Todo muy bien gracias, solo que hay que mantener limpia nuestra herramienta ya que a veces es la que nos da de comer, y también no darle a las plantas ni a los animales con la Karcher ya que tiene demasiada presión y es doloroso
was there a fault with this one? did you replace parts? ive got oile leak and water in oil. o ring is in good condition. oil and water maybe mixing through the pistons but no seals found here.
Thanks for the video. I have K2 Telescope, when I plug the extension (Any of two) and trigger first time, works good; then when I release the trigger and push in again, didnt work. I need to remove the extension and plug again and re-trigger, the only way to works. Any idea?
@AlejandroNavarroHMO if it is old " more than 2 years," I guess it is a switch problem. It is stuck and not responding to pulp mechanism function. May u need to replace it
@@fixat-illshowyouhowtofixyourpo Thanks MF, Tomorrow I'll make some test with another one from another friend. I"ll try to test the "Gun" and "Extensions" and everything, If I got some results, I"ll let you know. Thanks for your advice and time.
My Karcher K3 Full control has stopped working. It has no pressure after using it for 30 mins today. It has power and has water coming out. Can you suggest what might be the possible issue and what part needs to be replaced?
Brother.im using K 2.02 karcher..which leaks water from the cylinder head. What is the problem.no oil leak. But leaking g water from the head. Splashing..please advise
@fixat-illshowyouhowtofixyourpo thank you brother.. I dismantled and waiting for karcher oil. Couldn't find gear oil in Australia,so ordered online. Is it OK to put some silicon in between the cylinder head and the other part (which is having 3 steel small rods with springs. They may not be sealing properly??couldn't find any cracks in the housing..can i have your email ID I ll send some pictures.please
My K2 won't start on applied command on nozzle. I disassembled it and it looks like power switch doesn't move that white nipple-alike valve. Plastic parts that should toggle that valve on/off look fine but the switch doesn't move. I can move it with pliers but it seems that it needs a lot more force than any plastic part is capable of. Should I lock it to "on" position or is there any better solution for my washer to make it usable?
@Hrva30 yes most of the issues come from the switch, it need to be replaced, or u can try to grease it and see if it will work, lock it to on will make the motor work all the time and that is not good it, should work with the flow
@fixat-illshowyouhowtofixyourpo haha my bad, I misread the title. I found your video when looking how to fix my k2 (non-basic) 😀 Great video BTW, just waaaay outta my league. Hats of to you sir, on your very un-basic video
Todo muy bien gracias, solo que hay que mantener limpia nuestra herramienta ya que a veces es la que nos da de comer, y también no darle a las plantas ni a los animales con la Karcher ya que tiene demasiada presión y es doloroso
Merci beaucoup pour cette vidéo ça ma beaucoup aider a réparer mon karcher
Great voice of azan 👍
Thanks for the video! Could you tell me please. What type of oil is used and recommended amount in ml? Is it ok to use 15w40?
5w30 is recommended 80-90 ml
Yo le pongo 20/50 y más cantidad
En mi casa tengo 10w30 se lo podria poner?@@fixat-illshowyouhowtofixyourpo
¿Se podria agregar 10w 30 en vez del 5w30?
was there a fault with this one? did you replace parts? ive got oile leak and water in oil. o ring is in good condition. oil and water maybe mixing through the pistons but no seals found here.
Mixing water with oil means the small white plastic water piston has broken
3:43
the horror movie ambient sound complete with droning noises and crows is just perfect!!!
you could use 10w30??
I've trying to do like you but ...😅 The water go out from anywhere 😢 could help me ?
Could u send a video
@@fixat-illshowyouhowtofixyourpo where on the youtube ?
@@tewdatew1033 yes
can you tell me the details of that carbon brush for Karcher K2?
5×10×17.2
Hola, ya he remplazado los dos engranes de plástico y los sigue rompiendo.
¿Cuál podría ser la falla?
¿Organizaste cada parte como estaba? y tienes que revisar la caja de engranajes si está lisa o si tiene daños.
5:55
Thanks for the video. I have K2 Telescope, when I plug the extension (Any of two) and trigger first time, works good; then when I release the trigger and push in again, didnt work. I need to remove the extension and plug again and re-trigger, the only way to works. Any idea?
@AlejandroNavarroHMO if it is old " more than 2 years," I guess it is a switch problem. It is stuck and not responding to pulp mechanism function. May u need to replace it
@@fixat-illshowyouhowtofixyourpo Thanks MF, Tomorrow I'll make some test with another one from another friend. I"ll try to test the "Gun" and "Extensions" and everything, If I got some results, I"ll let you know. Thanks for your advice and time.
Hola, alguien me podria decir que clase de aceite ultiliza esta hidrolavadora? Por favor y gracias 🙏
15w40
Which oil and what amount in ml?
You say two different in the coments
@@corsamannen both work, 15w40 recommended by karcher
Que cantidad de aceite @@fixat-illshowyouhowtofixyourpo
Hello. Hi. My waterjet doesn't have pressure. Motor pump keep running. What's the problem?
This 2 plastic gears could be broken 7:17
@@fixat-illshowyouhowtofixyourpo Owh. Ok. Understood. Thanks for ur reply
I have exactly the same problem - I've not yet opened it up to have a look at the gears.
Thank you
The plastic body is a pain in the asss to get it well in place i still dont have it on place do you have some tips please?
The motor housing or the outer yellow body?
Hi. Is there a way to repair the switch? I don't find a replacement anywhere😢
@franalmenzar5888 Yes , u can disassemble the switch and clean it with contact cleaner
My Karcher K3 Full control has stopped working. It has no pressure after using it for 30 mins today. It has power and has water coming out. Can you suggest what might be the possible issue and what part needs to be replaced?
@@knight2019 it could be either switch stuck or motor has damaged
Tan poco aceite ?
Brother.im using K 2.02 karcher..which leaks water from the cylinder head. What is the problem.no oil leak. But leaking g water from the head. Splashing..please advise
@rukshanfdoable ,there may be a crack in the black plastic housing
@fixat-illshowyouhowtofixyourpo thank you brother.. I dismantled and waiting for karcher oil. Couldn't find gear oil in Australia,so ordered online. Is it OK to put some silicon in between the cylinder head and the other part (which is having 3 steel small rods with springs. They may not be sealing properly??couldn't find any cracks in the housing..can i have your email ID I ll send some pictures.please
I'm VERY concerned about that rubber o-ring seal that has been left out @13:56 !
6:50 , that was old one
Se podria agregar 10w 30 en vez del 5w30
@marlonbarrero4365 if you asking, then yes you can
My K2 won't start on applied command on nozzle. I disassembled it and it looks like power switch doesn't move that white nipple-alike valve. Plastic parts that should toggle that valve on/off look fine but the switch doesn't move. I can move it with pliers but it seems that it needs a lot more force than any plastic part is capable of.
Should I lock it to "on" position or is there any better solution for my washer to make it usable?
@Hrva30 yes most of the issues come from the switch, it need to be replaced, or u can try to grease it and see if it will work, lock it to on will make the motor work all the time and that is not good it, should work with the flow
Tengo una k2 pero me pierde agua como puedo sacar la bomba sin desarmar la parte que lleva aceite ?
Si
Desatornille los 4 tornillos en la parte de la bomba, no en la parte del motor.
Desatornille los 4 tornillos en la parte de la bomba, no en la parte del motor.
first of all thanks, but next video how to restore tile grouts
Bonjour. J'ai une fuite d'eau lorsque le karcher marche. J'ai démonter et j'arrive pas a reperer la piece défaillante. Merci
@@MrDAWEST face avant ou face arrière ?
@@MrDAWEST essaye de changer tous les joints toriques
@@MrDAWEST O ring
@@MrDAWEST et parfois, il y a une fissure dans le boîtier en plastique, vous devrez donc peut-être le changer
@@MrDAWEST 4:08
My karcher k1 is always on, automatic is off, can you help me sir? Whats part i must replace? Thanks
The switch 14:11 needs to be changed
Or u can lubricat the switch. Hopefully, it will unstuck
@@fixat-illshowyouhowtofixyourpo ok sir i will tray. thanks
Good video. But so irritating that you don't just clean and wipe off the oil from your hands so your can use all your fingers.
I wouldnt consider taking the entire mechanism apart and reconstructing it "basic" 😂
@@MattSmith-yq3rr the machine is called " karcher k2 basic"
@fixat-illshowyouhowtofixyourpo haha my bad, I misread the title. I found your video when looking how to fix my k2 (non-basic) 😀
Great video BTW, just waaaay outta my league.
Hats of to you sir, on your very un-basic video
Le mien ne marche pas je ne sais pas pourquoi
Fault switch or motor
You forgot for O ring putting.
@raveendranm3512 No, I didn't. That was another spare
Hello
Hi
You can’t talk??????
What do you want to hear?
Merci beaucoup pour cette vidéo ça ma beaucoup aider a réparer mon karcher