Very impressive installation. Thanks for sharing. Disagree with other commenters on the music. Where my fellow Ron Burgundy fans at... who doesn't like jazz flute?
Hey man amazing video splendid stuff. I am looking to do the exact mod to my 2015 mazda 3. Is there any way i can message you and get some guidance while i try to do this. Hoping for a positive response.
Add a hidden camera under side mirror to blind spot side mirror light indicator power wire. it turns on the camera on that side of which ever side a vehicle is approaching from the rear and shows up on the 4-quad screen only or by pass with all 4 going and or powers on when detection is detected and front and rear can be with constant on and off power switch straight to battery for continuous recording and or monitoring.
Can the image be mirrored for the driver side? Looks kinda confusing if both the driver and passenger side show the vehicle on the same side of the screen
Hi mate, iam wondering how you did the wiring to the side cameras i installed the switsher, the rear camera is working fine but when i hook the trigger to from turn signal the camera won't come on.
@@Dhawnasraoui you need to provide power to the module and then have a wire from each separate blinker and reverse wire so each camera gets a individual signal. So you should have 3 separate power trigger wires. Watch the video again. Also make sure the negatives blacks are all hooked up properly as well. Good luck
Isn’t the blinker signal intermittent power? I’d think if I hooked power directly to my blinker power wire it would turn the camera on and off with the blinker
The module uses accessory power so when your radio comes on, the module turns on the blinker is just to send the module the signal as to which blinker camera you want to turn on
I hope you can help me. I just installed these on the directional mirror lights on a Ram promaster 2500. The left and right cameras come on just fine when I have the key switch set to ACC, but when I start the van the cameras will not turn on when I try the left and right blinker. They will work with the remote button though. I am at a loss on why this is happening and hope you might have an idea or two. Thanks in advance.
1 at a time. the pioneer is kind of behind on the cameras settings. kenwood and alpine let you integrate straight to the headunit but with pioneer you need to buy the stupid 3rd party module. not to mention the headunit is not the smoothest. i recommend you get a kenwood or jvc floating screen instead as its less buggy
@@mildaudiophile3879 I'm not a crybaby. Your video was just overshadowed by music that detracted from your message. I couldn't hear what you were trying to share because the music was distracting.
Very impressive installation. Thanks for sharing. Disagree with other commenters on the music. Where my fellow Ron Burgundy fans at... who doesn't like jazz flute?
Hey man amazing video splendid stuff. I am looking to do the exact mod to my 2015 mazda 3. Is there any way i can message you and get some guidance while i try to do this. Hoping for a positive response.
Add a hidden camera under side mirror to blind spot side mirror light indicator power wire. it turns on the camera on that side of which ever side a vehicle is approaching from the rear and shows up on the 4-quad screen only or by pass with all 4 going and or powers on when detection is detected and front and rear can be with constant on and off power switch straight to battery for continuous recording and or monitoring.
Can the image be mirrored for the driver side? Looks kinda confusing if both the driver and passenger side show the vehicle on the same side of the screen
Hi mate, iam wondering how you did the wiring to the side cameras i installed the switsher, the rear camera is working fine but when i hook the trigger to from turn signal the camera won't come on.
@@Dhawnasraoui you need to provide power to the module and then have a wire from each separate blinker and reverse wire so each camera gets a individual signal. So you should have 3 separate power trigger wires. Watch the video again. Also make sure the negatives blacks are all hooked up properly as well. Good luck
Mannnn your channel is GOATED! Road to 1k subs! You just got one from me!
Thank you more content soon
Bro where did you get that camera? I can't find anything like that.
Amazon. There’s a bunch on there. Just type car camera
Awesome! What head unit is that?
the music in the background drowns out all vocals/voice. Can't hear anything being said
If people keep crying about I’m just going to delete the video.
What brand camera .can I put the link somewhwre so I can buy them
How can I know if the cameras work with my head unit display?
Those your music stops whenever you signal ?
Isn’t the blinker signal intermittent power? I’d think if I hooked power directly to my blinker power wire it would turn the camera on and off with the blinker
The module uses accessory power so when your radio comes on, the module turns on the blinker is just to send the module the signal as to which blinker camera you want to turn on
So how do I make sure the camera doesn’t blink with the light. I’m not quite understanding
@@muuks_the_entrepreneuryour wire up wrong then read other comments
This is so cool
Good video
Hola como se hace para coger la señal de los intermitentes para las camaras de los espejos y no sea imagen intermitente como los intermitentes...?
Corrente was para el modulo y sinal de intermittent de cada lado.
Where’s the link to these tiny cameras?
I hope you can help me. I just installed these on the directional mirror lights on a Ram promaster 2500. The left and right cameras come on just fine when I have the key switch set to ACC, but when I start the van the cameras will not turn on when I try the left and right blinker. They will work with the remote button though. I am at a loss on why this is happening and hope you might have an idea or two. Thanks in advance.
You have to use 2 relay with your installation one each side camera
Thanks for the reply. I ended up using a different product for the directional cameras
@@whiteoconnelldo you mind sharing what u came up using pls
Where you got that camera kit from ?
Didn't show installing cam in mirror, title of video. Meh.
Does it show all 4 video ? like a 360 bird eye view or just one at a time?
1 at a time. the pioneer is kind of behind on the cameras settings. kenwood and alpine let you integrate straight to the headunit but with pioneer you need to buy the stupid 3rd party module. not to mention the headunit is not the smoothest. i recommend you get a kenwood or jvc floating screen instead as its less buggy
I had to stop watching, that music is just awful especially for an instructional video
🤩🤩🥳🥳
Does not really explain how to hook up to screen and the switcher
The background music is much louder than your voice
Turn that music down
Background music too high ruined the video👎
What brand is that
i dont recommend that brand i got find a better one as this one does not do well in rain or at night.
What do you recommend
What’s the link to the one you recommended?
Good instructive video, except I can't concentrate on your voice while that irritating looped music plays. Defeats the purpose of speaking 🇦🇺
Please for the love of all that is good, take out the music, I can't hear you even when I turn it all the way up.
Use headphones 👍
Background music is unnecessary and detracts from the purpose of your video.
I’m deleting the video today. Too many crybabies. Thanks for watching.
@@mildaudiophile3879 I'm not a crybaby. Your video was just overshadowed by music that detracted from your message. I couldn't hear what you were trying to share because the music was distracting.