The oxygen I have running at the highest level you can run the concentrator (I have no regulator on the concentrator), and I have my propane set at about 2.5-3 psi. All my flame adjustments are done using the torch knobs.
Jeannie Cox The M20 runs at 20 psi I believe. That might be to much for the minor, the extra psi at full blast could be cooling down the torch. I've read its suggest 5-8psi Oxy and 2-6 propane.
Matt J Hi Matt - - the M20 is 15psi, and I am using a Mega Minor torch (the slightly larger minor) and the concentrator isn't too much for it. According to many specs, the M.Minor runs at full capacity on an M20, but only at 90% on an M15. And if I were on tanked oxy, my torch would seem even more powerful even with having my regulator set at 8psi - - I think because of the pressure (LPMs). Here's one list - - artistryinglass.on.ca/charts/oxygenrequirementsfortorches.html
We miss you Jeannie. I learned so mutch from watching your videos. Even though some are off shift glass I enjoyed learning. ❤❤.
Thank you. This is my torch and I have a concentrator also. It is nice to see this set-up in a video.
What kind of glass was used?(clear tube) And is it the same with the blue glass?
Thank you so much for the demos I'm new to glass they are so helpful.
This is a great video! Thank you so much. I have one question. What kind of torch are you using? Thanks
In this video, I am using a Mega Minor torch.
I have the same torch with the same ex 20 in what number do you let it on the regulator so the torch work properly??
The oxygen I have running at the highest level you can run the concentrator (I have no regulator on the concentrator), and I have my propane set at about 2.5-3 psi. All my flame adjustments are done using the torch knobs.
Jeannie Cox
The M20 runs at 20 psi I believe. That might be to much for the minor, the extra psi at full blast could be cooling down the torch. I've read its suggest 5-8psi Oxy and 2-6 propane.
Matt J Hi Matt - - the M20 is 15psi, and I am using a Mega Minor torch (the slightly larger minor) and the concentrator isn't too much for it. According to many specs, the M.Minor runs at full capacity on an M20, but only at 90% on an M15. And if I were on tanked oxy, my torch would seem even more powerful even with having my regulator set at 8psi - - I think because of the pressure (LPMs).
Here's one list - - artistryinglass.on.ca/charts/oxygenrequirementsfortorches.html
I need to know where to get the glass tubing?
Yup. I run at 6.5 on the scale using it at a higher level tends to cause scum. (I use natural gas.)
Really interesting, thanks!
what brand is the concentrator?
I think I mentioned it in the video, but it's an M-20 concentrator, by Unlimited Oxygen.
It s a unlimited oxygen m20