The toad would have made a better stir bar. No electricity needed, just let it kick around in the mixture. And once distilled, it would have made a nice meal too with winter-mint seasoning. lol (jk)
Just finished Orgo and fell in love with the labs! Thank you very much Doug for providing an outlet to enjoy this science for those that don't have access to a proper lab set up
Gotta give you a thumbs up for the detail you put in to these videos, they bring back memories of my organic chem prac classes. I even had to stop the vid at the start to draw out the reaction mechanism here xD
such a great video , specially liked when you showed what you where doing on the whiteboard then showed the practical side just made a beginner like myself understand what's going on a bit easier , keep up the great work with the awesome videos
As said in the vid, wash glass ware after pouring acids. I picked up a glass with good old thick sulfuric acid on it and didn't know it. Soon my hand itched and then burned real bad and I realized I messed up for lacking to ware gloves.
Nice video, especially the frog! Really glad you are back. One suggestion, maybe instead of/ in addition to some of you updates where the reaction has to sit for hours at a time, you could time lapse some of the boiling or distillation. Think it might make for a cool shot. Anyways, keep up the great work!
That was fun to watch. I don't know about this Winter Green smell, its not common in the UK, so im going to try and find some wintergreen sweets so I can get what you were talking about.
I know this video is old I just had to mention that if you have any alcohol candles you use for any of the experiments that you do you could use the winter green contaminated methanol and get a nice smell at the same time
When I perform this reaction I measured the temp and found it much higher than 64C(b.p. of methanol), which is about 104C, because of the protonation of methanol by conc.sulfuric acid, just like when you make ether at 130C using ethanol which is above its b.p.
QUESTION............Why doesn't the hydroxy group on one salicylic acid molecule react with a carboxy group on another salicylic acid molecule and form an ester???????? Is it just steric interference??????? Or it does happen but since there is so much excess methanol that is not sterically hindered that it only happens to make trace amounts?????????? I just watched the video again and you answered my question at the end with font saying that last high boiling stuff left in the flask was probably salicylyl salicylate
Why would toluene have such a high boiling point? It doesn't have any dipole-dipole interaction or hydrogen bonds, just Van Der Vauls interactions and the molecule is pretty round. It should theoretically have a low boiling point. Is it because of its aromaticity?
Chemistry aint my strong suit, but could you add something to the aqueous layer to make it more dense and separate easier? Like just more sulfuric acid?
I have days old recorded footage for this for my channel. Guess I will wait a bit now ._. Also, I had the exact same purple colour in the start, still haven't got to reflux it though. Can it be due to iron contamination from my starting materials? And for the last note, can I use for example ethyl acetate as the solvent in the organic extraction? The distillation later on would be pretty efficient and easy on power use (if you care about those at all here)
"I gave 50 cents to his Patreron to buy some soup. He asked for a dollar; you know what its for!; bottle after bottle of sulfuric acid... he always wants more!"
For future reference when you have iron impurities that you need to deal with if add a little bit of dilute HCl to reduce it and make it soluble then add an equal amount of NaOH it’ll precipitate the iron out. In this case it might have destroyed a little bit of your product but it would have saved you the long distillation step. I use this technique for removing iron so that I can run NMR’s, so I know it works well.
man ur so good bro. im a marine vagineer 😝 that finds chem. work pretty boring. 1 day I slightly understand how acid/base works and since then i made chemistry my bitch, i love chemistry. thanks man, i really appreciate your work.
Is there a way to get stirring with a heating mantle, one which doesn't have stirring by itself Will it work when you put a stirring plate under the heating mantle and control it from there ?
is intamolecular fisher esterification in this molecule a possibility? It would form a four membered ring, but that might not be possible due to ring strain.
Good lord I have become such a geek. This one had me on the edge of my seat and I was silently cheering when the yield was announced. Now the question is: you stated, repeatedly, that this 'stunk'. Was it because there was such a pronounced presence of wintergreen? Was it overpowering or something?
i have done this synthesis before; although i started by purifying aspirin and using HCl (muriatic acid)as my the catalyst. i saw that same purple in the beginning although in my synthesis and it was much stronger. i would agree that it may be because of the extra iron in solution. also i would note that my final product was much much less pure just based on the look and refractive index of it. although i did not drive off the methanol before final extraction.
Could you use CaCO3 instead of NaHCO3? I mean using CaCO3 and then decant the CaSO4. That way the water layer density would be pretty much 1.0. Edit: oops, I meant Ca(OH)2.
I'm a complete layman, but I've been curious about something for a while. I've read that magnesium ions are a Lewis acid, and that Lewis acids will catalyze esterfication reactions. Is there a reason that common magnesium salts (magnesium sulfate, for example) can't be used as an esterfication catalyst?
Magnesium is a weak Lewis acid. In at least one reaction, it can be used to catalyze esterification -- but reaction requires the sacrifice of a dialkyl dicarbonate. See -- www.organic-chemistry.org/synthesis/C1O/esters/esterifications.shtm Some magnesium salts (MgCO3) would merely react with the carboxylic acid and form a precipitate (with the evolution of CO2 and H2O). If MgSO4 were a stronger Lewis acid, it wouldn't be used routinely as a drying agent.
Doug! I can't remember if I've asked you this before, and forgive me if I have, but, is there any possibility of doing a video on the Fischer-Tropsch process? I've had the hardest time finding information about doing it in a lab setup, but, I'm no chemist, so I might be searching poorly. Regardless, from what I read, I feel like it's got to be possible; I'm just hesitant to try it on my own, ignorant as I am; and any video I made on the topic would be completely littered with mistakes.
Hey, i don't know how to get the K2O but if you want a good practice you can extract the KCl. First dissolve a whole lot of your fertilizer in water. The K2O will react with water to form KOH and the KCl will stay in solution. Then you add some HCl(based on how much fertilizer you added and on how much K2O or reacted KOH the fertilizer contains). Let it react(KOH + HCl = KCl + H2O), filter the solution of KCl because the fertilizer(I am just guessing)that you are using usually contains a LOT of impurities. Now boil down the solution and that's it. You can get KCl this way but the purity isn't great. You could do a recrystallization but the KCl is too soluable in water. So it's just easier to buy it directly.
+Jozsef Ienciu Just don't forget to use less HCl or find a way to neutrallize it because boilling a solution with left over HCl can be very dangerous. Be safe.
Does the lab smell like wintergreen now? Oh, and excellent video, it was very entertaining and informative to watch. "Now back to non-frog related activities" haha.
I would love to see somebody like you make a poly aromatic acid from xylene. I wonder if you could use the same method used to make benzoic acid out of toluene. I have loads of potassium permanganate take that then make a polyamine out ethylene glycol and ammonia. then form a polyamide bond between those chemicals. I would throw some change your way, but I'm not far from begging for it these days.
i really enjoyed the relative unscripted feel of this. it seems like everyone is always doing the experimenting before filming and all that gets posted isnl a polished act. i much prefer a more realiatic video.
Isn't the reason why your methanol/water distillate was contaminated with product that the product can be steam distilled and that basically is what your doing when you distill out the water?
Consider that as yoy distill off methanol, the sulfuric acid is still in the mixture helping equlibrium along. As you distill off methanol, methyl salicylate comes apart and your collected methanol comes right out of your yield..n Better to use a nbig old beaker and sodium bicarbonate, then dump the reaction mixture *quench( into toe bicarbonate. Then there is no acid catalysed equlibrium and bicarbonate is not basic enoiugh to promote alkaine hydrpylsis. I've used this reaction many times in a basic organic lab at UTSA.
Hey Doug, I realy like your videos, but this workup is crapy... (no Offence) Why dont you use a azeotropic distillation? I think this is because you dont have an dean-strak-apparatus. I assume you have a addition funel with a pressure equalizing tube, so the MacGyver way of life would be to use it as the addition funel as a dean-stark apparatus. just take a Roundbottomflask as usual, on top an addition funnel with an refluxcondencer. and than you can do it like normal, but you just need an 1.75 molar excess of your Alkohol (DCM will be your cosolvent) (reff. Oraganikum) and one or two drops of H2SO4 as cat. (prevents dehydration) put about 30ml DCM in the Reaktionflask and about 20ml DCM in the closed addition funnel, and set up for reflux, DCM is ofcause more dense like water so you drip the DCM back in the flask an drive you reaktion to completion! when no more water comes over, put your cooled flask contents in a sep. funnel, wash 2 times with SMAL PORTIONS water, an neutralize it with 5% NaHCO3 (just 5%, so you prevent hydrolysis of your ester), and wash again with smal potions Water. dry it over MgSO4 or some other drying agent and set up for normal or Frak. Distillation to puryfy your Product. I hope this was helpful, and have a nice day^^
No offense taken! My next project is actually an oxalate diester which will be a little harder to drive to completion than simply refluxing with acid. I wanted to show the basics of this reaction before I move on to a more complex setup. Part of the reason this particular synthesis is so easy (as you probably know!) is that this ester is fairly stable against hydrolysis, and this reaction is easy to drive nearly to completion with just a bit of H2SO4, so it works even with a crappy workup! :) I do actually have a dean-stark trap: ruclips.net/video/wxYwE6lGNMI/видео.html It will be used again to make the oxalate diester, which I have secret and exciting plans for.
I can't see why anyone would ever use a dean-stark for making an ester unless you were trying to esterify a particularly stubborn, sensitive or expensive/late-stage molecule (in which case you might use diazomethane, although It's one of the things I never want to use) as the reagents are so cheap. I don't see a problem with the workup considering it's being done in a home lab setup. It got the product out, right? Also, nice to see you making videos again Doug!
Rob Newland you are right, but im am chemist too, im am perfectionist, and this is the way I leaned it in the lab, because of the equilibrium and stuf. no doubt, on this it works fine and the reagents are chep bla bla, but as mentionet before im a perfectionist, who wants the hightest possible yield~
seriously, your vids just keep getting better.
GREAT VIDEO.......I love how he goes over the things in the pot after a reaction and his process of thinking of how to extract and purify
You and your experiment are great! Your mind is very clear, and yield of experiment is very high!
Ending a several month hiatus with two back to back long videos? Today is a good day
Then he disappears again :-( Very sad - Definitely one of the best chem ToobYoubers.
11:08
Lab Jack: " Hey,I need some oil here!"
I miss the videos and love the way you teach. I hope all is well Doug.
Doug is always on point. Great insight into your tnought process when dealing with roadblocks like emulsions.
The toad would have made a better stir bar. No electricity needed, just let it kick around in the mixture. And once distilled, it would have made a nice meal too with winter-mint seasoning. lol (jk)
Just finished Orgo and fell in love with the labs! Thank you very much Doug for providing an outlet to enjoy this science for those that don't have access to a proper lab set up
Can U use acetone instead of ethonol
I have a Organic chemistry exam shortly and this is one of the rxns i have to study!
Nice
There's much worse things a chem lab can smell of.
Miss you Doug.
Gotta give you a thumbs up for the detail you put in to these videos, they bring back memories of my organic chem prac classes. I even had to stop the vid at the start to draw out the reaction mechanism here xD
Hey, why did you stop making videos? Are you okay dude?
You're not dead or in jail, YAY!
11 months now, get worried
I just would have expected him to leave a message or something if he wanted to stop uploading to the channel... It seems like he just disappeared.
yea he is completely gone now
such a great video , specially liked when you showed what you where doing on the whiteboard then showed the practical side just made a beginner like myself understand what's going on a bit easier , keep up the great work with the awesome videos
I agree, learning the theory before the reaction is more educational than just mixing a bunch of chemicals.
That was a good one! I like the more in-depth videos even though I barely understand the chemistry.
What happened to him?
Thank you for your great chanel! I value the most the lecture in the begining of every preparation...
As said in the vid, wash glass ware after pouring acids. I picked up a glass with good old thick sulfuric acid on it and didn't know it. Soon my hand itched and then burned real bad and I realized I messed up for lacking to ware gloves.
Nice video, especially the frog! Really glad you are back. One suggestion, maybe instead of/ in addition to some of you updates where the reaction has to sit for hours at a time, you could time lapse some of the boiling or distillation. Think it might make for a cool shot. Anyways, keep up the great work!
That was fun to watch. I don't know about this Winter Green smell, its not common in the UK, so im going to try and find some wintergreen sweets so I can get what you were talking about.
I'm in the UK too, and I've never even heard of wintergreen.
Do you know listerine mouthwash? It contains methyl salicylate.
Anticonny So it's a 'chemically', minty scent?
I know this video is old I just had to mention that if you have any alcohol candles you use for any of the experiments that you do you could use the winter green contaminated methanol and get a nice smell at the same time
please do some more videos, ur truly missed!
good to see u back doug great vids
When I perform this reaction I measured the temp and found it much higher than 64C(b.p. of methanol), which is about 104C, because of the protonation of methanol by conc.sulfuric acid, just like when you make ether at 130C using ethanol which is above its b.p.
Did you try just warming the solution back up to keep the salts from precipitating out?
QUESTION............Why doesn't the hydroxy group on one salicylic acid molecule react with a carboxy group on another salicylic acid molecule and form an ester???????? Is it just steric interference??????? Or it does happen but since there is so much excess methanol that is not sterically hindered that it only happens to make trace amounts?????????? I just watched the video again and you answered my question at the end with font saying that last high boiling stuff left in the flask was probably salicylyl salicylate
Why would toluene have such a high boiling point? It doesn't have any dipole-dipole interaction or hydrogen bonds, just Van Der Vauls interactions and the molecule is pretty round. It should theoretically have a low boiling point. Is it because of its aromaticity?
agent475816 exactly
what are the key findings, significance and major conclusions of this process, I didn't get it
I love your videos, come back please!
"Ok, back to non-frog related activities." lol
Chemistry aint my strong suit, but could you add something to the aqueous layer to make it more dense and separate easier? Like just more sulfuric acid?
I'm amazed your not a teacher or something, you explain reactions extremely well.
He's a teacher on YT, so yeah. ;)
Why is the short condenser needed for the destilation of DCM?
I have days old recorded footage for this for my channel. Guess I will wait a bit now ._.
Also, I had the exact same purple colour in the start, still haven't got to reflux it though. Can it be due to iron contamination from my starting materials?
And for the last note, can I use for example ethyl acetate as the solvent in the organic extraction? The distillation later on would be pretty efficient and easy on power use (if you care about those at all here)
"I gave 50 cents to his Patreron to buy some soup.
He asked for a dollar; you know what its for!; bottle after bottle of sulfuric acid...
he always wants more!"
There are actually Teflon Keck(R) clips.
We have toads all over the place here but I have never seen them in our basement.
10:54 you said the color _didn't_ change? didnt it go from purple to yellow? or am i seeing things?
Could you do a video on mercury fulminate?
Did his ketene lamp blow up or something?
Can i use Xylene as a solvent to get out the MeSalicylate?
For future reference when you have iron impurities that you need to deal with if add a little bit of dilute HCl to reduce it and make it soluble then add an equal amount of NaOH it’ll precipitate the iron out. In this case it might have destroyed a little bit of your product but it would have saved you the long distillation step. I use this technique for removing iron so that I can run NMR’s, so I know it works well.
Doug please come back and make more videos.
to deal with the water issue, couldn't you add a dessicant to the solution to absorb excess water?
man ur so good bro. im a marine vagineer 😝 that finds chem. work pretty boring. 1 day I slightly understand how acid/base works and since then i made chemistry my bitch, i love chemistry. thanks man, i really appreciate your work.
It's been 3 months now, where are you dude???
Love your channel, very inspirational stuff. :)
Can I make aromatic esters from acid chloride in lab? How do I tackle the HCl fumes? Or do I have to add something to neutralize it?
Is there a way to get stirring with a heating mantle, one which doesn't have stirring by itself
Will it work when you put a stirring plate under the heating mantle and control it from there ?
is intamolecular fisher esterification in this molecule a possibility? It would form a four membered ring, but that might not be possible due to ring strain.
Oh doug , 2020 came and you had already departed.
that kinda sucks , hope youre alive still.
Hey Doug. PLEASE MAKE MORE VIDEOS PLS PLS PLS!!! *impatience intensifies*
also, wouldn't the toluene dissolve the salicylic acid as well?
Is it neccesary to remove methanol by condensing or can we just procede to the addition of saturated sodium carbonate solution?
Good lord I have become such a geek. This one had me on the edge of my seat and I was silently cheering when the yield was announced. Now the question is: you stated, repeatedly, that this 'stunk'. Was it because there was such a pronounced presence of wintergreen? Was it overpowering or something?
What are your thoughts on molecular sieves to improve yields?
Furthermore what about a dean-stark trap and a carrier solvent?
Attack of the dreaded acetoad !!
“ALL GLORY TO THE ACETOAD”
hey it went lilac. Why is that? Impurities in the drain cleaner?
Yeah. I'm guessing it may have been some carbon particles caused by local superheating because I added the acid rather fast and without stirring.
It was probably some Iron contamination. Iron(III) will complex with the salicylic acid giving a purple solution.
I had the same thing happen using drain cleaner H2SO4. I forgot about it until now.
i have done this synthesis before; although i started by purifying aspirin and using HCl (muriatic acid)as my the catalyst. i saw that same purple in the beginning although in my synthesis and it was much stronger. i would agree that it may be because of the extra iron in solution.
also i would note that my final product was much much less pure just based on the look and refractive index of it. although i did not drive off the methanol before final extraction.
8:51 That’s the first time I’ve ever heard that name used for baking soda.
Welcome back, Doug.
Did you risk saponifying your ester by stripping off the methanol while the acid and reaction water were still present?
can you extract neodymium from magnets?
Yes. There is a sciencemadness thread about it
www.sciencemadness.org/talk/viewthread.php?tid=66405
amphibian detour at 28:22
damn, that temp was climbing SCARY fast...didn't know heating mantles could be so powerful!
Could you use CaCO3 instead of NaHCO3? I mean using CaCO3 and then decant the CaSO4. That way the water layer density would be pretty much 1.0.
Edit: oops, I meant Ca(OH)2.
We miss you so much :((((((
I'm a complete layman, but I've been curious about something for a while. I've read that magnesium ions are a Lewis acid, and that Lewis acids will catalyze esterfication reactions. Is there a reason that common magnesium salts (magnesium sulfate, for example) can't be used as an esterfication catalyst?
Magnesium is a weak Lewis acid. In at least one reaction, it can be used to catalyze esterification -- but reaction requires the sacrifice of a dialkyl dicarbonate. See --
www.organic-chemistry.org/synthesis/C1O/esters/esterifications.shtm
Some magnesium salts (MgCO3) would merely react with the carboxylic acid and form a precipitate (with the evolution of CO2 and H2O).
If MgSO4 were a stronger Lewis acid, it wouldn't be used routinely as a drying agent.
Doug! I can't remember if I've asked you this before, and forgive me if I have, but, is there any possibility of doing a video on the Fischer-Tropsch process? I've had the hardest time finding information about doing it in a lab setup, but, I'm no chemist, so I might be searching poorly. Regardless, from what I read, I feel like it's got to be possible; I'm just hesitant to try it on my own, ignorant as I am; and any video I made on the topic would be completely littered with mistakes.
Are you gonna make new videos Doug?? I really like you channel. You, Nile red and chem player are the best! I really miss your work ☹
Did ( Doug's Lab ) quit making videos ?
Doug, if your out there, could you please do some chemistry videos involving wood?
gasp! a new dougs lab vidyer!
Its been over a year now, are you alive man??
Hi. You have some idea how to separate k2o from kcl or how to purify k2o from kcl?
Hey, i don't know how to get the K2O but if you want a good practice you can extract the KCl. First dissolve a whole lot of your fertilizer in water. The K2O will react with water to form KOH and the KCl will stay in solution. Then you add some HCl(based on how much fertilizer you added and on how much K2O or reacted KOH the fertilizer contains). Let it react(KOH + HCl = KCl + H2O), filter the solution of KCl because the fertilizer(I am just guessing)that you are using usually contains a LOT of impurities. Now boil down the solution and that's it. You can get KCl this way but the purity isn't great. You could do a recrystallization but the KCl is too soluable in water. So it's just easier to buy it directly.
+Jozsef Ienciu Just don't forget to use less HCl or find a way to neutrallize it because boilling a solution with left over HCl can be very dangerous. Be safe.
Does the lab smell like wintergreen now?
Oh, and excellent video, it was very entertaining and informative to watch. "Now back to non-frog related activities" haha.
I would love to see somebody like you make a poly aromatic acid from xylene. I wonder if you could use the same method used to make benzoic acid out of toluene. I have loads of potassium permanganate take that then make a polyamine out ethylene glycol and ammonia. then form a polyamide bond between those chemicals. I would throw some change your way, but I'm not far from begging for it these days.
i really enjoyed the relative unscripted feel of this. it seems like everyone is always doing the experimenting before filming and all that gets posted isnl a polished act. i much prefer a more realiatic video.
Yo Doug, where you at?!!?
Isn't the reason why your methanol/water distillate was contaminated with product that the product can be steam distilled and that basically is what your doing when you distill out the water?
\o/ loved the video and the special guest.
To avoid spraying you face if you mess up you can vent by using the valve, and pointing it somwhere safe. :-)
whered ya go? we miss u so. seems like its been forever, that youve been gone.
what is wintergrèen
Organic chemistry students flocking to this video when the semester is almost over..
when are new videos coming
Consider that as yoy distill off methanol, the sulfuric acid is still in the mixture helping equlibrium along. As you distill off methanol, methyl salicylate comes apart and your collected methanol comes right out of your yield..n Better to use a nbig old beaker and sodium bicarbonate, then dump the reaction mixture *quench( into toe bicarbonate. Then there is no acid catalysed equlibrium and bicarbonate is not basic enoiugh to promote alkaine hydrpylsis. I've used this reaction many times in a basic organic lab at UTSA.
Gorgeous work!
Can you make a video on how to make copper phthalocyanine please!
where are you????
Thank you very much i will try.
Hey Doug, I realy like your videos, but this workup is crapy... (no Offence)
Why dont you use a azeotropic distillation?
I think this is because you dont have an dean-strak-apparatus.
I assume you have a addition funel with a pressure equalizing tube, so the MacGyver way of life would be to use it as the addition funel as a dean-stark apparatus.
just take a Roundbottomflask as usual, on top an addition funnel with an refluxcondencer.
and than you can do it like normal, but you just need an 1.75 molar excess of your Alkohol (DCM will be your cosolvent) (reff. Oraganikum) and one or two drops of H2SO4 as cat. (prevents dehydration)
put about 30ml DCM in the Reaktionflask and about 20ml DCM in the closed addition funnel, and set up for reflux, DCM is ofcause more dense like water so you drip the DCM back in the flask an drive you reaktion to completion!
when no more water comes over, put your cooled flask contents in a sep. funnel, wash 2 times with SMAL PORTIONS water, an neutralize it with 5% NaHCO3 (just 5%, so you prevent hydrolysis of your ester), and wash again with smal potions Water.
dry it over MgSO4 or some other drying agent and set up for normal or Frak. Distillation to puryfy your Product.
I hope this was helpful, and have a nice day^^
No offense taken! My next project is actually an oxalate diester which will be a little harder to drive to completion than simply refluxing with acid. I wanted to show the basics of this reaction before I move on to a more complex setup. Part of the reason this particular synthesis is so easy (as you probably know!) is that this ester is fairly stable against hydrolysis, and this reaction is easy to drive nearly to completion with just a bit of H2SO4, so it works even with a crappy workup! :) I do actually have a dean-stark trap: ruclips.net/video/wxYwE6lGNMI/видео.html
It will be used again to make the oxalate diester, which I have secret and exciting plans for.
Ohh sorry, you are right.
I have not seen it from this didactic perspective.
Im happy to see you back on youtube, i kinda missed your Videos^^
I can't see why anyone would ever use a dean-stark for making an ester unless you were trying to esterify a particularly stubborn, sensitive or expensive/late-stage molecule (in which case you might use diazomethane, although It's one of the things I never want to use) as the reagents are so cheap. I don't see a problem with the workup considering it's being done in a home lab setup. It got the product out, right?
Also, nice to see you making videos again Doug!
Rob Newland
you are right, but im am chemist too, im am perfectionist, and this is the way I leaned it in the lab, because of the equilibrium and stuf.
no doubt, on this it works fine and the reagents are chep bla bla, but as mentionet before im a perfectionist, who wants the hightest possible yield~
You’re awesome. Thank you.
are you still alive? its been 7 months
Also, methyl salicylate will steam distill quite nicelt.
How about solving your ether problem with a nice synthesis? :)
where the fuck is doug, is he dead/severly injured
Iamnyamgamer Apparently his work and home life is keeping him from making videos.
Too bad this channel died. There are not much good chemistry channels besides him, NurdRage and NileRed :(
DeadBeatFlyingJackass Chemplayer?
where you at?
You forgot to mention wintergreen flavored dip.
Am I dreaming or is doug active again?
I miss doug
thanks a lot for the video it was great !