I build a machine that cuts ANY shape
HTML-код
- Опубликовано: 7 сен 2021
- Hi, I know it's been awhile since i've posted last. but I've been busy, plus this project took a lot of research and fabrication. So the table has 3 axis, x, y and z. there are two stepper motors that run the x axis, and one for both y and z. I'm using an Arduino mega with GRBL which is an opensource CNC program that is compatible with all kinds of homemade machines. I am also using universal G-Code sender to send my designs as code, to the Arduino. I glossed over many parts of the project in the video, so if you have questions be sure to ask.
Here is some of the purchased equipment I used for this build:
Emergency stop: www.amazon.com/dp/B07R8PTTDX?...
End Mills: www.amazon.com/dp/B08CD99PWL?...
PWM to Voltage Converter: www.amazon.com/dp/B07BDK8QDG?...
Cable Wire Carrier: www.amazon.com/dp/B07QXJSS9V?...
Terminal block for Arduino Mega: www.amazon.com/dp/B07H9TJCWN?...
Connectors: www.amazon.com/dp/B0829Y7TGS?...
Elegoo Mega (Arduino Clone): www.amazon.com/dp/B01H4ZLZLQ?...
5mm to 8mm coupler: www.amazon.com/dp/B07P82D36N?...
Brushless DC Spindle Kit: www.amazon.com/dp/B083XQ9NF1?...
Aluminum Belt Pulley's: www.amazon.com/dp/B0747QJGYT?...
Linear Rails: www.amazon.com/dp/B08BRBRTJT?...
Stepper Motor CNC Kit ( I did not use the CNC board Provided): www.amazon.com/gp/product/B07... 
Авто/Мото
I'm sure I glossed over some things so feel free to ask me anything!
do you have schematics on how to connect the external stepper drivers. and a pinout for the arduino mega (im assuming a 2560) i purchsed a different kit and im having issues cant get my cnc up and running. cheers
@@MrJackbilly Sorry for the late reply. I think I used a schematic I found on google using the mega. Another way to find the pin out is in the source code of grbl. for the mega, you'll find that in the cpu_map_atmega2560.h file. good luck!
Hope your good miss your video
I totally dig all your projects. there always worth the wait.
Nice work Oliver! Really appreciate that you took the time to make this video 👍
A+ job there. It turned out awesome!
Excellent job! I'm planning on doing the same. The projects are limitless. Cheers from 🇨🇦
Oliver there isn't anything that's going to stand in your way is there. What's the end game? Bike components? You're like a mad scientist bro.
Hey Oliver 👋, have missed your videos cause I enjoy them all, hope all of your family is doing good 👍❤ . Keep'em coming and as always "Howdy from Texas "!!
Excellent video. Looking forward to future projects.
My favorite channel hand down. 💯👊
The best part was seeing how happy that fish made you lol. I can't wait to get my machine finished
You are a talented guy. Thanks for the video and God bless.
you know what you can do for your next build. you should use the pedals to start the engine. keep up the good work man.
Dude. This is awesome. Genius.
Hey what happened to some new videos??? I loved all your projects
Well done mate fantastic project very talented
Thank you Oliver. I have missed you. I hope you are well. You look a bit more somber than usual.
This is just me, I like doing it. Ryobi spotted at 0:50 and Swedish alphabet at 3:46 (I think).
Be well and I am looking forward to the next one!
Alicia from Sweden.
Well Done!!! Everything about it...incredibly talented...considering your age!!
Welcome back dude, good chill video. Some day I would like to get a welder... but hey I got an angle grinder recently, maybe once I steal enough catalytic converters ;)
Nice job!! Cheers from 🇧🇷
looking good!
Very good episode 👏
Wow man good job.👍
Very Cool !!! (Next Project - - - CNC Plasma Cutter !.. Would Be SWEET !!!)
Great job
Concradilesion bro! Nice job!!
belle job mon ami
Very nice video. Did you also build the plasma cutter gantry. I am interested to see the Z axis setup of it. Thanks
What shield did you use for that girbl setup? just wondering cause I been looking for one able to plug drivers into like that! Currently I have to do all jumper crap and stuff for one I have that one looked really clean 🙂👍
Looking good like to make one myself
Badass
Only twist wires in matching pairs, EG a signal source and its ground return, or a positive supply and its negative friend. Just twisting all of them will have the opposite effect, it will increase crosstalk.
Thank you for that info!
Oliver, where did you get the 8 foot rails? All I have been able to find are 3 or 4 hundred millimetre long ones.
Hello Oliver, Long time no talk to. Since we last talked and I was asking you about building a bike I have built several choppers and a bobber. The first was a 1957 Harley Panhead but I was hit by a Ford F350 and was wrapped around a telephone pole and had my right leg nearly torn off. During the time I have been learning how to walk again and building lots of other stuff I built a sportster dirt bike and an XS650 bobber. The XS650 has a right hand thumb throttle, right hand clutch, right foot rear mechanical brake, Left hand shift , a permanent magnet alternator, and deleted the battery and am using a capacitor. Hope you are doing well.
Genius
cool !!!
genius
Just sayin hi. Missing your uploads. Hope all is well.
How you gonna make exhausts and frames and motor mounts out of that?
oliver where are you? we miss you. come back.
Hi my friend question what software are you using for your router cnc
You could cut plywood boat parts!!! 🤯
Why haven't you uploaded in 6 months? COME BACK
Hey Oliver, what is your mos in the army?
hey oliver are you gone forever or are you just busy? i hope you do a goodby video if you are not coming back.
How much did the entire cnc build cost you?
That's an incredible set-up.Wow! Good to see you're setting up for many more options in the future.>Did you set this up so you can 2-D cut 1/2 a shape,and do a reverse and have a whole?Like the fish.If you have thicker wood to shape?(That wasn't a euphemism)
What does something like this cost total
Dude I'm in trouble with the electronics but My table is only 1200x1000mm ish... What u said about the 2 motors kinda threw me for a loop. U said something about changing the wiring to get them working properly together so they sync to move together on both Y axis? I have 1000mm steel sq tubing but I have aluminium too and I think I might use some of both to get more strength into the table. I don't have the room in my 16x10ft workshop for an 8x4 table bro.. I have a table saw, bench drill, planer, and a lot of other tools, and I just don't have room. I would love to be able to build one the same as yours bcos it's an awesome build. I bought the Arduino and all the stepper motors-Nema 23's x 4 but one was damaged and they messed me about giving me a replacement. I have the Z Axis with a 42 stepper on it. I also have 2 nema 17's with the stepper drivers TB6600's x6.. I have a shed load of stuff for the build right now. Do u have a more indepth video about the build and how u got everything squared off b'cos steel can be a nightmare especially if u weld it.
U have built a pretty sick CNC Router. I've only got into CNC's in the last 12 months. I know absolutely nothing about electronics or the software so I'm learning as I go. I have a CNC Laser Engraver too and Lightburn is handy enough to learn but right now with work I don't have time.
Brilliant job anyways my bro.. I need to buy a half decent camera to make some videos myself and put them up on RUclips and start a channel to show my work as I move forward.. For now I want to get building the Router table and I also want to be able to change it to become a Plasma cutter table too.. I'll get there man.. Better late then never, eh?? LOL
Take it easy my bro.. Salute from Dublin, IRE..
Yeah I had to invert the polarity of one of the steppers on the long axis so that they would both spin the same direction given the same pulses. you just swap the two phases. I regret making a table this big lol. I suppose my best tip for making things square is fixturing really well with squares and clamps on a flat surface ( I didn't do too great of a job on that part, to be honest). I also have a 3D printer which is helpful to print out fixtures to get consistent drill holes etc. Sounds like you got a nice shop going! Good luck on your project!
What was the total cost
oh bro, pull on the belts. they must be taut)
Can you please please help out with electronics and the circuit diagram and connections n electronic parts, Please help out I really want to try this project but am poor with connections @ Oliver motorized
What happened to this guy?
No post in five months this guy is dead
Have you got plans available, would love to try this as a hobbyist, great job, new subscriber here, thanks