be healthy, prosperous and enjoyable for you, your family and your friends!
Thank you for your kind good wishes, we're really glad you enjoy the videos, and have a safe, prosperous and healthy new year yourself. D&Pxx
Love your work. Happy new year to both .
Happy new year to you too Ian!
Top Job Del best wishes for the New Year and I'm looking forward to your next videos.
Thank you very much, Happy New Year!
Nice.. bikes lookin real good..
Thanks 👍
Happy New Year Del! All the best for the new year to you and Penny!
Same to you mate, keep safe and well there!
Awesome Job Looks fantastic. HAPPY 2021 TO PENNY &YOU DEL RIDE SAFELY & HAVE A GREAT, WONDERFUL, HEALTHY YEAR 😀 😊
Thank you Paul, wishing you the same Sir, hoping for a better year, which let's face it, won't be difficult.. the vaccine is here now and let's hope we can crest and get on the downside of this as soon as... thank you for your kind words on Jason, it's a sad loss... keep safe and well there Paul, all the best from us both, D&Px
That does look top class! 😎
Happy new year to you both!
Same to you Paul!
Great job!
Really nice result, Del, and have to say that I like this video style quite a lot! Great revisit to music from Feast of Friends....sorry for your loss of friend! Happy New Year!
Thank you Allen, it's the way of the future, we listen to feedback and it seems so many people appreciate just detailed, close up, fingertip demonstration, rather than waffle... an increasing amount of creators just stand and waffle these days, but I think you all prefer a visual demonstration, so we keep it to a minimum and are glad it's appreciated.... thank you for your kind words on Jason.
Absolutely brilliant video again. Stand up and take a bow my friend 👌🏼 10/10
Glad you enjoyed it Dan, really appreciate your kind support.
@@Moonfleet41 I've done exactly the same on the CBR thankyou for the knowledge 👌🏼
Pięknie , bardzo subtelnie pokazane .Pozdrawiam
Dziękujemy Tomaszu, Szczęśliwego Nowego Roku!
High quality job on the rear brake caliper /master cylinder Delboy .all the best Tony
HNY, Del and Penny! (So sorry to hear about your mate Jason.)
This bike is shaping up to be a better than new version! Lucky lad or lass who ends up with it after you! Stay safe-
🏍👍🏍
Thank you Gary, that's very kind, we picked the right donor bike, low mileage, so no significant engine wear, just externally neglected, and you're right, when it's done it should be a really nice bike for someone. Happy New Year, stay safe and well both, D&Px
@@Moonfleet41 😎
Spot on brake job ⚙️🔩🔧👍 sorry to hear about your friend RIP.
Best Wishes for 2021. Keep up the good work Del
Same to you Baz, Happy New Year!
My K1200 is getting a major service this winter. When I throttle off the whole bike seems to take a dive, especially at lower speeds. I put it down to the crappy fuelling they seem to suffer from. Until I’ve been removing the rear wheel for a new tyre. Bloody thing would hardly rotate, seems the calliper is seizing on its pins. So I’ll be following you with a total rebuilt, and will make a note, it ain’t always what you think ! (It’s also got the worst clutch I’ve ever ridden with !).
I feel a massive feeling of accomplishment when I just watch you doing rebuilds I can't imagine what you feel doing them you should be very pleased with how that came out and I'd like to say well done del you made that look so easy I'll be doing mine before summer and will be having this video to hand while I do as reference for sure hats off to you man 👍👍👍👍
hey Gav, good to hear from you mate, and thanks for the kind support, im glad the video inspires you too.. it is a great feeling of pride when you stand back from any job and enjoy the results.. Good luck with yours, it's always worth doing, brakes are always in the firing line for salt abd weather corrosion, so why not treat them right. Keep safe buddy, and enjoy your weekend. D&Pxx
I liked the socket trick on the calliper rubber mount, haven't seen that before, and I must of re built thousand's of those things in my time, good one. she's certainly developing a tidy rear end Del. Here's to The new year, Hope 21 is going to be better than 20 was.
Ive been looking forward to this one and it certainly didn’t disappoint Del. That calliper looks like new and miraculous what you’ve achieved there. Said it before....love this project. Kind regards.
Hey Beans, thansk so much fo your kind words, it's much appreciated, this bike is a journey and it will hopefully be very special at the end... we're glad to know you enjoy! Happy New Year mate.
Thanks Del, the video length was perfect too, i was cooking a New Years roast and the spuds were due on in 20 mins so was perfect timing 😂....best head over to Patreon soon as i reckon i could build a motorbike now. Happy new year and as always kind regards.
Great job del. the caliper looks fantastic. that tuff black paint is awsome stuff..
As usually, great video!
That caliper looked just like the wife on a night out...scrubbed up well,Happy New Year to you and Penny hope it's a good 1
Love the comment mate, let's hope Mrs Bikerdad sees it, or you are sooo done for! Happy New Year, keep safe and well!
@@Moonfleet41 hope she doesn't ey!!!
@@Moonfleet41 hope she doesn't ey!!!
Lovely job. By the way, I am running Triumph 4pot calipers on the front of my zx9r. Great improvement over the original 6pots.
Thanks for tutorials Del.
Take care of yourself and the family mate. 👍🍻
Good Move Ian, i head thats a good upgrade like the Suzuki Bandit 'Nissin" 4 pots.. they may have 2 less pots.. but they're bigger and less prone to clog up and jam with dust and grime.. Good move mate
J bird would have loved this. Thanks guys.
You're welcome Brother, it is the tiniest thing we could do, and we'll continue to do in future videos with the kind, and good grace, of wonderful Brothers like you... will message you privately, Take care and keep safe, D&Px
Masterful work and cinematography!
I appreciate the fact that you're happy to learn new tips from your viewers. Also, I see that your heat treated spring clips stayed springy. 👍
Hey Harold, YT is a wonderful platform for sharing knowledge, and in this case as you can see, so is the comments box, many things I've learned have come from viewers, it's a great community!
Great work Del and Penny. Loving this series.
Your music from feast of friends reminds me alot of Alice and chains. Good stuff
Thanks David, we are always honoured to showcase talented musicians, their music is a gift for all.
Fun and informative vid as usual Del. I can't wait to "season" some bolts with the torch. Sorry about your friend. His music was and will always be a perfect addidion.
Thank you for those kind words Jeff, he was an inspirational musician, and sadly missed by his close friends and family..
Happy new year guys hope next year is even better for you guys. Nice meticulous work Del
Thanks Andy, despite all the troubles of 2020 we vowed to keep the videos going and it's great to know it's been appreciated... Happy New Year mate.
Happy new year Del , nice paintwork...looks nice and factory new.
Thanks mate, and have a great 2021 👍
Happy New Year!!
Same to you mate!
That was a very relaxing video, done very well!! Unreal 👍
Thank you very much, glad you enjoyed it!
Well that was enjoyable and almost therapeutic!!
Love watching this gives me confidence to try things myself, Hel lines next for me. Happy new year guys.
Good choice mate, Wemoto will make them to order and if you need any changes to the standard spec, such as longer or shorter, or different angled banjos, then just ask and they are happy to accomodate! Happy New Year!
Happy New Year Del and Penny. It looks better than brand new. Sorry to hear about Jason. Feast of Friends and Delboy's Garage are a great match.
You're so right Matt, we have been honoured to have been able to share within our videos the wonderful music of Feast of Friends, and never have we been so graciously honoured than when they took the time, trouble and effort to get together and record our very own personal theme tune, and not just one version of it, but 4, astonishing people indeed and genuine good souls all of them... JBird will be sorely missed.
Sad loss good tunes keep your chin up
Fantastic job mate. Happy new year
Thanks, you too John!
Happy new year Del Penny , great video 👍
Hi Tony, Happy new year to you and your family sir, and thank you for your awesome support as always, take care and have a great weekend.. keep in touch.. D&Pxx
Sorry to hear about Jason RIP
Thank you for those kind words.
It's already second day of new year , but anyway .... Happy New Year , keep good and healthy, thanks for videos and .. waiting for new ones . :)
Sorry to hear about your friend's passing. But Happy New Year, Del and Penny. Great video, content and production both!
Thank you John, happy new year to you too, let's hope we can get past this crisis and onto a happier year for 21.. Take care and keep safe, D&Pxx
You and Penny are the definition of meticulous perfection, from the rebuilds and creativity to the camera work, editing and soundtrack. Thank you Del for making these vids so inspiring, you two are simply getting better. Happy New Year you two... love from Oz!
Wow, thank you Paul, we are truly bowled over by your generous kind comments... we set our bar high and we are always working hard to keep pushing ahead and it's great to know it's appreciated and enjoyed. We hope life is bearable in Oz for you, this past year has been a challenge for so many, we vowed to keep the videos coming no matter what, so we are truly grateful for your kind support, wishing you a safe and healthy 2021, ride safe and keep well, all the very best, D&Px
Nice and socket great idea👍👍👌.🏍🏍🏍🏍🍺🍺🍺🍺🍺.
Happy new year del,everyone,,hope this year is better,,🍻🍻🍻🍻
Thanks mate, let's hope so, looks like a few bumpy months ahead, then perhaps we can turn the corner... stay safe there!