Damn. Nice work orienting that grain to sweep right through the lid cut. Sepele is a fantastic wood to work with and you did a bad ass job showcasing its beauty
That trick with the wipe-on poly is amazing. I have used it a few times this week to fix some gaps in dovetails that I cut. It is not as messy as the saw dust and glue method and works well with contrasting colored woods. Thanks for the tip!!!
I know others have commented on the poly trick, but I have to say that it's the first time I have ever seen this as well, and it's definitely how I intend to fill gaps in the future for projects I intend to poly like this. Beautiful keepsake box too btw.
Beautiful work man. That tip is very clever and have honestly never heard it before. I’m so glad I can be a part of a community with so many skilled people like yourself. Great project Dave.
Thanks! I love being part of this community also. I learn something new all the time. You guys are inspiring me to do some metal work and I'm even making a leather wallet that I learned about from watching RUclips tutorials.
I agree with Sammy. The slurry you make with the wipe on poly filled in the gaps perfectly. I’ve always tried to use the sawdust/glue trick, but was never fully satisfied with the end result. Thanks for the info. First time viewer... really enjoyed your presentation and comments throughout your video.
@@jmherbst87 . No issues with wood movement. This would rarely be a problem with good kiln dried hardwood on a piece only a few inches wide. I would use a different method of attaching woods in different grain directions on large panels and table tops though
Thanks! I like that method of filling gaps. Sometimes I apply some poly or boiled linseed oil and sand the surface on small boxes just to fill the pores and get a smoother finish.
I just came across your video. I've made the same box only a bit larger and just made from a quality 1x12 pine board from HD. Actually I've made 3 of them for my grandkids 2nd Xmas's. Main difference is that I used a piano hinge for the lid and installed a spring-loaded hinge on the inside so the lid would stay open and the kids wouldn't smash their fingers closing the box.
I like the design and execution. Clean, simple and perfect proportion. I especially like your choice of timber and the way you grain matched. Really nice. I am going to make this box but I think I'll put a lip inside the top edge of the bottom, flock the inside and put a mirror inside the lid. I need a special gift for one of my sisters. You box joint box is it. The slurry technique you used was called filled grain. In my first career I was a gunsmith. I don't how it is now but when I was smithing most gunsmiths were generalists, you worked on what was in front of you, metal or wood. I liked stock making but stock making was then at least, the least financially rewarding for the time you put in to it. (The most financialy rewarding was changing lower barrel hammer springs in superposed shotguns). Back then poly finish wasn't widely used, it was fairly new. The times I used what was available it often fell out over time. I would think that would still be a problem with gun stocks, I don't know about pieces that aren't subject to shock. I got the best result when I sanded to 320, de-whiskerd with alcohol and 400, wet sanded with tung oil then let it dry, dry, dry. Then wet sanded with the grain with 600. By that time the stock would be dead smooth. Then bowling alley wax to buff and polish. That's the finish I'll use when I build the box. Thanks for the inspiration.
Thanks for the feedback! The additions you plan to make sound great! It's funny you mentioned the slurry trick as a grain filler for rifle stocks. It must be a common method for smiths. A friend of mine uses true oil or linseed oil and sand paper to fill the grain on the stocks he restores
@@TwistedWorkshop77 I don't know how I dropped it out but what we're talking about is a "gun stock" finish. Grain filled and dead smooth. You can get a faux gun stock finish with modern plastic finish, sand it, paint or spray the finish on, most of them are self leveling, at the most a light sanding with some fine paper, make sure you don't sand all the way back down to the timber and apply another coat. It looks nice, smooth, shiney and fairly fast. But that finish has depth to it and it's hard to do a nice job of repairing dings and hand worn spots. You can look at it and SEE the finish is laying "on" the timber. A gun stock finish, smooth, shiney and all looks like it IS the wood.
Been woodworking for a while now and that's the first time I've seen the poly/slurry trick. Thanks for the tip! Amazing what this community can accomplish! Well done, sir!
Thanks for that poly tip, and now I'll share one with you. When you go to separate the lid, don't cut all the way through. Cut almost all the way, but leave just a thin, thin, see-through layer of material. This will hold the lid in place without fooling with all those spacers. Finish up separating the lid with a coping saw or any kind of trimming saw.
Dude, thank you for making this out of a chunk of 2×4. I've been stressing over making a finger joint jig for a while, and all these videos all over the place have these supposedly simple jigs that require either hardware I don't have or skill I don't have. I appreciate this video more than you know.
Great video and absolutely priceless tip. I’ve never heard of that technique which sounds so much better than using the glue and saw dust. Thanks again m
Nice project, I made boxes for my boys when they were young. They still have them at ages 30 and 28. And that’s a great tip with the alternative to glue and sawdust, especially with end grains that would soak up glue like a sponge.
I agree with your liking for Gen Finishes Satin. They have changed the formula in recent years. The older stuff was thicker with an additive that would yellow faster and leave a more velvet finish. Making some finger box joint boxes now and will post my steps with 1/4" joints and knife kerf hinges. You can water down some filler and do a single swipe for the loose fit fingers and then sand and you may have to tint the filler stuff to match the wood color. You can buy the colorant from food processing companies. You have the MO accent or maybe TN?
I have really good luck with GF products. I have been their milk paints with good results too. It's not real milk paint but it has that flat smooth look to it. Good to know about the coloring. I will have to try it. And check out you video.
Love the wipe on poly tip. I've tried using CA glue and wood glue with sawdust and have never gotten a good color match. Thanks for sharing! I'm using this tip in one of my videos. I'll be sure to link to your video when I do.
From a 68 year-old woodworker, Thanks for sharing! I guess you can teach an old dog new tricks! Loved your video!
Thank you!
i love that poly sanding trick to hide the gaps !!!
Thanks!
Yeah! Sweet! Good trick
Going to try that one today!
Its better than glue cuz glue won't take stains well!!
Yes, I do too; and I’m a long term glue and sawdust guy.
Beats sawdust and glue ANY DAY- thank you for sharing.
Yay! Someone else that uses the fist mallet
Your work is second to none may God continue to bless you
easily the simplest jig ive seen that make the most amount of sense with the least amount of time. worth a sub.
Thanks so much for the great tip on the box joints. Tried it today. Bingo.
Good job
Nice job! Great suggestion with filling the gaps. 👍
Thanks!
thanks for the gap hack. Much easier than sawdust and glue.
Thanks!
It's a beautiful box with phillips screws.
It would have looked good with slotted screws all clocked the same way for sure!
nice box.
Nicely done 👍 🇬🇧
Duuude. That wipe-on-poly hack is gold! Also, the spacers when cutting the lid is something that I fell is very important. Thanks!
Thanks!
Simply beautiful!
@@EricRedbear thank you!
Damn. Nice work orienting that grain to sweep right through the lid cut. Sepele is a fantastic wood to work with and you did a bad ass job showcasing its beauty
Thank you! Sapele may be my favorite. Its affordable around me, easy to work and looks great
nice hack on filling the box joint gaps.
Thanks!
the poly / sanding hack alone was worth watching this video. I've struggled with this for so many years but missed such an obvious fix.
Thanks! It sure has helped me a few times with box joints and dovetails
That trick with the wipe-on poly is amazing. I have used it a few times this week to fix some gaps in dovetails that I cut. It is not as messy as the saw dust and glue method and works well with contrasting colored woods. Thanks for the tip!!!
That's great. I'm glad it worked for you!
is the poly water or oil base?
I use water-based poly.
just what I was looking for in a box tutorial
@@xisotopex awesome! Thanks!!
great project
Fine craftmanship
Nice box. And good video too.
I love sapele.
Nice job and really enjoyed the joint filling hack! Thanks for sharing.
Thanks!
I know others have commented on the poly trick, but I have to say that it's the first time I have ever seen this as well, and it's definitely how I intend to fill gaps in the future for projects I intend to poly like this. Beautiful keepsake box too btw.
Thanks
Great poly sanding trick! thanks for sharing and helping me up my woodworking quality.
excellent job
Well done very good video
WONDERFUL! Thank you for sharing your skills and techniques with us!
Thank you
Outstanding work. I particularly like the gap hack with the poly and sanding dust. I'll use it today on another project. Thank you again. Great video.
Thank you!
The wipe on poly slurry trick was enough to make me a new subscriber! Awesome idea for those "well CRAP!" moments on a build like this.
Thanks! I tend to have a few of those "well crap" moments!
Same here! It just never occurred to me.
Beautiful work man. That tip is very clever and have honestly never heard it before. I’m so glad I can be a part of a community with so many skilled people like yourself. Great project Dave.
Thanks! I love being part of this community also. I learn something new all the time. You guys are inspiring me to do some metal work and I'm even making a leather wallet that I learned about from watching RUclips tutorials.
Nice job.
Great job what you did in this astonishing box you’ve made. Really I loved it.. peace
Thank you!
@@TwistedWorkshop77 you are welcome brother
Tried the finger joint hack with water based poly. Worked amazing
Awesome! Glad it worked
I agree with Sammy. The slurry you make with the wipe on poly filled in the gaps perfectly. I’ve always tried to use the sawdust/glue trick, but was never fully satisfied with the end result. Thanks for the info. First time viewer... really enjoyed your presentation and comments throughout your video.
Thanks for the feedback! If the gaps are relatively small, the slurry works well. It's a good grain filler on woods like mahogany
Beautiful piece. I love working with sapele
Thanks! Yea it smells good and is easy to work!
Twisted Woodshop what are the dimensions/ cutting directions for the box
I was looking for a way to do the box lid and you showed exactly what I was looking for. Thanks.
That’s great! Thanks for watching and good luck with your buid
Any issues with wood movement for the lid built like this?
@@jmherbst87 . No issues with wood movement. This would rarely be a problem with good kiln dried hardwood on a piece only a few inches wide. I would use a different method of attaching woods in different grain directions on large panels and table tops though
Ok good to know, thanks!
box looks awesome
Nice Job , you kept the FJ's equal spaced ! Love the tip on the sanding to fill in the small gaps in the FJ's Thanks Again
Thanks! I like that method of filling gaps. Sometimes I apply some poly or boiled linseed oil and sand the surface on small boxes just to fill the pores and get a smoother finish.
Twisted Woodshop mmmmmmmm
Beautiful box. I love the grain on the front.
Thanks!
Beautiful piece brother. Love working with sapele.
Looks great!!
Thanks for sharing
👍😉
Yeah, the poly sanding trick was great. Definitely going to start using that.
Your gap filling method is amazing. That's the first time I've seen that. Thank you. I'll be using this on my next box joints
Awesome! It's a good trick
You can also make a sawdust slurry with Elmer's clear glue. Just add some to the gaps and sand the same way.
I've never used clear glue before. I will give it a shot. Thanks
@@TwistedWorkshop77 Np
Outstanding.
Thanks!
I just came across your video. I've made the same box only a bit larger and just made from a quality 1x12 pine board from HD. Actually I've made 3 of them for my grandkids 2nd Xmas's. Main difference is that I used a piano hinge for the lid and installed a spring-loaded hinge on the inside so the lid would stay open and the kids wouldn't smash their fingers closing the box.
Nice. I like the spring loaded hinge idea
Great job
Thank you
I like the design and execution. Clean, simple and perfect proportion. I especially like your choice of timber and the way you grain matched. Really nice. I am going to make this box but I think I'll put a lip inside the top edge of the bottom, flock the inside and put a mirror inside the lid. I need a special gift for one of my sisters. You box joint box is it. The slurry technique you used was called filled grain. In my first career I was a gunsmith. I don't how it is now but when I was smithing most gunsmiths were generalists, you worked on what was in front of you, metal or wood. I liked stock making but stock making was then at least, the least financially rewarding for the time you put in to it. (The most financialy rewarding was changing lower barrel hammer springs in superposed shotguns). Back then poly finish wasn't widely used, it was fairly new. The times I used what was available it often fell out over time. I would think that would still be a problem with gun stocks, I don't know about pieces that aren't subject to shock. I got the best result when I sanded to 320, de-whiskerd with alcohol and 400, wet sanded with tung oil then let it dry, dry, dry. Then wet sanded with the grain with 600. By that time the stock would be dead smooth. Then bowling alley wax to buff and polish. That's the finish I'll use when I build the box. Thanks for the inspiration.
Thanks for the feedback! The additions you plan to make sound great! It's funny you mentioned the slurry trick as a grain filler for rifle stocks. It must be a common method for smiths. A friend of mine uses true oil or linseed oil and sand paper to fill the grain on the stocks he restores
@@TwistedWorkshop77 I don't know how I dropped it out but what we're talking about is a "gun stock" finish. Grain filled and dead smooth. You can get a faux gun stock finish with modern plastic finish, sand it, paint or spray the finish on, most of them are self leveling, at the most a light sanding with some fine paper, make sure you don't sand all the way back down to the timber and apply another coat. It looks nice, smooth, shiney and fairly fast. But that finish has depth to it and it's hard to do a nice job of repairing dings and hand worn spots. You can look at it and SEE the finish is laying "on" the timber. A gun stock finish, smooth, shiney and all looks like it IS the wood.
Great video! Thank you!
looks lovely
Thank you
Great video, uncluttered and easy to follow.
Going to give this a try.
Good job man!
Great video. Thanks
Thanks!
Beautiful work. Well done.
Been woodworking for a while now and that's the first time I've seen the poly/slurry trick. Thanks for the tip! Amazing what this community can accomplish! Well done, sir!
Thanks! Just finished watching your video on the gun rack you made. Good stuff
what a good Dad !!!!
Thanks!
Awesome job and your box turned out fantastic.
Thanks!
i enjoyed this far more than i thought i was. great job producing this video.
Thank you!
Nice work. Some great tips and easy to follow instructions.
Thank you
Gorgeous box. As a brand new woodworker, this project is inspiring and the techniques are very helpful!
Agreed. This might be next on my to do list
Beautiful
Thank you
Truly beautiful work of art! Well done!
Thank you!
Dude, that box is perfect. It's not the most ornate, but the grain, finish and proportions are just right and I love the hardware. Subscribed.
Thanks! I'm saving ornate for a humidor I plan on making soon
Thanks for that poly tip, and now I'll share one with you.
When you go to separate the lid, don't cut all the way through. Cut almost all the way, but leave just a thin, thin, see-through layer of material. This will hold the lid in place without fooling with all those spacers. Finish up separating the lid with a coping saw or any kind of trimming saw.
Thanks. I am going to make a humidor in the next couple months and will give this a try!
Thats a beautiful looking box
Good tip with the sanding and wipe-on poly... (I) enjoyed the video!
Thank you
Dude, thank you for making this out of a chunk of 2×4. I've been stressing over making a finger joint jig for a while, and all these videos all over the place have these supposedly simple jigs that require either hardware I don't have or skill I don't have. I appreciate this video more than you know.
Awesome! I dont want to spend the little bit of time I have making jigs. The simpler, the better!
Really nice explanation and I love the trick with the sanding to fill the voids.....I gotta try that
Thanks!
Very nice!
Oh man i love sepele wood. what a beautiful box. well done sir
Thanks!
Graet video and tips!
Great video
Thank you
Awesome video!! Nice and clear. Great tips.
Thank you!
Very nice! I'm about to start a very similar piece. Glad I saw this before I start on it!
Thanks! Good luck with your project
Simply amazing. Any chance that there are plans for this box?
Great video and absolutely priceless tip. I’ve never heard of that technique which sounds so much better than using the glue and saw dust. Thanks again m
Thanks. That gap filling method works well!
Excelente!!
Bravo sir.
Thanks!
Beautiful Box. Fantastic video, Great narration.
Thanks!
Good suggestions.. Nice job.
Thanks!
Very nice job on the finish. It really brings out the grain. Nice job on all of it.
Thanks!
Great tips and awesome video!
Thank you
Beautiful box.
Very nice video - Thank you.
Thanks
Good stuff. Like that poly tip. I always use saw dust with glue but it messy
Thanks!
Thats a beautiful box! Well made!
Thanks!
Nice project, I made boxes for my boys when they were young. They still have them at ages 30 and 28. And that’s a great tip with the alternative to glue and sawdust, especially with end grains that would soak up glue like a sponge.
I agree with your liking for Gen Finishes Satin. They have changed the formula in recent years. The older stuff was thicker with an additive that
would yellow faster and leave a more velvet finish. Making some finger box joint boxes now and will post my steps with 1/4" joints and knife
kerf hinges. You can water down some filler and do a single swipe for the loose fit fingers and then sand and you may have to tint the filler stuff to match the wood color. You can buy the colorant from food processing companies. You have the MO accent or maybe TN?
I have really good luck with GF products. I have been their milk paints with good results too. It's not real milk paint but it has that flat smooth look to it.
Good to know about the coloring. I will have to try it. And check out you video.
I dig it.
great job i could not do better my self
Love the wipe on poly tip. I've tried using CA glue and wood glue with sawdust and have never gotten a good color match. Thanks for sharing! I'm using this tip in one of my videos. I'll be sure to link to your video when I do.
Thanks! Good luck with your project
Beautiful finish. Great work on the jig to make the finger joints. Looks like some of us novices can even try it. Great Job! Thanks for sharing.
Simple, beautiful and elegant. Well done, and that poly trick is fantastic!! Definitely going to try that.
Thanks!
Man that was great. Awesome tips and great looking project.
Thanks! I'm glad you enjoyed it
10 points for the poly trick!!!
That is awesome 😎I love Sapele, it’s always got amazing grain!
Thanks! It's easy to work with too
Twisted Woodshop I’m definitely going to pick some up on my next run to the lumberyard
wow beautifull
Thanks!
Outstanding Video. I always learn something watching your videos!!
Thanks. I'm glad you liked it