I’m glad you made a Saya for your Ninjato because I usually don’t see you make other Sayas or Scabbards for your other swords, so I’m glad to see you’re making one now. 👍
Whoa! Jumbo is a very cool Saya, you are a great fellow! By the way, I understand that it may be impossible or at least very difficult and cannot be done because you do not have a resource! But if it were possible, it would be interesting to see how you would make a Scimitar!
By the way...I also use purchased metal fittings. So much cheaper and easier. (I only make the tsuba, sepas, and habaki. The rest of the fittings I buy.) I don't know why people spend more money and time on the fittings when they're literally cheaper and easier purchased in bulk.
Jaster Rogue: Desert Seeker (Rogue Galaxy) Riku: Keyblade Way to Dawn (kingdom hearts 2) Dai: Dai's Sword (Dragon Quest Dai no Daibouken) if you can't make everyone on the list just do one or two on the list. I thank you and your team very much I wish you much success and great achievements
You don't often see handachi fittings on ninja style swords, but there is one commercially sold one that does kinda look like it. The Iga Ninjato by Hanwei if you care to see. The "dotted effect" you applied is called stippling. For koshirae, it's called nanako. You see it on many higher end pieces. I like it on a mokko tsuba with a solid outside border. Was the saya tapered to get the kurikata to sit still, or did you just fasten it down when you felt it was in the right spot? I have never seen a kurikata fail like that before, maybe it was just badly made. One of my katana is over 20 yrs old and isn't like that. The other one is maybe about 5 and looks brand new. Sageo looks just like the one on my 5. I hate tying them so much. How do you determine how much wood to remove inside the saya? Keep testing the fit as you go or did you math it out?
Mainly for the drying time. I can work on a piece faster, without having to wait for a full cure. I must say too that I have had really good results with clear epoxy on wood.
You guys are amazing with the forging I love every blade you guys have made 🔥🔥🔥💰💰 maybe you guys can make Lord shimura's blade from ghost of Tsushima next time
not bad really not bad a scabbard for the Ninjato there are 24 other katanas that also need a scabbard what will be the next katana first there is that of Afro Samurai mugens's sword jins's Katana fuu's tanto Samurai Champloo I saw what you did Zoro's swords but you forgot two others Sandai Kitetsu and Yubashiri that's why Zoro had 5 sabers I can not wait to see them😁😇👍👁
I want Michikatsu's Nichirin You can't find it in the internet but this is how I imagine it: Indigo grey Ito wrap, Light purple kashira, A Gold tsuba, And a Purple Blade
I’m glad you made a Saya for your Ninjato because I usually don’t see you make other Sayas or Scabbards for your other swords, so I’m glad to see you’re making one now. 👍
Awesome sword as always
Thank you!
@@JumboRadishhi there.Do you make swords for other people?I would love a Ninja-to like the one you made for my collection..
@@JumboRadishare they for sale?
*EXCELLENT!!!*
You got serious skills! I love the improvising with certain styles but still making it so smooth. The leather really was a nice touch.
Throw back to one of your first builds!
Ha te revoilà. Tu nous a manqué. Merci pour ton partage c'est un vrai plaisir
Good Video 👍🏻
Don't Forget Ryu Hayabusa's Katana From Ninja Gaiden Series.
Awesome!!... Sword
Honestly It’s been hard for me to keep up but everyone of your builds always looks great!
Thanks.
Mini katana should hire this guy.
Whoa! Jumbo is a very cool Saya, you are a great fellow! By the way, I understand that it may be impossible or at least very difficult and cannot be done because you do not have a resource! But if it were possible, it would be interesting to see how you would make a Scimitar!
Thank you! I do plan on making scimitars at some point too :)
Yeah that’s sword I would like to see him make 💯
please jumbo radish please do a video for tips for beginner black Smith cuz I always wanted to do blacksmithing but I don't know where to start!!!!
That sheath looks awesome. 👍👍
By the way...I also use purchased metal fittings. So much cheaper and easier. (I only make the tsuba, sepas, and habaki. The rest of the fittings I buy.)
I don't know why people spend more money and time on the fittings when they're literally cheaper and easier purchased in bulk.
I agree! The Tsuba is always fun to make, but the others fitting are pretty generic and don't really need a personal touch.
Katana making kanae plis 🙏🙏
i agree
woah cool sword
Jaster Rogue: Desert Seeker (Rogue Galaxy)
Riku: Keyblade Way to Dawn (kingdom hearts 2)
Dai: Dai's Sword (Dragon Quest Dai no Daibouken)
if you can't make everyone on the list just do one or two on the list. I thank you and your team very much I wish you much success and great achievements
Good shizz
You don't often see handachi fittings on ninja style swords, but there is one commercially sold one that does kinda look like it. The Iga Ninjato by Hanwei if you care to see. The "dotted effect" you applied is called stippling. For koshirae, it's called nanako. You see it on many higher end pieces. I like it on a mokko tsuba with a solid outside border. Was the saya tapered to get the kurikata to sit still, or did you just fasten it down when you felt it was in the right spot? I have never seen a kurikata fail like that before, maybe it was just badly made. One of my katana is over 20 yrs old and isn't like that. The other one is maybe about 5 and looks brand new. Sageo looks just like the one on my 5. I hate tying them so much. How do you determine how much wood to remove inside the saya? Keep testing the fit as you go or did you math it out?
Bro, all your stuff is supercool but I love your Ninjato Wsords.
Why do you use epoxy to stick the wood of the saya instead of regular wood glue? I thought wood glue was stronger on wood than epoxy
Mainly for the drying time. I can work on a piece faster, without having to wait for a full cure. I must say too that I have had really good results with clear epoxy on wood.
@@JumboRadish ok, thatks for the answer
Can you try to make gyomeis axe?
You can do Artorias greatsword next
Making a sandai kitetsu. Pls
How can one get this particular sword from this maker, I like him and his dedication to keep the samurai spirit tradition art to this day..❤
Can you make İnosuke sword please
I already have :) His was actually the first Demon Slayer swords I made.
@@JumboRadish thsnk you i haven't seen your vid. Inosuke is one of my favorite slayers
looks better than paul chens koga ninjato sword and siya great job
Epic, can you make Death's sickles from Puss in boots the last wish next?
You guys are amazing with the forging I love every blade you guys have made 🔥🔥🔥💰💰 maybe you guys can make Lord shimura's blade from ghost of Tsushima next time
You changed the fittings on the ninjato to match the saya right?
Can you make rimuru tempest katana??
Es una muy buena katana 😮
Yo are u planning on the stone hashiras flail and axe? Btw love ur vids ❤
The ninja-to video was the first video I watched from you and I absolutely loved it! Subscribed after thar video. Awesome build for the ninja-to!
Thank you!
oh a ninja weapon
Yuta okkotsu katana
Can you make ace please ( Roger's sword)
Make Brook sword pls
Amazing vid as always! If it’s ok, I have a request? Can you pls make a custom water breathing katana?
Vergil yamato?
😮😮😮
👍😎
You could do the sickles of death, from the movie Puss in Boots
Can you make sabitos sword
not bad really not bad a scabbard for the Ninjato there are 24 other katanas that also need a scabbard what will be the next katana first there is that of Afro Samurai mugens's sword jins's Katana fuu's tanto Samurai Champloo I saw what you did Zoro's swords but you forgot two others Sandai Kitetsu and Yubashiri that's why Zoro had 5 sabers I can not wait to see them😁😇👍👁
Can you do Kanae's Blade please.
i agree
I remember asking this a while ago but, could you make the sword of the gundam astray red frame (gerbera straight) it’s a very cool katana design
Lostvayne de meliodas🐉🐉🐉🐉
Can buy this one from u guys?
if only they allowed us to buy ;-;
making nichirin Urokodaki Sakongi. Please, Jumbo Radish!
Ryu Hayabusa's Dragon sword, Vergil's Yamato sword, or Yamamoto's Ryujin Jakka sword.
Wait, where's the sword video??
Forge the nichirin sword of Gyomei Himejima from Demon Slayer
Just wait til he makes Gyomei Himejima’s weapon
Great work can you make ame no habakiri
I challenge you to make a totally improvised katana for yourself
That saya is perfect. But I don't like the kashira on the sword.
This might be hard to make but can you make Gilgamesh sword from fate/stay
It would look kppl if you made the sword handling leather to match. 👌
I wanna see if you can make Nagoriyuki’s katana from guilty gear
I wanted to see you forging the monogatari sword called Kokorowatari
I want Michikatsu's Nichirin
You can't find it in the internet but this is how I imagine it:
Indigo grey Ito wrap,
Light purple kashira,
A Gold tsuba,
And a Purple Blade
Don't Forget Katanas, Knifes, Sword And Other Weapons From Damascus Steel.
Hello. Haven't seen anything from you in a good while. I hope you're doing well.
I'm on hiatus for now, I will make more videos in the future :)
Pls make kaigaku's katana from demon slayer thank you
Please, can you make the Harusame katana, from Shaman King? It will make me very happy.
Sword Valtryek😃
Do kaigaku and ty🙏🤗
I actually have one but it made from like this really strong plastic
I'll give you options, urokodaki,
sabito,makomo demon slayer
I like the every sword you make. Can I have one from you🙏🙏🙏😇 I love it much. Please 🙏🙏🙏
Hey, do you think you can make the sword of zoro sandai kitetsu yes please
Brother, I am waiting for *GYOMEI*
Can you make Meliodas broken dragon handle or lostvayne?
Could you make the Coral Saber from the game Oceanhorn:Monster of the Uncharted Seas
What's the name of the when me closed the sword!! AHHHH I CAN'T EXPLAIN
I want you to make a habakiri sword.
Making yoru mihawk
Do you ever sell your swords?
Made a ninja tachi sword
Day 6 of asking them to make Brooks cane sword
Please make a Yone's katana from League of Legends
hello, please tell me what kind of steel do you use?
I use 1095 high carbon steel
@@JumboRadish thanks
Where'd Captain Commander's Bankai vid go?
Sorry, doing some final edits to it! It will be up tomorrow
Do Gyomei's Blade pls
Please make the Yamato Katana from Devil May Cry 5
Plz make kiba the lightning blade
Please make the blue and black blade katana
Why did you stoped making sowrds😢
Sandai kitetsu (☆_☆)
why don't you sell? Hahaha I would like to buy
Dark blade mihawk
Pls make brooks cane sword from one piece
Sir Indian price bolo
Make the katana from 47 ronin
Ehi… have you ever Made a metà la saya?
ertugul sword please
Making sword anbu anime naruto please