Cross Sections from Contours in AutoCAD (Using SW DTM)
HTML-код
- Опубликовано: 22 авг 2024
- SW DTM: softwel.com.np/...
STEPS:
1)Open your contour in AutoCAD.
2)Check the layer of your contours.
3)Draw the alignment in different layer or import it.
4)Open SWDTM.
5)Process the contour. While processing, make sure that you choose the correct layer used for contours for processing.
6)Triangulate.
7)Click on 'X-section' and then on sections by DTM.
8)Enter the values of Starting Chainage, X-section interval and partial distances depending upon your need.
9)Give a suitable name for the csv file and save it. This file will contain section details which you can open and check as well.
10)Select the alignment nearer to the starting chainage.
11)Click on X-section in SWDTM and then on draw L-section/X-sections.
12)Adjust the scales, rows, etc.
13)Click on execute and then select the previously saved csv file.
14)Draw all or draw the sections you want from the options.
Thank you for your lovely and informative Videos❤️
Thank you for your good information
thank you , needed this much
Thank You so much
Really appreciate your efforts 🤗
Ic mn 1 feet 10 inch ka show ho rhaa ha
Jab cross section swdtm say plot hota hai uska scale mai nahi aata kyo