Remember to SUBSCRIBE to see more videos, support the channel by sharing with friends and COMMENT about your favorite content for Kid Toy Tv to do much more video for you. THANK ALL OF YOU SO MUCH.
i have a huina 1550. but the receiver is broken. if you just change the receiver without changing the remote, can it turn on or connect the old remote to the new receiver?
I did the mod to mine! The video is located at: ruclips.net/video/JPVL4spbCkU/видео.html While I had it all open I reassign the arms to a more logic connection to the joysticks. Only one motor had a capacitor across its connections, very bad thing to leave out. When the field of the windings of the motor collapses it induces current back in and can burn out the controller electronics. Now all motors have a capacitor to protect it. Also, all wiring is inside the arms, and I put long enough runs so nothing is stressed. Those actuators are so strong that I added another pound of fishing weights on the opposite end of the machine. Now it stays level and does NOT tip in any direction. So far I have been able to lift 10 pounds of fishing weights! This machine is so powerful not that I could actually trench a water pipe in my yard, it would just take awhile, but can be done! I have a logger and truck crane that I will be doing the mod on also! My excavator is a lot different that yours on the inside, but no problem for me to mod, I'm a retired electronics instructor/engineer and this is childs play for me to mod. However, I sure wouldn't recommend to someone who doesn't know how to solder, and have enough brain power to figure things out. Before the mod I couldn't dig wet sand, now I can, as well as, dig very dry and hard dirt!!!
sorry about that! its was one of my old video i just start making videos when my channel just started! i made the video so bad! should have done better! well you can contact me on facebook to help you build! thankyou for visiting my channel
The video is very good. I bought a servo and a board soon I will install it on it
Remember to SUBSCRIBE to see more videos, support the channel by sharing with friends and COMMENT about your favorite content for Kid Toy Tv to do much more video for you. THANK ALL OF YOU SO MUCH.
Mantap bang keren 👍👍🙏
Wiring it back up how did you do it
Good 👍
How much stronger is it actually ? Iam looking to install them into my 1592
Nice
nice movie.
did maximum lift force increase?
how much weight can it handle now?
Hello, is there a better battery pack for this toy? One that last longer or gets a bigger output? Thank you
i have a huina 1550. but the receiver is broken. if you just change the receiver without changing the remote, can it turn on or connect the old remote to the new receiver?
You didnt show how to connect the wires which wires o b the excavator go to which servo
Hi there! Great video, just one question... How did the wiring go? Was it easy to do?
yes! its realy easy
where are the wires connected to the motherboard and what battery pack is that?
How do I connect cable servos ?? Please answer
I’ve search for several videos and nobody’s shows how to reconnect the wires it really disappointing
Bắn vít xuyên servo không sợ nó hỏng bánh răng servo hả ah
ngay giũa servos có khoãn tróng lớn lám !
Đục xuyên ko sao hả ah
Esta super el vídeo por favor modificada una volqueta
Can I buy one of your excavator please ?
Your link is incomplete, I tried it got a 404 message, might want to finish the link so it works correctly.
I did the mod to mine! The video is located at: ruclips.net/video/JPVL4spbCkU/видео.html While I had it all open I reassign the arms to a more logic connection to the joysticks. Only one motor had a capacitor across its connections, very bad thing to leave out. When the field of the windings of the motor collapses it induces current back in and can burn out the controller electronics. Now all motors have a capacitor to protect it. Also, all wiring is inside the arms, and I put long enough runs so nothing is stressed. Those actuators are so strong that I added another pound of fishing weights on the opposite end of the machine. Now it stays level and does NOT tip in any direction. So far I have been able to lift 10 pounds of fishing weights! This machine is so powerful not that I could actually trench a water pipe in my yard, it would just take awhile, but can be done! I have a logger and truck crane that I will be doing the mod on also! My excavator is a lot different that yours on the inside, but no problem for me to mod, I'm a retired electronics instructor/engineer and this is childs play for me to mod. However, I sure wouldn't recommend to someone who doesn't know how to solder, and have enough brain power to figure things out. Before the mod I couldn't dig wet sand, now I can, as well as, dig very dry and hard dirt!!!
Oya motar vargaya mokadda
Were did you get the servo actuator upgrade kit??????.
link on description! thankyou for visiting my channel!
0la como é que eu faço para montar tracção a traz maquina huina 1550
Lâu rồi ko gặp anh
Mua he ! Nen bân qua
In the sand break all
ভাই এগুলো দাম কত
Your hands hid most of your work couldn't see exactly what to do
sorry about that! its was one of my old video i just start making videos when my channel just started! i made the video so bad! should have done better! well you can contact me on facebook to help you build! thankyou for visiting my channel