How to Make a Custom Guitar PedalBoard
HTML-код
- Опубликовано: 4 июл 2024
- In this video I show you how I made a custom guitar pedal board out of walnut.
[ 20% OFF DIY PEDAL PARTS] - bit.ly/31crfLF
MBM20 at checkout (limited time only)
--------
WEST COAST PEDAL BOARD [Parts List] - bit.ly/31crfLF
-Electronics Kit 3 (includes 1 power harness/2 audio harnesses/Instructions and hardware - bit.ly/2KjP5OV
- Power Harness only - bit.ly/2Kf8emo
- Audio Harness only - bit.ly/2T1xvTI
- Rubber Feet - bit.ly/2OSHb4L
- Pedalboard Carpet - bit.ly/2yxCpOL
-----
PATREON - / madebymitch
Thank you to my Patrons!
-Chuck L.
-Tony at Way Woodworking
Are you interested in supporting the channel and getting behind the scenes content? Join the Patreon community!
------
Box joint Jig Video -- • How to Make a Box Join...
------------
Project Resources, materials, and tool links below. Some of these are affiliate links, so they do help me out. Thanks for your support!
--------------
OTHER PROJECT VIDEOS YOU MIGHT ENJOY
Writing Desk
• DIY Modern Writing Desk
How to make a Bandsaw Box
• Making a Bandsaw Box
--------
MATERIALS
--Walnut board
--½” Plywood
--¼” plywood
--Woodglue - amzn.to/337WJV0
--Danish Oil - amzn.to/2YFvmOO
--Polyurethane - amzn.to/2YnjQw0
--Pedalboard Electronics - bit.ly/2KjP5OV
--Spray Adhesive -amzn.to/2ZzIx5i
--Pedalboard Carpet - bit.ly/2yxCpOL
--Rubber feet - bit.ly/2OSHb4L
--Hinges - amzn.to/2ZtQjgX
--Magnets - amzn.to/2KfWj7L
--------------
TOOLS
--Circular Saw - amzn.to/2QrYDwh
--Miter Saw (or circular saw)
--Table Saw - amzn.to/2yBtewM
--Jointer - amzn.to/2YmZvXR
--Planer - amzn.to/2T0M5Lf
--Drill and Impact Driver - amzn.to/2FTwOpi
--Jigsaw - amzn.to/2yylEmH
--Trim Router - amzn.to/2YF0VYX
--Forstner bit set - amzn.to/2yxnfJu
--Random Orbit Sander -amzn.to/2H2pgCJ
VIDEO MUSIC -- bit.ly/2AKAibx
---------------
Find me around the web!
Website - madebymitch.net
Instagram - / made_by_mitch
Twitter - / made_by_mitch
Patreon - / madebymitch
#guitarpedalboard #custompedalboard #pedalboard 
Хобби
![Custom Pedalboard [Part 2] Wiring Installation](http://i.ytimg.com/vi/5zc8YZZQVKs/mqdefault.jpg)
![Custom Pedalboard [Part 2] Wiring Installation](/img/tr.png)
Brother that's not a pedal board! That's a freaking piece of artwork. You are a true craftsman my friend. Very much what I am wanting to build for my setup. Amazing!!
it looks amazing! I am definitely using this design as one of my references. it has a few design things i would've chosen to handle differently just for durability purposes but overall it's a well made and beautiful pedalboard. Amazing job! and thanks for taking the time to make the video.
Absolutely beautiful board. What a build. Thanks so much for sharing your process.
Such a pleasure watching a craftsman work. That looks fantastic.
Bro! Amazing job. Just now getting into the pedal phase of my guitar career lol. And I need a board! This is a great one you crafted here. Hope whichever one I eventually get or build is half as nice as this!
Thanks for posting this. Kit ordered.
This is incredible, thank you so much. It is beautiful and handy! Amazing work!
You are so talented!! I love watching your videos. Thank you so much for sharing.
Thanks Sharon! I really appreciate that!
Awesome build!
Looks fabulous! Thanks for the video 🙏
That thing is beautiful, great work!
Very nice! Like your safe style of working.
Unreal! That's basically an heirloom! Love that finish. Try to upload a short vid of it all loaded and rocking with your gear. Well done my friend!!
Awesome project, man!
Thanks so much Joe!
Beautiful work.
Thank you
Dude! Love your box and love the Savior shirt
That thing turned out cool! I like the old school touches too.
Thanks Bruce! Yea the vintage lamp was a cool addition to it.
really great man...congratulations from brasil!!
Really like this pedalboard, very nice job.
Thanks Brett!
Nice! Really beautiful.
Thanks David!
Nice work!
Bro you did a GREAT job!
I love it! great work. I would buy that for sure. I wish i had tools to do this!
excellent video, thx for the inspiration
Dang dude! Box joints??? Things are getting pretty classy on this channel! 😁 It looks awesome; great job!!!
Haha! I've come a long way.😂 It's been the most challenging yet for me. Tons of fun though. Thanks man👍
Turned out nice. Good job!
Thank you!
Awesome job
GREAT JOB
Awesome man!
Thanks !👍
Bro, I made this amazing pedalboard of your vid! Would actually love to show it. Really thankful for your job here!
Only one tip
On the back i added holes to get power cables for the pedals through. It’s very useful for pedals that are in the top row.
Loved the video
Thanks Philip!
Love the shirt
That’s amazing.
Love the work love the 👕.
I built something like this ages ago and am planning on taking another crack at it this summer, more like what you have. The one I made had tunnels in it for routing wires, which didn't work in practice because the wires moved around in the chutes and prevented closing. BUT I have an idea- Instead of tunnels, run dowels through the inside and then wrap the excess cable around the dowels. Then excess wires can be hidden when I'm at home and the full cable length and be unraveled when needed.
Wow that's really nice. I've been thinking of making one very similar to this and your video will be a big help.
Thanks. I'm glad the video was helpful! 👍
Amazing job mitch.... This is perfect for worship board....
Gob bless you brother....
P.s..... like the shirt and baller NICE!!!!
Inspiring!
Thanks Mark!
I think a lot of people don't start woodworking because they're intimidated by the tools, angles, mistakes, etc and they forget that you can practice first! test stuff out on scrap wood/cheaper wood. practice joining boards, practice using differnet kinds of drill bits, router bits, etc. I understand why it can be scary but you don't have to try out ew ideas on like $80 pieces of mahogany or your final project materials only
People don't have the equipment or space for it
I built a very similar board except I wrapped mine in tolex and use chrome corners. It looks just like an amp. I also have 5 input jacks: IN, OUT, EFFECTS SEND, EFFECTS RECEIVE, FOOT SWITCH. I used locking jacks with colored rings. I color coded the wires to the rings around the jacks. I need to make a new one because it is just too small. My new one will be 32" x 16".
Nice! Now, let’s see it in action!
Yess!! Thanks man.
great
crazy man ....
Excellent work 😮😮, will you have the measurements of the wood cuts?
3:48 thank god that wasn't a bottle of beer.
Aaaa vc é o brabo de konoha
Looks amazing! Do you by any chance have info on the dimensions, building plan/scheme. I want to build myself one without ordering the kit.
nice
Nice video... thanks for sharing!! Coupon code still works. Just saved $18 ordering my kit.
Let me start by saying this is beautiful, my only concern would be how is it supported in the middle because it looks like there’s very little support on either the sides or the middle to prevent it from caving in.
My first thought is wondering if the heat of the power supply would get trapped inside and affect longevity. Really pretty looking board, but not sure I would put a bottom on it like that
Great video! What are the hinges and magnets that you used?
Thanks for the inspiration Mitch! Where did you get that gorgeous rough cut walnut lumber? Almost looks like mahogany. And is that just the “Natural” Danish Oil color you used for the finish?
I love the finish. Did you use the "natural" Danish Oil or did it have a tint?
This is a really nice pedalboard but very difficult to build it. Firts of all you need to be a great carpenter 😁
Nice video 👍
Very good job! Did you use kitchen hinges or something dedicated? And the holding magnets ? Where I can find them? Thank you!
Can we see a photo of it with the pedals in place? And what does it weigh?
Hey i saw this video its great man loved it even i am trying make one but dont have the all the tools . How much would you charge for this kind of pedal board ??
What thickness did you chose for the walnut? Should I go 4/4 or 5/4 ?
What hinges were used? Looking to make something similar that will hold the lid shut at an angle. Also will lock open so it can be opened and stays open while moving things around inside.
A lovely board but I'd love to see how to do something like this with basic equipment like a chop saw.
I would like to aquire one of these in a hot rod cherry finish
That would be awesome!
I'll have to call RUclips, they didnt send me a notify me when you uploaded! Love the box joints with those angles!
Thanks man! I appreciate it. It was a pretty big learning curve for me, but totally worth it.
Excellent video man! Where’d you get the magnets that keep the pedalboard lid closed?
Thanks! I got them from Amazon.
Love your shirt bro!!!
The power block is underneath I assume, correct? Where do all the adapters come out of to plug into the pedals the side hole? Thanks
Is the deck made from 1/2" or 3/4" plywood? Wondering if 1/2" would be strong enough while saving on weight
I was wondering how big the angle at the top of your Pedalboard is... I´m building one by myself right now, would it be possible for you to check that and the height at the front and back? Thanks in advance, Tim
I don't get it. Where do the pedals go? If inside, do you have to leave the lid up or can you detach it? If on top what is there to protect the pedals during transit?
can i question bro ?, you use pure tone mono or stereo jack ? im from indonesian. thanks
Where can I buy one?
very nice! exactly what my plan is to do this year for my pedals :)
But I have a question: Doas anyone know a german seller of all these parts like west coast is doing?
I´d like to have shorter delivering-ways an less tax/ custom fee...
Very cool! I am not aware of a German seller of the parts. You might be able to find some things on Amazon? I'm not sure. Sorry, I wish I could help.
Be grateful. I would never have any patience for that. So bad ass. I love how different human brains are than others. Beautiful world..... that said. ... where are the god damn pedals!
Que medidas de inclinación tiene? Gracias
permisi kak..itu pakai kayu apa..pakai cat apa
Hello, how are you? Could you pass the measurements in centimeters or millimeters? In my country we don't use inches, so it becomes difficult to convert to centimeters or millimeters. Thank you.
Hi, could you give me the information of the measures of the woods?
Hi Gino0. Total size was 24x12.5. the from was 1.5" high and the back was 3.5 tall but I should have made the back 4" tall. All the boards were 5/8" thick. Hope this helps.
If you ever want to sell that board I would happily buy it
Looking for hinges for my pedalboard project. What kind did you use?
I got my hinges from Amazon. I think i have a link in the description of the hinges I used.
My question is, what is the angle?
Beautiful build. How do you like that Ridgid planer?
Thanks Pete! I love it. It has held up very well.
@@MadebyMitch Thanks Mitch
Hi Mitch, great board! I only have one question... As for the size of the top, did you have to cut it down at all to allow for the felt? It looked as if it was a tight fit when you attached the hinges. Thanks for the amazing DYI video...
@Mark Kuklinski hi, no you don't need to. Check my tutorial, and feel free to ask me. ruclips.net/video/pQtjHsmkzM8/видео.html
@@mrcustomx Thanks for the update! So looking at your two different builds, I am following the finger joint version. Where I am a little confused is when installing the top it looks like it is raised about 1/4" above the sides. But when you are installing the supports and hinges, it is flush. Thanks again for all your great videos!
@@markkuklinski9969 in my pedalboard the top is flush. Then when i put the velcro the result is raised about 1/8", but is just the velcro thickness. Remember to leave that thickess on the sides, between the top and the sides of the pedalboard. If you like my work please subscribe to my channel, thanks!
Which type of hinges did you use ? I’m having troubles getting the right hinges
@Matteo Alonzi Io ho usato queste, 10€ su Amazon. Se hai bisogno di info chiedi pure. ruclips.net/video/pQtjHsmkzM8/видео.html
¿Alguien me puede decir como se llaman esas bisagras?
What thickness of board did you use for the pedalboard frame?
Hey Jason, the boards we 5/8" thick.
Brasil alguém ?
you could send the template with the dimensions of the pedalboard sizes, length, width, height! thanks!
(sorry for my english, i used google translator kkkkkkkkk)
It's hard to tell in the video.. how much do the 1/4" jack ferrules sink the jack? Is it too far for a 90 degree plug to work there?
Hey Chris! The actual 1/4" jack threads into the ferrel. It sticks through almost flush with the outside of the board. I'm sure a 90 degree plug would fit.
@@MadebyMitch Thanks!
What audio harness length did you use 15 or 24” and the jack orientation?
Thanks
Weight?
u would have to be furniture builder to make this a lot of us don't have access to your awsome tools
Umm? It needs a lid so your pedals don't get dirty or loose when you go on the road?
Can I just buy one 😩
Greeeeat job! Far from diy for me... I wish I had skills/ experience/ tools to do that
👏👏👏👏👏👏👏👏👍👍👍👍
I like it. The wife would be less likely to complain about this one sitting in the middle of the floor.
I gotta say,thus is way difficult for me as 1) not looking to buy a shop full if tools and take woodworking classes jyst to make a floor board. Buy cheaper thru company
Hopefully this vid shows how these actually work because WCPB doesn't have any vids talking about that. They've got plenty showing the different colors, etc...though 🙄
Edit: nope.
someone has the measures D:?
24"×12.5", rear 4" high, front 1.4" high, boards 5/8" thick
I don't have a saw so I snapped the wood to size with my teeth then I chewed extra wood into mulch for my plants!!! 🤯🤯🤯
No cut list? 😒