I could kiss you. Thank you so much. I knew there were sensors but the descriptions I had before made it seem they were far lower than they are. Saved me buying a new machine! 😊
Have one of these. I've cleaned and maintained it well. I now have an issue where I get a stupidly small dose of coffee and and the rest of the coffee and water go into the tray/waste. Can you advise or help. I've run descale. 😢
Hello, my machine will not enter descaling mode? I followed the instructions and held the button for 6 sec while it is off and it just turns on but does not flash. Do you have any idea why this happens and how to fix? Thanks
Hi, very clear video! I'm facing another problem however, when closing the slider on top, it doesn't register it is closed, so it refuses to make any coffee (says in the app the slider is open, while it's closed). When the machine is off, it also doesn't turn on automatically after opening the slider like it used to. So it seems there is also some sensor dirty or broken, do you know where it is located and maybe how to fix it?
Hello my friend, i have one of these machines but i'm facing an error which i can't find anything about online... Whats happens is that when i put a capsule in it right before the mechanism closes to start the process it gives an error (maintenance led blinking fast and constinuously) and it spills the capsule out, the error wont go off unless i unplug the machine from mains, looks like it senses that something is blocking the gears and/or forcing the motor but there is no such sensor in this part (motor voltage drop sensing maybe?). I'm a repair technician from Brazil but this thing is new to me, already checked the capsule/tray infrared sensor and i'snt blocked, do you have seen anything like that before? i'm running out off hope right now 😅
@@meghanbennett2962 hi my friend, unfortunately i didn't found any solution, the machine is mine so i had to hemade the board using esp microcontroller and custom code/electronics, the good part is that now it behaves exactly as i want and if i'm not happy about anything i can change the code whenever i want! it is also working with local wifi so i can control it using my phone. I have some experience with arduino, progaming and, of course, electronics but it was not easy i have to say, don't recommend doing this for a customer or if you are not used to electronics/progaming...
Thank you so much for your advice, we've managed to fix the nespresso coffee machine, thank you
I could kiss you. Thank you so much. I knew there were sensors but the descriptions I had before made it seem they were far lower than they are. Saved me buying a new machine! 😊
Thanks a lot that was driving me crazy!
Got to say thank you. My expert has been running solidly for last 10 years no issues. Started giving me issues last few days. This helped!
Thanks! Similar problem with mine. Your video helped me to fix the problem.
Have one of these. I've cleaned and maintained it well. I now have an issue where I get a stupidly small dose of coffee and and the rest of the coffee and water go into the tray/waste. Can you advise or help. I've run descale. 😢
Did you find an answer? Having the same issue.
I had same. After factory settings it was solved
Thank You, amazing, detailed video! 🔥
Hello, my machine will not enter descaling mode? I followed the instructions and held the button for 6 sec while it is off and it just turns on but does not flash. Do you have any idea why this happens and how to fix? Thanks
Great video very helpful! Do you also have videos on how to replace parts?
Thanks a lot , I fix my machine because I was so upset when it’s stop working but now all good , appreciate!
Legend. Got us going again
Hi, very clear video! I'm facing another problem however, when closing the slider on top, it doesn't register it is closed, so it refuses to make any coffee (says in the app the slider is open, while it's closed). When the machine is off, it also doesn't turn on automatically after opening the slider like it used to. So it seems there is also some sensor dirty or broken, do you know where it is located and maybe how to fix it?
Thanks it was a big help !
where can i get parts for this machine, knob circuit board is broken, it is stuck on small cup and only blinks, and wont change when spining
Have the same problem, blinking orange light, can't go out from descale mode
Hi. Do you know the reason if the blue light does not light up? Thank you.
Hello my friend, i have one of these machines but i'm facing an error which i can't find anything about online...
Whats happens is that when i put a capsule in it right before the mechanism closes to start the process it gives an error (maintenance led blinking fast and constinuously) and it spills the capsule out, the error wont go off unless i unplug the machine from mains, looks like it senses that something is blocking the gears and/or forcing the motor but there is no such sensor in this part (motor voltage drop sensing maybe?).
I'm a repair technician from Brazil but this thing is new to me, already checked the capsule/tray infrared sensor and i'snt blocked, do you have seen anything like that before? i'm running out off hope right now 😅
Did you figure this out? I’m having the same issue. 😢
@@meghanbennett2962 hi my friend, unfortunately i didn't found any solution, the machine is mine so i had to hemade the board using esp microcontroller and custom code/electronics, the good part is that now it behaves exactly as i want and if i'm not happy about anything i can change the code whenever i want! it is also working with local wifi so i can control it using my phone. I have some experience with arduino, progaming and, of course, electronics but it was not easy i have to say, don't recommend doing this for a customer or if you are not used to electronics/progaming...
👌🏻