A Nice Pair 👍 Mf 399 engine back on 👍
HTML-код
- Опубликовано: 15 сен 2024
- MF 399 engine back on 👍 MF 1250 clean up for a show and a rant 🤦♂️👍
Thanks for watching
Email ferguson1200@btinternet.com
#massey
#classictractor
#farming
#masseyferguson
#tractorrestoration
#massey1200
#massey1250
#massey135
#fordtractor
#jcb
From time to time I get sent things from suppliers , as not to fall foul of RUclips rules , contract,ref paid sponsorship/ promotions I include #paidpromotion , unless otherwise stated I’m not currently sponsored by any one
A lot of work done there, well done. Hope everything else is ok. Rant away better out than in.
Thanks 👍 oh yea
Good job getting the 399 together, as for the manifold gaskets a main dealer really ought to sort them properly, even a stockman like me could probably do it
Cheers , yea !!! I would have but not got the time
G'day Dave and penny good 👍 job getting the 399 back together
@@frank5127 👍👍
Super stuff as always
@@johnlawless8059 cheers 👍
Missed your upload yesterday evening, but looking forward to watching this evening 👍
Internet was on super slow so didn’t get uploaded till 12.30 am this morning 🤦♂️🤦♂️
Fit a safety start switch! Long screwdriver and a tap of the hammer Will turn it no bother! Wee blob of grease on new switch and it'll be safe.
Sorted now 👍
We've all had a tight one that takes a bit of gentle easing. Good job Dave.👍
👍 done worse ! This one wasn’t to bad thankfully 👍
Great video, a nice feeling when the tractor goes back together.
@@Gearoid35 thanks 👍👍
Love the vids I knew a farmer who had a 1200 with I 5furrow plough then upgrade to a 1250 so when R going to tackle a 625 or a 525 combine and restore on of those would love to see U do one of those in the future and keep up the good work
@@trymeflyme1812 thanks , combine not my thing tbh ! Got enough tractors waiting to do 👍
Joining up can be time consuming, however. Make two guide studs from the longest lift cover bolts, cut off heads and chamfer ends, cut screwdriver slot in end. Fit prior to pushing together, easy to see if up/down, left/right adjustment needed. When close, use a screwdriver against the guide stud to run the flywheel. Alternatively, when lined up on guide studs, put tractor unto forward gear, couple up battery and cross starter contacts to jump the tractor together. 😮😮😮😮😮 old trick works on most brands, not Nuffields, Leylands, 1200's and 1250's
👍 and a decent splitting rail 👍
Hope things settle down for you to reduce your stress. Another interesting video for us to watch, enjoy beer o clock.
Cheers, Poth.
Cheers , how u doin ?
Doin very well ta, driving now which is great. I haven't forgotten ur kind invitation, wife is having health issues at the mo. Only another 5 weeks to wait then after 12 weeks can do much more so that will be good. Will be happier once we can get my wife better. We all take out health for granted but we never know what is around the corner ?
@IanPothecary-dx1jd 👍❤️ hope wifey get well soon
Cheers Dave.
Hi dave i have got the same problem with sleeping wife having treatment for cancer 😢
Feel for you ! Hopefully treatment goin ok ?? ❤️
Nice the 1250 is having an outing as im sure folks at the show will enjoy it Dave 👍
It’s on show ground now 👍 ready for tomorrow
A nice pair, not what i was expecting . As for the clutch some fall together, some are right pigs
😂😂😂 yea think this one took 12 minutes from starting to push to getting it in n flush and a couple bolts in 👍
On your video, you can definitely see the fan turning as you push the engine back onto the bell housing on the 399 back together, which means the splines are trying to line up.
👍 that was penny turning the starter ring on the flywheel with a bar 👍
@@MasseyDave I once changed the clutch on a Massey 675, without using a rail. I used a very strong sack barrow under the engine instead. Bit tricky but it did work.
The only trouble was that I forgot to remove the packing bolts and couldn’t understand why the new clutch was slipping!
Fortunately, easily solved by going through the plate at the bottom on the bell housing, to unbolt and remove them.
@Rickwardful simple think to over look ! Check check check 😂👍
Good work folks.
Thanks
Great work as always team
Cheers Pete and kerian
well done guys
@@georgemeldrum554 cheers
Push...shove...and in she goes! Well done!
@@thewrenchreviews9986 👍👍
Awesome Dave! 🙂👍
Thanks
Awesome
@@benwinstanley101 👍👍
A comparison video of the 1200&1250 would be good
@@benwinstanley101 did one a few months ago
@@MasseyDave thanks I’ll look it up
Cracking job definitely needs,a bit of tlc would look better
👍👍👍
Morning Dave. Hope you make it to the show 🤞. You look like you need a bit of downtime.
Cheers , 👍👍
If have pto in gear and turn pto at rear can help lining splines up. Loving the videos 👍
👍thanks
5th, 😅😅😅😅😅😅😅
@@grahamclark7594 69 th😂