the most important thing you didnt said. T7000 is black and it dont allow light to pass thats why its better for lcd displays! So the lcd backlight wont go thru the screen frame and "leak light"
How many applications does this 15ml tube last? I'm going to change the battery on my cell phone (glue the back cover) and reattach the screen of a Mi Band.
Hi, thank you for sharing, I need a black liquid glue for bonding that when will dry get to black finish color and strong like epoxy. I am using epoxy now, but it drys grey even though it say it will dry black. Any idea. I need it get harder as rock like the epoxy I am using but hard to apply. Thinking liquid it will be better for me.
Does it work well to put more (to make sure is sealed) and wipe the excess right after fitting the screen ? Would that work or is it messy ? Or maybe it works to remove the excess after it dries out ?
You can add more if you want. Just don't do it too much. I think it's better to remove excessive glue while it's still wet. Don't remove it when it already dried as it might "torn" the adhesive.
I used it weeks later, it is a very good glue for screens. I think you are able to wipe it when wet and dry without it leaving any marks on the exterior of the phone (regardless when you wipe it) and the excess that gets trough the parts, is so thin that wiping it cannot drag the underneath adhesive with it. As the thiny edge of the phone is like an "L" I think it works best to make sure glue is only on the base part (towards the phone) and not getting on the vertical edge (and getting outside). Extra glue on the vertical edge could make screen harder to seat and might force it out of place. But is not hard to work with it, a very nice glue.
For me b7000 is quicker in drying and safer for lcd repair because based on my experiences t-7000 is more diluted ,can easily damage an lcd if you apply too much
Bhai me jayada hoshiyaar bnne ke chakker me mene khud hi screen glue krne ka try kiya but is t-7000 glue se mere screen pr kaale daag agaye hai koi pls btado ye thik hoga ki nhi 😢😢
the most important thing you didnt said. T7000 is black and it dont allow light to pass thats why its better for lcd displays! So the lcd backlight wont go thru the screen frame and "leak light"
So as a conclusion t7k is better?
@@Samuraji deppends, in my case i used the black one because i was fixing a screen. so it avoids backlight going out from the case
This is what I want to know.. Very helpful. Thanks!
Thanks, my friend.
B should mean black
T should be transparent xD
They have done it reversed and because of it I accidentally got T (black) once
LOL, I agree with you
Will me s10 be waterproof again if I change back cover and use the T7000 adhesive instead of the original double sided tape? 🤔
U need tape and glue if you Change the back case
No
thank you for helping me make an informed decision on my purchase
Thanks for the content ....but what about reheating with heat gun or pad?? Do they both become soft again at same temp?
Never tried, but I guess it will soft again.
can this Glue be heated to take the screen off?
How many applications does this 15ml tube last? I'm going to change the battery on my cell phone (glue the back cover) and reattach the screen of a Mi Band.
Hi, thank you for sharing, I need a black liquid glue for bonding that when will dry get to black finish color and strong like epoxy. I am using epoxy now, but it drys grey even though it say it will dry black. Any idea. I need it get harder as rock like the epoxy I am using but hard to apply. Thinking liquid it will be better for me.
Please, I need help. Which one is better for fixing plastic smartphone cases?
Does my device be again waterproof after pasting?
Does it work well to put more (to make sure is sealed) and wipe the excess right after fitting the screen ? Would that work or is it messy ?
Or maybe it works to remove the excess after it dries out ?
You can add more if you want. Just don't do it too much. I think it's better to remove excessive glue while it's still wet. Don't remove it when it already dried as it might "torn" the adhesive.
I used it weeks later, it is a very good glue for screens. I think you are able to wipe it when wet and dry without it leaving any marks on the exterior of the phone (regardless when you wipe it) and the excess that gets trough the parts, is so thin that wiping it cannot drag the underneath adhesive with it. As the thiny edge of the phone is like an "L" I think it works best to make sure glue is only on the base part (towards the phone) and not getting on the vertical edge (and getting outside). Extra glue on the vertical edge could make screen harder to seat and might force it out of place. But is not hard to work with it, a very nice glue.
thanks for the follow up on your experience, it's rare to see in comments @@adrianTNT
it was really really helpful,,, thanks for the contribution and keep up the good work :)
Are they both stronger then the e6000 zhanlida clear glue
very useful and clear video for the comparison.
does this work on Phone? like Poco X3
Amazfit 7 also same problem...
Thank you for the video
Bro can it damage watch’s charging port connector/ribbon (which is like an orange connector) ???
Great!
Did you apply glue on both sides or only at screen?
As I remember I only apply on one side (the screen as in video).
coy, lem T-7000 dijualnya di mana ya selain di online store? ane nyari di ACE Hardware offline store kagak ada.
Thanks, it works great on my watch
Thank you for good comparison! For me, very usefull!
Are they paintable?
Never tried it before. But I think it's better not, because paint sometimes contain diluent / thinner than can affect the glue.
Thanks i was looking for this video
Thank you! I have to fix my Versa II Fitbit smart watch.
අයියේ මේ ගම්බොතල් තියේන්නේ මොනකඩවල්වලද? අයියේ ශ්රීලංකාවේ අයියේ
Daraz eken online oder karanna puluwan
For me b7000 is quicker in drying and safer for lcd repair because based on my experiences t-7000 is more diluted ,can easily damage an lcd if you apply too much
bang. beli b7000 yg asli dmn? saya beli di shopee, palsu deh kayaknya. baru 1 bulan dah ngelotek lagi backdoor hp saya
T should be transparent and B should be black right? Sorry no offense.
No
Had the same issue on my Huawei gt2e
My brother can you make in depth review on dt8 ultra max smart watch please ❤
I'll make a review when I got the product
This happened to My Galaxy watch 3 active
T = transparent B = Black W= white
Actually its counterintuitive... B is transparent and T is black 1:38
Thank you reviewnya bang, kebetulan mau ngelem smart watch juga ni jadi makin yakin👍
pity the top of the screen was blowing bubbles so it wasn`t success
Thanks a lot of your explication
Thanks for the info 👍☺️
yes this was helpful, thanks! 😊
merci c est tres clair , et facile a comprendre .
very helpful... to not buy mi band again (my mi band 5 display fall off)...
thank you bro .
B for Transparent
T for Black
Thanks
thanks man 👍🏻👍🏻👍🏻👍🏻👍🏻
Thank, very nice review
Wow, jamnya kembali waterproof, beli lemnya di mana ya kalau bukan di toko online?
Di toko service atau yang biasa jual aksesoris handphone mungkin ada bro.
Thank you
Thanks ,you help me alot
T IS (B)LACK
B IS (T)RANSPARENT
WHAT DA HECK? 🤢
ha ha that's exactly my thought at first
THANK YOU!
Good job bro
Very interesting
Mera screen kharab hogya t7000se
Like no : 535
👍💯
I love it
Iqoo z6
Bhai me jayada hoshiyaar bnne ke chakker me mene khud hi screen glue krne ka try kiya but is t-7000 glue se mere screen pr kaale daag agaye hai koi pls btado ye thik hoga ki nhi 😢😢