Thank you so much. So glad I found this video. My god I have just received the flywing Bell 206 scale heli and I could not figure it out for love nor money. What an absolute faff. Took several attempts of me twirling and twisting the heli on my pc before it finally said completed. Think that's the down side with doing it in doors on a pc. Guess it picks up the GPS better out doors with a laptop.
Awesome job Joey. Just one thing. In inverted flight mode. change it from easy to Professional. this way when you go inverted you can practice the real inverted controls rather than easy controls. Easy controls will never let you learn 3D the right way. Only Professional controls you can learn the inverted flight inverted controls :)
This is for V2 or V2.5 I just got a new V3 and it seems the compass calibration is easier to do, and not as much necessary as the earlier versions? Also, the V3 GPS sensor is no longer mounted on the tail boom, it's now it the heli body. And with V3 no more belt to tail, it's now a brushless motor on the tail. Also with V3 the auto oval & figure 8 options are gone. Wonder if there will be a V3.5 or V4 and what more improvements there will be? I just got my V3 version on July 15th. 2023.
What a pain all that computer stuff I have a dji inspire all you got to do is move around a few times to get gps lock -have flown it for over 5 yrs now + what about the husband drone flies out of the box !!!!!!!
Muss ich nach dem kalibrieren noch mal die Fernbedienung kalibrieren? Er ist bei Versuch in vom Boden abheben zulassen umgekippt. Do I have to calibrate the remote control again after calibrating? He fell over when attempting to lift off the ground.
Oi amigo boa noite nessa parte de configurar o meu radio só teve contato com o computador só com a bateria ligado será porque será que tenho que ajustar o rádio primeiro?na parte de joystick
once you have calibrated the compass ,do you have to do it again every time you fly the heli,or if flying at a different location ,or is once enough ?same goes with the GPS ,does that work well at different locations?thanks,,
Your Mate says he knows what was wrong in the video on the heli. Could you explain what was happening to cause the issues in the last video I watched. Just for my own mental record. Thanks Mate.
Hello my friend I bought and received the helicopter 2 days ago. Wanting to make some changes to the transmitter on the controls I pressed to return to the factory settings and as I found out afterwards nothing worked. After I downloaded the manual for the transmitter I reprogrammed the functions except for one ... when starting the motor the tail motor starts working but not the central one. Do you know if this can be fixed with some adjustment in the transmitter that I have not done? thanks.
Awesome Heli! I'm, thinking of getting this fw450. I heard it takes 2600mah 4S fine what would be the biggest on a 4S ? or battery compartment size be?
Is there anybody who could provide me a step by step instruction how to setup/program the heli and transmeter. The instruction manual needs more info how to do it, Thanks
Are you sure that the calibration wasn't done by the manufacturer ? There's no mention of it in the Quick Start Guide, nor a link to where & how ? If this needs to be done & isn't described then there will be lots of wreckages ! Where & How please before I bugger mine up ?
If you connect the heli and the red light continues to flash, it means it has not been calibrated. If you connect the heli, and the light is solid and then you can turn on the GPS and it turns green, it means it is already calibrated. You won't be able to connect or take off if the heli is not calibrated. Instructions to calibrate are in the H1 flight controller manual that you will find on the Fly Wing website under "Flight control system", along with the software. You probably won't need the serial port driver and I found that when doing the calibration, "COM 3" worked on both computers I used it on. Just plug a cord into the heli from computer, you don't need to connect it to the transmitter or battery. Keep repeating the movements until the bars reach the end.
Thank you so much. So glad I found this video. My god I have just received the flywing Bell 206 scale heli and I could not figure it out for love nor money. What an absolute faff. Took several attempts of me twirling and twisting the heli on my pc before it finally said completed. Think that's the down side with doing it in doors on a pc. Guess it picks up the GPS better out doors with a laptop.
Thank you for the video. It is very helpful.
Awesome job Joey. Just one thing. In inverted flight mode. change it from easy to Professional. this way when you go inverted you can practice the real inverted controls rather than easy controls. Easy controls will never let you learn 3D the right way. Only Professional controls you can learn the inverted flight inverted controls :)
alishanmao Thanks Ali for the tip. I will definitely consider changing the settings.
@@Mr_Trixsta Why change it,unless you want to learn 3D ?
This is for V2 or V2.5 I just got a new V3 and it seems the compass calibration is easier to do, and not as much necessary as the earlier versions? Also, the V3 GPS sensor is no longer mounted on the tail boom, it's now it the heli body. And with V3 no more belt to tail, it's now a brushless motor on the tail. Also with V3 the auto oval & figure 8 options are gone. Wonder if there will be a V3.5 or V4 and what more improvements there will be? I just got my V3 version on July 15th. 2023.
Hello friend, can the compass be calibrated indoors or does it have to be in the field?
Expecting delivery of mine in day or two, in program said 70% throttle is that head speed?
Thanks for video an compass cali part
My fly wing FW450L is all over the place is that due to compass calibration?
How do you get it to land into the same spot when the battery dies with a drone you have to do a gps calibration at the spot you want it to land???
Awesome video . I just ordered one but I don't have a laptop . Can I calibrate the H1 on my indoor home computer ?
Maybe a bit difficult as you need to do the calibration outside to register the gps.
I just ordered a RTF one . This might sound like a stupid question but do I have to do this when I get it or dose it already come done .
Yes you will need to to do a calibration.
What a pain all that computer stuff I have a dji inspire all you got to do is move around a few times to get gps lock -have flown it for over 5 yrs now + what about the husband drone flies out of the box !!!!!!!
Muss ich nach dem kalibrieren noch mal die Fernbedienung kalibrieren? Er ist bei Versuch in vom Boden abheben zulassen umgekippt. Do I have to calibrate the remote control again after calibrating? He fell over when attempting to lift off the ground.
Is there an App for the FW450 to calibrate and could you fly it out of the box without the laptop etc
Oi amigo boa noite nessa parte de configurar o meu radio só teve contato com o computador só com a bateria ligado será porque será que tenho que ajustar o rádio primeiro?na parte de joystick
once you have calibrated the compass ,do you have to do it again every time you fly the heli,or if flying at a different location ,or is once enough ?same goes with the GPS ,does that work well at different locations?thanks,,
If you plan to fly in other locations then yes it is recommended that you re calibrate just as a precaution.
How do you calibrate it if you don't have a laptop ? Can you use the computer in the house ?
yes you can
So calibration can be done indoor?
@@diamondt88 That was my question
What calibration program are you using there? The connectors are just ordinary USB cables or did they come with the heli?
Can you fly it without doing the calibration?
bonjour pouvez vous me dire si il faut calibrer l'hélicoptère avec le pc pour chaque vol merci
Really having trouble finding a radio and receiver that will work with the H1, any suggestions?
Your Mate says he knows what was wrong in the video on the heli. Could you explain what was happening to cause the issues in the last video I watched. Just for my own mental record. Thanks Mate.
Hello my friend
I bought and received the helicopter 2 days ago. Wanting to make some changes to the transmitter on the controls I pressed to return to the factory settings and as I found out afterwards nothing worked.
After I downloaded the manual for the transmitter I reprogrammed the functions except for one ... when starting the motor the tail motor starts working but not the central one.
Do you know if this can be fixed with some adjustment in the transmitter that I have not done?
thanks.
If you download the software for the H1 and connect your heli, you could just try the install new helicopter and all the settings will be automatic
Awesome Heli! I'm, thinking of getting this fw450. I heard it takes 2600mah 4S fine what would be the biggest on a 4S ? or battery compartment size be?
37x45x130mm
@@chun-kitleung5640 Thanks man
Hi the belt on mine is not very tight ,is that right
yes it should have some free play in the belt but not too much.
Hi sir am having 450 flywing mine is shaking while in the gps mode heli head shaking
Aren't they ready to fly straight out of the box. I was hoping so
They are but it’s recommended ( even by the manufacturer ) to give it a calibration in a new area.
Hello, do you happen to have the callbration link in ENGLISH,
Can I fly my fw450 without gps manual flight?
Joe is there FW450 V2 software for Mac pc? Please let me know thank you, great videos!!
Nope,only software for windows based PC
Tengo un N360 FD con un transmisor skyfly i6s y no se vinculan
Is there anybody who could provide me a step by step instruction how to setup/program the heli and transmeter. The instruction manual needs more info how to do it, Thanks
What program is on the computer? Where do we access it? The whole video is useless without that!
Are you sure that the calibration wasn't done by the manufacturer ? There's no mention of it in the Quick Start Guide, nor a link to where & how ? If this needs to be done & isn't described then there will be lots of wreckages ! Where & How please before I bugger mine up ?
If you connect the heli and the red light continues to flash, it means it has not been calibrated. If you connect the heli, and the light is solid and then you can turn on the GPS and it turns green, it means it is already calibrated. You won't be able to connect or take off if the heli is not calibrated. Instructions to calibrate are in the H1 flight controller manual that you will find on the Fly Wing website under "Flight control system", along with the software. You probably won't need the serial port driver and I found that when doing the calibration, "COM 3" worked on both computers I used it on. Just plug a cord into the heli from computer, you don't need to connect it to the transmitter or battery. Keep repeating the movements until the bars reach the end.
Como lo vinculo por que me sale binding to RX
Hi Joe
Do I have to calibrate the heli every time I fly?
Alvin Lerpido No just the one time. I would also suggest to calibrate after a repair if you ever crash.
JoeDeMagico Thanks
This would be great without the music. It blocks your voice so we super seniors have difficulty hearing what you are saying.