This is exactly what i was searching for, thanks! In my case though, i wanted my sample to sound longer, but not THAT long, so i just started the original sample and filled the empty space with the loop, imo the result is waaaay more natural than just the loop going on and on and on!
You likely sent it to an audio clip instead of a sampler. To make sure add a new sampler to your channel rack select it and then send it to selected channel again and there ya go you are in business.
63 years later, after civilization has collapsed and the zombie plague has ran rampant and pushed humanity to the brink of extinction, this is STILL the best FLStudio tutorial on RUclips
bruv ive been looking for this for so long best tutorial made on utube straght to the point no fucking about and also explained shortcuts and that, thank you
You're a genius I use this method for opposite way around. For 808's i want them to stop on note but they don't. With this method you can make them stop when u want them too
I've been using FL studios for 4 years and even for a year or two after I had FL studios 10 I was doing all my loops completely manually, thanks a ton! Also would you be able to make a tutorial on isolating effects that don't have wet/dry function? Currently I reverse polarity to create complete destructive interference of the dry sound wave form leaving behind the effect, but it doesn't always work. I hear there's a better way to do it with patcher.
Is it possible to do this: take a vocal sample " Da dum" and put a loop on the "A" then get the sound after the loop end point? so that the result is " Daaaaaaaaaaaaaaa *release key * dum ?
Thanks mate! That's a nifty trick. One question though- Is there any way to get that "wobble" effect away? And with some samples there's this "click" sound at the beginning of the looped sample which I can minimize, but not get red of. Any thoughts on if this is possible?
For FL 20 entire procedure : 1. From playlist select wave form 2. make unique as sample 3. Yes 4. Save to a folder 5. drag that file on to channel rack 6. click on file 7. edit in audio editor( Edison). 8. Left click and drag to Select a short region where the volume is fairly level. 9. Right click tools 10. Tune loop or CTRL L 11. Adjust length, tension if desired / Accept 12. Ctrl A (to select the entire waveform) / Right click / tools / send to selected channel 13. Close Edison 14. On channel rack Channel properties / Use loop points/ This will select the previous selected loop points. 15. play on MIDI keyboard or in Piano roll stretch out note
my quest : Before starting a project , I should create baseline first or I should create the melody first? and if I do one of the two.....they don't match , I mean they are fighting and they don't sound good with the loop or baseline.
Is there a way to apply a loop, to the end of the sample and still let the sample start from the beginning? It then should loop the loop region until the midi note is released.
it's just a tune i made up for the intro...i'll try to get it available to download..are you subscribed? if you are, i'll post a link to the song in my next video, and you'll be notified when it's there.
I know this was four years ago, but any way you can automate where the end point of the loop is so you effectively change the length of the sample looped?
Useful tutorial, thanks. On a slightly un-related note, how do you get that extra grid for your patterns underneath your playlist? I can't find any options in 'view' to enable it.
What version of FL are you using, and which edition? Certain editions have limited features, and older versions of FL - versions older than 10 at least - don't have the pattern section. I can't speak for FL11, because I haven't made the upgrade yet; they may have decided to go with an all in one playlist again.
MrThunderwing No problem. I'll upgrade to FL11 this weekend and let you know what I find out. I thought I read something where they decided to 'simplify the playlist'. I could be wrong, but I'll let you know for sure within the next day or so :) Image-line has a habit of changing up the UI in such a way that it throws people off, so the change wouldn't surprise me.
Hi and thank for this tutorial, i am new to FL so may be you could help me: How do I make a track with a length of one minute, consisting of only a few patterns, recorded in mp 3 file with a length of 5 hours, that is, so that it repeats these 5 hours, but sounds like one song, five hours?
8 years later and this is STILL the most helpful, thoroughly explained fl tutorial on RUclips.
big facts….agree 100 percent
straight up
@The CrumpCast facts 👌🏿
@@bryndonminniefield7143 11 years, its still useful.
@@ChaseDJ549 💯
11 YEARS AND THIS IS STILL THE MOST HELPFUL TUTORIAL
Thank Lord I found you, even if it's been 10 years. This still works in FL Studio 20. Kudos 🙏
Thank you very much! It's surprising that even 12 years later it is still useful.
This is exactly what i was searching for, thanks! In my case though, i wanted my sample to sound longer, but not THAT long, so i just started the original sample and filled the empty space with the loop, imo the result is waaaay more natural than just the loop going on and on and on!
I cant believe that after searching for like 30 mins I would find the answer on a 9 years old video, great work !
12 years later and still a life saver
12 years later still an amazing tutorial
Omg that classic intro is beautiful.. this is a treasure
i feel blessed that I found this. thank you for being concrete direct and concise
Great tutorial and I like how this guy sounds like a good dude
2023 and I’m using this haha. Appreciate you.
OMG - This tutorial is amazing! I love how you explain everything in a step by step manner! I just subbed. I hope you are still making music!
FL 12 seems to be missing the "Use loop points" option in the sampler for me, even though it shows the option in Image-Line's screenshots...
Do what he says and you'll be able to use the loop points
You likely sent it to an audio clip instead of a sampler. To make sure add a new sampler to your channel rack select it and then send it to selected channel again and there ya go you are in business.
@@NowRadio-eu8pv solved my problem good stuff
@@NowRadio-eu8pv THANK YOU THANK YOU THANK YOU
Bro you just have helped alot of one shot kits producers
Classic as fuck tutorial doesnt start until at least 1 min into the vid
yeah, you're right. it was useful though
Very helpful, thanks for this! I've heard of loop points but never knew how to use them properly in FL before this video. Cheers 👍
Even in FL Studio 20 it’s useful 🙏 thanks mate!
Old but Useful !
63 years later, after civilization has collapsed and the zombie plague has ran rampant and pushed humanity to the brink of extinction, this is STILL the best FLStudio tutorial on RUclips
This guy sounds like Aziz Ansari.
Thanks for the great tutorial! This helps a lot with producing 👍
Tips for not sounding like it's repeating itself? So that it sounds more constant?
bruv ive been looking for this for so long best tutorial made on utube straght to the point no fucking about and also explained shortcuts and that, thank you
You're a genius I use this method for opposite way around. For 808's i want them to stop on note but they don't. With this method you can make them stop when u want them too
Omg thanks so much I've been wanting to make vocal leads like DJ snake now I can thanks to you! Thank you life saver person!
Simple, fast and informative. True like
You, sir, are a champ. Been looking for this for SO LONG!!!!!
So simple but so invaluable, this solves so many problems for me 💯💯💯
Been looking for this thank you.It’s a definitely a professional trick.🙏
"I didn't quite know how to end that video" had me dying haha great video thanks buddy
Booyah! I finally fucking learned something from a tutorial video, thanks!
thank you kind stranger from 11 years ago. thank you
thank you my friend!i imagined the point with piano roll but I didn't knew how do it right.thanks again!like from me!
still useful 7 years later
Super helpful tutorial even 12 years later lol
Can I still do this in FL Studio 11? I cant find the "Use Loop Points" option in the channel settings....
yes.
yeah u have to actually load a sampler
Daniel Pencley THANKS MAN!
I've been using FL studios for 4 years and even for a year or two after I had FL studios 10 I was doing all my loops completely manually, thanks a ton! Also would you be able to make a tutorial on isolating effects that don't have wet/dry function? Currently I reverse polarity to create complete destructive interference of the dry sound wave form leaving behind the effect, but it doesn't always work. I hear there's a better way to do it with patcher.
Informative and helpful! Thanks, man!
video starts 2:16 thanks me later
This video is really helpful thank you
This tutorial is pretty good quality. If you'll look up beatgenerals through RUclips they offer other specific tips on these things though..
Awesome tutorial. Thank you. :-D
Is it possible to do this: take a vocal sample " Da dum" and put a loop on the "A" then get the sound after the loop end point? so that the result is " Daaaaaaaaaaaaaaa *release key * dum ?
not what i was lokking for but learnt somthg new thanx
Thanks maan so much help, and simplicity as its best :DD
Finally i know how to do this !!! great vid !
Great job, buddy. Thank you!
Thanks DC2. I am still using FL 9, though I also have 12. I feel 9 is still the best for doing all sorts of things you want without any hassles. :)
Wow bro u helped me...
i was looking for a video as simple as this one!
;)
thank you soo much i wants to know that for a very long time!
Thank you! This was a great help.
You're a lifesaver bro!
he needs a lifesaver
This was head on!! Thank you.
Bruh. Best tutorial 😂🔥
Thanks mate! That's a nifty trick. One question though- Is there any way to get that "wobble" effect away? And with some samples there's this "click" sound at the beginning of the looped sample which I can minimize, but not get red of. Any thoughts on if this is possible?
you can fiddle with pitch settings for vibrato
You make my day
I can’t find the use loop points
For FL 20 entire procedure :
1. From playlist select wave form
2. make unique as sample
3. Yes
4. Save to a folder
5. drag that file on to channel rack
6. click on file
7. edit in audio editor( Edison).
8. Left click and drag to Select a short region where the volume is fairly level.
9. Right click tools
10. Tune loop or CTRL L
11. Adjust length, tension if desired / Accept
12. Ctrl A (to select the entire waveform) / Right click / tools / send to selected channel
13. Close Edison
14. On channel rack Channel properties / Use loop points/ This will select the previous selected loop points.
15. play on MIDI keyboard or in Piano roll stretch out note
wheres use loop points?
"use loop points" is not on the sampler in FL 20. Can someone help? How do I find that now?
Thank you very much still helpful!
Thanks this helped big time , my dude
thanks man!!!! really helped me out!!!!
Hi..Thank u for the tutorial its help a lot.
I am from west papua ( Dani tribe )
i had to export it from edison as a new wave file in fl 12 to make it work
still thanks a lot man
Video starts here 1:53
my quest : Before starting a project , I should create baseline first or I should create the melody first? and if I do one of the two.....they don't match , I mean they are fighting and they don't sound good with the loop or baseline.
that was super from you...EASY !!
thanks, simple and effective
Like i have a piano in FL studio an the notes are SHORT, but they play the full note, an all the pianos add up an create this crazy loud sound
GReat tut mate ! Cheers
Thank you, man! Really! Big thank you!!!
youre a life saver man
Mine doesn't have a place to tell it to use the loop points. I was able to do everything else just fine and I'm using FL Studio 11
me too have you since found a solution
Is there a way to apply a loop, to the end of the sample and still let the sample start from the beginning? It then should loop the loop region until the midi note is released.
still works 12 years later in fl studio 21
Okay, this works BUT, Its got the click sound where its looping!?
Why does for me it cuts instead of looping..
Also why i cant see the loop button
Thanks i really needed it
it's just a tune i made up for the intro...i'll try to get it available to download..are you subscribed? if you are, i'll post a link to the song in my next video, and you'll be notified when it's there.
I know this was four years ago, but any way you can automate where the end point of the loop is so you effectively change the length of the sample looped?
it's very useful for me, but i could not find the way in cubase. Do you have any tips in cubase dude ? Thanks for the video
Great Tutorial!!:)
thnx man, truly appreciate this..
Thanks for this tutorial ! :D
Useful tutorial, thanks. On a slightly un-related note, how do you get that extra grid for your patterns underneath your playlist? I can't find any options in 'view' to enable it.
What version of FL are you using, and which edition? Certain editions have limited features, and older versions of FL - versions older than 10 at least - don't have the pattern section. I can't speak for FL11, because I haven't made the upgrade yet; they may have decided to go with an all in one playlist again.
DC2 Music Thanks for the quick reply. I'm using FL 11.
MrThunderwing No problem. I'll upgrade to FL11 this weekend and let you know what I find out. I thought I read something where they decided to 'simplify the playlist'. I could be wrong, but I'll let you know for sure within the next day or so :) Image-line has a habit of changing up the UI in such a way that it throws people off, so the change wouldn't surprise me.
COMPUTER!!! LOGIC!!! QBASE!!!
SUUUUPER! NEVER HEARD!!!
But how can you create an audio-loop with a low budget ciruit board?
thats so cool! it helps alot
It helped thank you
thanks finally a tutorial that explains that ;3 thanks!
Hi and thank for this tutorial, i am new to FL so may be you could help me:
How do I make a track with a length of one minute, consisting of only a few patterns, recorded in mp 3 file with a length of 5 hours, that is, so that it repeats these 5 hours, but sounds like one song, five hours?
Thanks man, It saves me
spit it out already. thanks!
OMG Please be what I've been looking for!!!!!!!!!!!!!
Thank you so much sir!!!!
Nice video thanks. And I have a similar question. How can you make the whole sample last longer?
options, general settings, and at the bottom
Could you please make the same tutorial but with crashes? The loop thingy just doesnt work good on them...
I can't find the final step of enabling loop points - does anyone know how to do this?
can you do that with one shot chords?