Thank you very much for taking your time to make these video's and share them with us. I ordered the SC4 and the AM5 yesterday. Can't wait for them to get here to start practicing with them. Your video's were the inspiration for myself to spend the bucks and try them out. Your really a huge help and Thanks again for doing this. Mark
appreciate the kind words! just uploaded another video on the TOY43AT toyota lishi. Its going to be live tomorrow. any questions or anything drop me an email. theboredlockpicker@gmail.com
So i decoded a mazda m3 but wen i would cut the key it only work on the door cilynder but not the ignition so idk if i was using the wrong setting on the dolphin or wat?
I have an 08 Mazda 3 all keys lost I’m using the xc condor mini plus I decoded the lock with the lishi got the 2 cuts from instacode and the key didn’t work so I disassembled the cylinder and the numbers stamped on the wafers are the same wut I got on the lishi but the wafers are not sitting flush almost if it’s the wrong cut have u ran into this problem?
@@BoredLockpicker yes I’m using the shoulder stop I calibrated my machine but 3 wafers are off this should of been an in and out job and I’ve been dealing with it all day
Thank you very much for taking your time to make these video's and share them with us. I ordered the SC4 and the AM5 yesterday. Can't wait for them to get here to start practicing with them. Your video's were the inspiration for myself to spend the bucks and try them out. Your really a huge help and Thanks again for doing this.
Mark
appreciate the kind words! just uploaded another video on the TOY43AT toyota lishi. Its going to be live tomorrow. any questions or anything drop me an email. theboredlockpicker@gmail.com
Really nicely done! Awesome tool. I stopped being friends with that robot 🤖
me too lol
Nice job! Love the Lishis & always like seeing these car locks picked & decoded. Thanks for sharing! Hope you have a great week, man.😃👍🏼🔐
thank you. you too!
Gracias brother
De nada
Hi ! How do you find the missing bits 1 and 2 to be able to use the key in the ignition?
use a code fill program
Do i need both lishi, i mean for the door lock and ignition? Or do you just need the ignition one?
The ignition doesn’t read well in the door…..sticks out to far
Thanks, and is this for the maz24r keyblank?
Hey man, I ordered one of them for my 95 Miata, but the decoder doesn’t fit into the lock all the way… am I doin something wrong?
It should fit as long there’s nothing broke off on the lock and the wafers are moving freely. Does a key blank go in?
The door has 5 pins right? Ignition 8
8 wafers in the door 10 in the ignition.
@@BoredLockpicker Thanks, just made the last 2 by progression, greetings from Mexico!
Hi. 👍
will open the door maz 24 lgn?
No. It’s only got 8 spaces for the door
Wat bitting do you enter on the dolphin for a mz31 ?
I don’t understand the question
So i decoded a mazda m3 but wen i would cut the key it only work on the door cilynder but not the ignition so idk if i was using the wrong setting on the dolphin or wat?
How did you figure out positions one and two?
What difference between MAZ24 and MAZ24R?
Sanks
I dont think there is a difference. I could be wrong but i"m pretty sure the Maz24R is the silca blank
Light or hard tension?
as heavy tension as the lock will allow. same as all lock picking
I have an 08 Mazda 3 all keys lost I’m using the xc condor mini plus I decoded the lock with the lishi got the 2 cuts from instacode and the key didn’t work so I disassembled the cylinder and the numbers stamped on the wafers are the same wut I got on the lishi but the wafers are not sitting flush almost if it’s the wrong cut have u ran into this problem?
I haven’t had that issue no
Are you using the shoulder stop so it’s aligned correctly?
@@BoredLockpicker yes I’m using the shoulder stop I calibrated my machine but 3 wafers are off this should of been an in and out job and I’ve been dealing with it all day
@@335135 I do hate mazda
@@335135 the push starts anyway. Try cutting the key with your blitz
Which last cut are missing mate?
You have a Link to buy the tool
door on mazda is usually missing cuts 1 and 2. to buy lishi tools you need to find original lishi website and find a dealer in your region