Can a Dryer Cure 260 Shirts per Hour for ONLY $0.52 per hour in power??
HTML-код
- Опубликовано: 2 июл 2024
- A Closer Look focuses on the Little Red X2 30" x 7' dryer from Vastex. From the Lower power consumption of Only $0.52 per hour (based on avg $0.10kwh) to the Digital Controls & 15 Year Heater Warranty. Check it out in our Atlanta Showroom or we ship nationwide for $9.95 per order.
Want to know more? Click here kolormatrix.com/screenprint%2... 
Наука
Is this conveyor a loud dryer? Thanks.
Is there a belt extension on that already, or is that the stock length?
This the stock length. It is upgradeable, so you can make it longer in the future.
Can this X2 actually cure waterbased successfully without 2 passes?
Yes but heavy deposits like white ink, especially DTG will cure with ease in the DTG version of this dryer. X2D-30 has a booster panel to cure even heavy ink deposits at as slow as 3 minutes if needed.
@@KOLORMATRIXAtlanta Thank you. I was comparing the spec sheets for the X2 and X2D from a waterbased perspective. The X2 states 90 waterbased shirts at 50 seconds vs the X2D at 120 shirts, yet the chamber length on the X2D is 23cm shorter at 69cm. I understand this is due to the additional heating element on the entry to the X2D dryer. If you were never going to print DTG, are there any circumstances when the X2 would be preferable to the X2D (longer dwell time for instance)? Really can't decide.
@@chriseagland yes the longer dwell time and booster heating element could be very useful with heavy ink deposit, ie white ink, HSA inks or super cover inks as well.
@@KOLORMATRIXAtlanta Hi there (again),,
I recently purchased a fully functional Vastex Econored 2, 30 inch (in the UK). I believe the year of manufacture was 2013.
Upon starting the dryer this evening, I saw power to the system and the fan started, but the temperature settings and belt did not start. The only light in is the red power light.
I removed the control panel on the side and the 2 fuses are intact. The chain is also on the motor.
Do you know what could have caused this and a likely solution? The dryer was bought from a reputable source, has had very little use.