Had a buddy make a transmission crossmember out of 3/4 angle iron to run 5 feet of 3" straight pipe off the headers into Cherry Bomb Salutes and 2 foot pipe off of them, where I plan to put some turn downs right above the real axle
I plan on using the speed engineering shortys on my 2wd k5 build. Glad to see they have plenty of clearance. I usually would run Borla’s but those venoms have a great sound to them. How’s the drone inside the cabin?
You'll have plenty of room with SE shorties or longtubes. Great bang for the buck! And no drone. Seriously. The mufflers are loud but they do not drone.
Definitely bc no drone with these. The wheels are @detroitsteelwheelco Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are @continentaltire DSW06 - 265/35/22 up front and 285/35/22 in rear.
matt vorhees you’ll see in the video, we tried to make the x pipe work but the driveshaft is occupying the same space. And since I’m bagged, the articulation needed in the driveshaft is more important than the x pipe. And these black widows are loud but they don’t drone thankfully.
Ok cool! I enjoy your videos! I’m hoping to get my Grandpa’s ‘78 C10 longbed going this year. He bought it to bring me home from the hospital, but by the time they got here from Oklahoma I was already home.
They are @detroitsteelwheelco Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are @continentaltire DSW06 - 265/35/22 up front and 285/35/22 in rear.
Legit bone stock Gen 4 5.3 with 140k miles. Headers and air intake only. There’s a video on the truck we pulled it from on the channel. 2011 Silverado.
Sounds good man!! I have to ask why the 250s instead of venom race or the widowmakers?? I’m trying to decide what route to go, just wanted to pick your brain on your reasoning. Thanks!
To be honest, bc I have very sensitive ears and I drive these trucks all over the country so I wanted quiet but old school sound. Unfortunately, I did not like the 250s and now run Borla Pro XS.
@@UNITEDBYTRUCKS What's crazy at idle or just cruising is not as loud as my old flowmaster but when I get on the gas it wakes up. I think the black widow just has a cleaner and crisper sound. Thanks for posting the videos.
To each their own. I think it has a real classic idle. I’ve got more footage where the idle has been tuned etc that shows the sounds better. Video coming soon.
So I'm stuck between the 2 mini monsters. I put a pair or angry housewife's on my v6 which wasn't anything too special but it's pretty loud. I have an 81 GMC k2500 with the 350 in it and I want to know which has overall best sound and volume...the angry housewife's or the neighbor haters. Let me know soon please cuz the cam I got in it ALLREADY sounds better then sex on the beach
Most underrated exhaust brand period
Agreed ! I have 2 - 3" in/out widow makers on a 2008 mercedes sl 550.. sounds insane
I'm just finding out about it this year!
@@kevinthomas2906they are great!
Sounds great! Thanks for reminding me that I need to finish my exhaust. I keep forgetting
Heck yeah, man! Thanks
Old school true dual set up! Love it
Yes sir!
Awesome all of your job on the UBTK5 ❗️
Thank you!
Blazer sounds really good.
Thank you
One of these day's I'll be able to afford some for my school bus. That would be baddass
Yea I'm getting those exact mufflers, x pipe, and I'm buying their builders kit for my C10.
Had a buddy make a transmission crossmember out of 3/4 angle iron to run 5 feet of 3" straight pipe off the headers into Cherry Bomb Salutes and 2 foot
pipe off of them, where I plan to put some turn downs right above the real axle
Sweet!
Mannnnn she sounds amazing!
Thank you!
Cue the music.... makes me dance every single time, just cant help ur self ya know?
Haha thanks for watching through the end
Sounds good 👌! I ran a venom on my LS6 big cam truck. Sounded awesome.
I bet so!
Sounds good
Thank you
Robbie, you should sell those UBT frame crossmembers. I'd consider replacing the stock one.
We're considering it!
10:01 for sound clip after install
Those sound great I should get a set for my c30 give that 454 a great note. Great content keep up the good work
Do it!
Oh I will just placed my order yesterday.
I plan on using the speed engineering shortys on my 2wd k5 build. Glad to see they have plenty of clearance. I usually would run Borla’s but those venoms have a great sound to them. How’s the drone inside the cabin?
You'll have plenty of room with SE shorties or longtubes. Great bang for the buck! And no drone. Seriously. The mufflers are loud but they do not drone.
I might get them a the new OBS. I have Spintech on my other OBS.
Very cool!
How do you like the spintechs? I've been debating between black window spintech cherry bomb and flow pros.
@@ScoobyDigites I love em. Might get black widow a try in my next OBS I'm building. Here is a clip for you:
ruclips.net/video/e0iKE9RAuRA/видео.html
Great video !! keep it up
Thank you!
looks like you could fit a cross-pipe in there (H Pipe)
Yeah, potentially, but I'm totally good with the way it's set-up.
What kind of rims are those ? And wat size
Sounds good. Who tuned your ECM?
Alex Walker of Walker Performance. He has a channel he just started on RUclips and is on Facebook and Instagram.
Man, that sounds great, nice rumble without being too loud. (my wife wishes I wasn't too loud)
Yes sir!
Those wheels man !!! What are they called ? Sounds real good so would you choose those over Flowmaster’s
Definitely bc no drone with these. The wheels are @detroitsteelwheelco Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are @continentaltire DSW06 - 265/35/22 up front and 285/35/22 in rear.
Be careful running it like that my gs400 is ran like that but has messed the bushing up in the rear. But this set up sounds wicked
Thanks! Good to know. We're pretty pumped about it.
Why no h or x pipe? The ls really responds well with the extra scavenging. Also knocks down drown.
matt vorhees you’ll see in the video, we tried to make the x pipe work but the driveshaft is occupying the same space. And since I’m bagged, the articulation needed in the driveshaft is more important than the x pipe. And these black widows are loud but they don’t drone thankfully.
Is it worth doin up a 92 GMC serria or is to new any thoughts?
Heck yes it is! The OBS trucks are hot as fire right now.
This ol boy sounds just like Dimebag Darrell lol
I’ll take that as a compliment
Sounds like it has open headers
Do you get any any annoying popping with this?
No, thank goodness.
Ok awesome thanks, really dig your Blazer👌
So is there any drone?
No, but they're loud.
@@UNITEDBYTRUCKS sweet thanks man!
How's the drone on this setup
Are those good because I would like to put me a set on my 75 big 10
I love them!
@@UNITEDBYTRUCKS nice.
Robbie did you or would you sell those Black Widows? I seen you put Borla’s on your ride.
Man, I’m going to put them on another truck! I love them. Just like the Borla’s for long trips.
Ok cool! I enjoy your videos! I’m hoping to get my Grandpa’s ‘78 C10 longbed going this year. He bought it to bring me home from the hospital, but by the time they got here from Oklahoma I was already home.
Wassup!
What's up!
Where did you find the wheels?
They are @detroitsteelwheelco Delrays 22x9 all around with 4.75” bs up front (with 1” narrower control arms) and 4” bs in rear. Tires are @continentaltire DSW06 - 265/35/22 up front and 285/35/22 in rear.
UNITED BY TRUCKS rim choice was perfect
Was that a legit stock 5.3? Or did it have a cam installed?
Legit bone stock Gen 4 5.3 with 140k miles. Headers and air intake only. There’s a video on the truck we pulled it from on the channel. 2011 Silverado.
Kent is fuckin awesome! I'm from Cleveland and he has done all my exhaust work!
Jw why Two and not one?
My daughter put neighbor haters on her 472” 1968 Coupe deVille....it makes some noise...
I have the race venom on my 6.0 dumped at the axle, Holy shit they are way too loud. Switching to the street venom and full length
I just ordered a set of widowmaker10s for my 85 c10!... did it make a difference dumping the pipes with an angle vs straight down?
I'm not really sure that it did but this thing is pretty loud, generally.
This might be a dumb question, but how do you guys tow a air bagged truck, i.e bags inflated or deflated?
do you drive a bagged vehicle with the bags deflated? Same concept
Do you have any rubbing issues with the wheels? Asking because i just put an order in for my 2wd k5 3/5 drop
I do not.
Is there any way I could get a United by trucks window sticker.
Sure. Please visit www.unitedbytrucks.com
Sounds good man!! I have to ask why the 250s instead of venom race or the widowmakers?? I’m trying to decide what route to go, just wanted to pick your brain on your reasoning.
Thanks!
To be honest, bc I have very sensitive ears and I drive these trucks all over the country so I wanted quiet but old school sound. Unfortunately, I did not like the 250s and now run Borla Pro XS.
10:00 you're welcome
Your rims are nice. Where can i buy me some ?
Thank you! They are Detroit Steel Wheel Delrays. Buy them directly from Detroit Steel Wheel Co.
Dam I didn’t get any extras when I bought my black widows #blackwidowmufflers
Got lucky on this one haha
Subbed!
Sweet! Thanks
Sounds amazing. Too bad you cut off the video right at the good part.
With "hour glass" weld marks, I wonder where they got the name...
So true!
Just put the venom 300 on my 07 Silverado classic and it's a 3" in and out its basically a straight through set up. Sounds great.
Heck yeah! I bet that sounds rowdy!
@@UNITEDBYTRUCKS What's crazy at idle or just cruising is not as loud as my old flowmaster but when I get on the gas it wakes up. I think the black widow just has a cleaner and crisper sound. Thanks for posting the videos.
Awesome build I think it would sound sick with 3" exhaust but still sounds good
Thanks!
The project, great the mufler work great also, but the sound on idle sucks
To each their own. I think it has a real classic idle. I’ve got more footage where the idle has been tuned etc that shows the sounds better. Video coming soon.
You should at least installed an H Pipe, it does the same thing as an X Pipe
It's all good! I like the sound and the way its set up now
I installed one venom 250 on wife’s Tran am it’s to loud
👍🏼
Those wheels are so tasty on that.
Thank you!
@@UNITEDBYTRUCKS No problem man
Why the f would you lower a K5 blazer
Hoy 24 chevroet
Is it just me or does it sound like a cummins
So I'm stuck between the 2 mini monsters. I put a pair or angry housewife's on my v6 which wasn't anything too special but it's pretty loud. I have an 81 GMC k2500 with the 350 in it and I want to know which has overall best sound and volume...the angry housewife's or the neighbor haters. Let me know soon please cuz the cam I got in it ALLREADY sounds better then sex on the beach
This is my first set of Black Widows, but Rocky has neighbor haters and I love them .
It needs to be outside
Sounds like a pop can muffler.
This exhaust sounds like a beat up old hillbilly truck that lost its mufflers on a dirt road while driving over to their cousins/wife's house.
Haha very descriptive
Aaaaand no rev...
Sound absolutely horrible. Like a old John deere tractor on its last leg
Sorry guys... Typical crush tube muffler shop job... Noisy, but no power
Sounds like shitty straight exhaust
does not sounds any better