If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Ok, I noticed that you had screwed in some screws counter clockwise. So, at first, I figured it was a thing where zmetica its clockwise, then overseas counterclockwise. Then I noticed, that the numbers on your Work pad were also reversed. Now that I have seen it. I can't unsee it. Still an awesome video though. Thinking of starting this build and happy belated 🎂 🎁 🎈
20:30 this spring i had an issue with mine, when closed inside i couldnt rotate the shoulder because there was "too much spring" and when you press it, some of it would catch on the outside edge of the groove, when compressed when turning the shoulder joint, it would compress but there was so much spring it wouldnt compress enough so that the teeth of the mechanism would release enough so it wouldnt rotate, so i had to cut the spring a bit shorter for it to work. Also, its good to get some sort of contact grease in there on the spring where it fits into the grooves, just a little tip there. prob wont make much difference, but can stop the spring "coiling up" and expanding inside when you turn it or making little metal dust in there from moving it a lot.
Absolutely loving your videos Wayne - your tutorials are first rate and you have such a great pesonality. At first I thought these part works were too expensive, but, watching you buld them shows how much work has gone into designing and manufacturing these builds. Very tempted to buy the T-800 from Agora. One thought. At some stage of the build, you will have the T-800 arm that was part of Terminator Two's plot line.
Thought: If you need to hold down a spring / part could a clamp apply enough pressure? That way you'd have a free hand. Useful also if like me only one of your hands has proper strength and dexterity.
@@WorldofWayneUK It is fine as a mechanic and some one that builds a lot of stuff just noticed but at the same point some stuff, is put in reverse thread, nice build, good job.
I am doing this correctly as far as I can tell. Two questions: first off, the top part will not move at all, and is it necessary for it to move? I have taken the back off so many times I am going to occupational therapy tomorrow for my thumb.
@@WorldofWayneUK you will have to make a cool diorama for them. Be so cool 9f you could some how put synthetic skin over one and then have it look like Arnie with battle damaged clothes and skin showing bits of the endo skeleton
eagle eyes here was confused that you was screwing in the screws anti cloickwise, then i noticed the numbers on the mat were backwards. ahhhhhhhhh i understand now lol.
I've been building the terminator and I'm on pack 3 . I've been having trouble trying to get the shoulders to move. I built everything correctly and all the pieces fit together perfectly. But for some reason I can't get them to push in and turn. Does anybody know how I can fix them?
@@matthewsnathan2375 It sounds like the spring is pinched. It should be pushing back against the joint quite a lot. I think it would be best to fully take it apart and see what is going on.
I have many #wayneisms I didn't even know #woggly was not a word until Mrs World of Wayne told me. I was always asked as kid if I had a "woggly" tooth I guess I heard "wobbley" as that. Still I am happy to do my bit by adding to the English Lexicon lol
Hello Wayne.... love your channel love your world....BUT! why do you have always have the glue on the opposite side of your work far away? frustrating to wach...anyways i'm building the Bismarck in Australia, only at part 42 here, way behind.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Happy birthday Wayne
@@terrymartin9525 thank you
Ok, I noticed that you had screwed in some screws counter clockwise. So, at first, I figured it was a thing where zmetica its clockwise, then overseas counterclockwise. Then I noticed, that the numbers on your Work pad were also reversed. Now that I have seen it. I can't unsee it. Still an awesome video though. Thinking of starting this build and happy belated 🎂 🎁 🎈
@@keithmuset6510 yep. No idea why that happened
@@WorldofWayneUK don't worry bro I still love ya. When I need assistance with my builds, you are always my first choice.
20:30 this spring i had an issue with mine, when closed inside i couldnt rotate the shoulder because there was "too much spring" and when you press it, some of it would catch on the outside edge of the groove, when compressed when turning the shoulder joint, it would compress but there was so much spring it wouldnt compress enough so that the teeth of the mechanism would release enough so it wouldnt rotate, so i had to cut the spring a bit shorter for it to work.
Also, its good to get some sort of contact grease in there on the spring where it fits into the grooves, just a little tip there. prob wont make much difference, but can stop the spring "coiling up" and expanding inside when you turn it or making little metal dust in there from moving it a lot.
Absolutely loving your videos Wayne - your tutorials are first rate and you have such a great pesonality. At first I thought these part works were too expensive, but, watching you buld them shows how much work has gone into designing and manufacturing these builds. Very tempted to buy the T-800 from Agora.
One thought. At some stage of the build, you will have the T-800 arm that was part of Terminator Two's plot line.
Loving the build as all ways.
Stay safe all.
Happy birthday Wayne, the builds are looking awesome. Keep up the good work.
Thought: If you need to hold down a spring / part could a clamp apply enough pressure? That way you'd have a free hand. Useful also if like me only one of your hands has proper strength and dexterity.
Hi wayne I'm still around just been very sick so if i dont comment dont worry I'm still watching just got a lot of catchup 👍🏻👍🏻👍🏻
Nice video. When you secure the parts with screws, are you tightening anti-clockwise or is the video mirrored?
The video was mirrored. I had a problem with my editing software. I really need to redo this.
Hello Wayne, great video mate, I hope you have a happy birthday, Lee.
Oh...new subscriber and first comment. yay for me. But since I'm here, love your content, keep it up, Wayne!
Thanks for the support TK316. :D
Happy birthday mate! 🍻
Happy birthday Wayne hope all is well
Quick Question are the screws reverse thread, or it it the camera, showing it in reverse
.
It was the camera. I really need to.fix this video
@@WorldofWayneUK It is fine as a mechanic and some one that builds a lot of stuff just noticed but at the same point some stuff, is put in reverse thread, nice build, good job.
I am doing this correctly as far as I can tell. Two questions: first off, the top part will not move at all, and is it necessary for it to move? I have taken the back off so many times I am going to occupational therapy tomorrow for my thumb.
Nope should be perfect
Hey Wayne whatever happened to the big d'agostini Terminator are you still building at
Yep
why are you turning the screwdriver counterclockwise?
The video had flipped for some reason. I need to re edit this one
Half the packs seem to be missing, what happened?
I'm confused. We are on the last pack now
Happy Birthday Wayne.
What made you want to build this one when your already building it from Hacette? Are you going to keep both?
Yep. I like the idea of them coming in packs rather then individual. It also helps peeps who are just starting this build.
@@WorldofWayneUK you will have to make a cool diorama for them. Be so cool 9f you could some how put synthetic skin over one and then have it look like Arnie with battle damaged clothes and skin showing bits of the endo skeleton
Hi, is there any reason why one of your cameras is showing a reverse image ? I mean, when you switch, your right hand becomes the left one !
No idea it was mentioned earlier. I have checked my equipment and that's fine. I suspect Adobe Premiere did something during the render
Yeah, I noticed he was screwing it in backwards as well.
anyone knows in which issue is the last piece of the
head??????
I think its the very last one
@@WorldofWayneUK thanks bro
Just like that five billion times! You need named your channel "Just like that"
The Tommy Cooper Appreciation Society
unfortunately its getting on my nerves...
Is it plastic or metal and what glue are you using? Thanks
Its about 50% metal 50% plastic. I'm just using an ordinary superglue although thiw one dries clear
eagle eyes here was confused that you was screwing in the screws anti cloickwise, then i noticed the numbers on the mat were backwards. ahhhhhhhhh i understand now lol.
No idea why my side camera was flipped. It's never done that before lol
Wayne, are you still doing the Hachette version? I've seen all this before....
Yep
World of Wayne... Would you say so far that the quality is worth the price? I am really close to buying this.
Definitely. I am doing a showcase tomorrow on the prototype so you can see for yourself.
I've been building the terminator and I'm on pack 3 . I've been having trouble trying to get the shoulders to move. I built everything correctly and all the pieces fit together perfectly. But for some reason I can't get them to push in and turn. Does anybody know how I can fix them?
Thats weird. Try loosening the screw a tad so that the ratchet sections aren't so tight together
I tried loosening the 3 screws. But for some reason I can barely push it in and it doesn't turn.
@@matthewsnathan2375 It sounds like the spring is pinched. It should be pushing back against the joint quite a lot. I think it would be best to fully take it apart and see what is going on.
I took it apart and it is the spring. The spring doesn't stay straight when it is pushed together and it causes the parts to not work right.
Do the shoulders only turn in one direction?
Hi Wayne is there any difference between the two terminator builds ?
Great videos love the welcome to my cave section.
Keep up the good work.
Dave
Nope they are the same
Happy birthday Wayne!! Don't forget the Kracken today. CHEERS!! 🥃🥃
No plasma rifle yet Wayne? Happy birthday
Not till.late summer
Great vid enjoy your weekend 🇺🇸🇺🇸🎂🎂🙏🙏🍻🍻👍👍💞💞
Thought I was going bozz eyed.....then noticed one camera in reverse ...............or I could be drunk
Is it $1300 per project?
Yep
Hay
Dèjavous, shiny undead dude two gives you something to do.
Heh that rhymes.
Be well Wayne, stay entertaining buddy.
Is it just me or was he turning the screwdriver counterclockwise
The video had mirrored for some reason
"Flushly" 🤔? Huummm? Ild say thats a new word for the next dictionary. neither me or my phone knew it. But makes sense i suppose. LoL
I have many #wayneisms I didn't even know #woggly was not a word until Mrs World of Wayne told me. I was always asked as kid if I had a "woggly" tooth I guess I heard "wobbley" as that. Still I am happy to do my bit by adding to the English Lexicon lol
Hello Wayne.... love your channel love your world....BUT! why do you have always have the glue on the opposite side of your work far away? frustrating to wach...anyways i'm building the Bismarck in Australia, only at part 42 here, way behind.
I promise I will move it lol
@@WorldofWayneUK Ok.... i can sleep tonight lol.