Big Turbo Silverado gets Tuned!! Its so fast!!
HTML-код
- Опубликовано: 6 янв 2024
- Instagram: SiskBuilt
TikTok: SiskBuilt
Business Inquiries: siskbuilt@gmail.com
Engine
6.0 370 ci Iron Block, Weisco Pistons -3cc dish, Eagle rods 6.125.
-ARP hardware throughout
-Studded heads
-Comp Cam -235/243 .621/.624 113
-SKU 54-460-11 (Grind Number 285LR HR-13)
-Tuned by Elite Tuning
-799 heads
-90mm TB with x link
-TBSS intake manifold
-2006+ radiator with e fans
-Mighty Mouse Mild Catch Can
-LS6 ported Oil Pump
-Straight 4” exhaust
-Flex Fuel Sensor to support e85 or 93
-220 Amp Alternator
Turbo
-Huron Speed T6 Single turbo kit
-VS Racing s480 80/96 turbo
Fuel
Dual 450 walbro
-8an feed
-6an return
-1000 cc FIC injectors
Transmission
-Level 5 4L80e RPM Transmission
-40k Trucool Cooler
-3800-4000 triple disk converter by Circle D
-Speed engineering drive shaft safety loop
-upgraded Yoke and conversion u joints
-Speed Engineering cross member
Rear
-3.90 gear ratio
-Eaton trutrac
Brakes
2020+ Front Caliper and Rotors
15" Conversion Rear Brakes
Suspension:
Belltech 4"/6" lowering kit
Springs and spindles for the front
C-Notch Flip Kit for the rear Развлечения
I had the same reactions when I drove mine for the first time wish I could experience that again for the first time. I’m glad you got it going enjoy it!!
Dude I was so pumped and still am! Love it so far
That's what it's all about! Fk yeah 🤘
Time to turn up the power then
@@Thaggard_is300 I said for the first time. I still enjoy it lol.
Wish I could enjoy this 😢
I’m glad to see this beast up and running💪🏼
She’s ripping and it feels great!
I love how happy and excited you are lol
by far the best chopping LS i have ever heard
Your reaction is priceless man!
I have a 03 Sierra with a turbo lq4 and t56 swap. I blew the engine and I’m rebuilding it with a tsp 408 stroker kit. I can’t freaking wait to drive it again
This has motivated me to go ahead and build a truck!!!
love the channel, keep it up brother!
That thing is an absolute beast!!
Thank you!
Sounds good man ive got a 99 looks like yours ,great trucks
sounds great 🔥
5:09 is the most glorious alarm clock.
Your Neighbors must love you i know my neighbors love my lsx cammed 😂
sounds sooooo good sheeeesh!! panda is boosted and gf approved
Luckily I have that boost controller so I can just turn it down and let her go drive it
That's one Bad ass truck
Cool build man...
Bro “ ah did you hear it?” I felt that it my soul.
I have the same trans cooler and my 4l80e runs about 170-180 in the Texas heat with fan off and fan on stays just below 170. No issues
I want it the fluid colder than that! Around 70’s here it’ll still be 160-170. Could be the lines I have. Just some more research on it and some things to try so I can get the temp down
Badass truck homie!! Chevrolet all day!!!🇺🇲🇺🇲💪💪
That’s what I’m sayin!!!!
Awesome truck dude, I found a stock 54k mile 4.8 2005 chevy silverado 1500 I think I am going to buy and turbo it, the body is super clean with zero rust. What wheel setup is that? Those are sick.
Should mount the cooler near the spare tire on a angle
Elite tuning is one of the best
Truck is awesome
Thank you!
truck is a beast brotha! we have to meet up for a cars and coffee one day
Man, thats a sweet setup, good lookin truck man! What size motor? I'm just finishing my 1st turbo build in my 99 Camaro. I built a healthy 408 Mike Lough did his magic on the block and rotating assy., as well as his oil mod. I've got a FI 91/102 T4 that's going to go on it, fab 9", TH400, super clean 44k mile car.
What'd yall do for exhaust? Three truck sounds nasty as hell man! I really wanted to run dual exhaust, split it at the turbo and try to squeeze it thru the k member. I know it'll fit on the d/s, but idk about the other... or ill do a single 4". It will have a exhaust with a muffler and will never have fender exits!lol I can't wait to get it running! It's been a long time coming man! I'm a anti roll bar, some fluids, a drive shsft... I'm sure a couple other small things, but I'm there with it!
Your truck sounds nasty as hell man! What cam is in it? I ended up with a cam spec'd by Cam Motion, to help keep my backpressue down as the turbo is still a T4, but it's all t6 aside from that.
I have a 2001 single cab. Maybe it'll look that good one day. And have a LS in it. Just a 4.3 for now.
Don’t wait too long start getting little pieces here and there
awesome man! where is this, port saint lucie?
Where did you get the blue lights for speedometer?
Looks good.
For that size turbo,hopefully you did the -12 drain to oil pan. I used the -10 in the huron kit and it wasn't enough drain back for my 80mm. I have v4 t6 kit from huron. I was smelling oil burning due to not having the proper drain size and was backing up. Just an FYI
I used a -10! But so far I haven’t smelt any oil yet, I do have an oil leak on the pan somewhere. Tracking that down!
How do you have the crankcase vented?
Love the content, im installing the huron speed t6 set up in a 4th gen camaro atm. If love to get the same kit like yours for my 04 AWD Escalade. Who are you using for remote tuner? The 4th gen is on a holley, i have someone for that but i would need someone for the escalade. Some tuner recommendations for the central florida area would be cool if possible
yeah I'm using Elite Tuning on a stock computer! they may also tune on the Holley system !
truck looks good and sounds good / what size tires are you running in the back and front also thank you for your time
Rears are 295/65/15 and fronts I think are 245/45/20
Question for you, what did you have to change to keep the A/C? Looks like longer lines or something, where did you get them? I have an on3 turbo kit coming at the end of the month and definitely need A/C here in Vegas! Looks and sounds great man!
I dont know who else makes it but from Huron Speed it routes the accumulator away from the exhaust and add some length to the line, it’s tight but so far seems to work!
Hey buddy are you planning to go to Street Car Takeover in Bradenton in a couple weeks? Would be cool to see this thing make a pass!
Nice truck, whats your tire specs?
I just got Bosch 210 injectors for my 6.0LS with 88mm turbo. Think that’s overkill?
How are you mounting your harness without a cage?
Can we get a sound system video on the Silverado
Where & who tuned your truck, i have a 2014 6.0 with the ls3 heads & truck Norris cam I need a good tune
She sounds mean!!!
Thank you!!!!
What cam do you have in your truck? It's nasty
Do you do ride alongs for your viewers!?
Sure do! Come on by I’ll let you drive it!
what PC are you using for HP tuners?
are you running stock driveshaft?
What cam are you using
What wheel and tire setup are you running? And did you have to do anything to make it fit?
Those are bogarts ,look for bogarts for silverado
Literally bolted right on!
Rear wheel set up and specs?
What bed cover is that? I've searched and can't seem to find a low profile like that one
It’s a eBay special from about 6 years ago!
Thing is beautiful but whats up with the headliner 🦓 🤔
Funny story! Bought the truck with that headliner about 6 ish years ago. At first I HATED it but then I stopped noticing it. So far I did everything else but change the headliner 😂
Hey bro what rear brake setup did you use to run them if I can get some info
The 1320 brake 15” conversion!
Where are you getting the oil feed from if your running a oil cooler aswell?
There is a sandwich plate I’m getting. I’ll make a video on it!
Is this a 5/7 drop?
what kind of wheels you got on the back wanna order some for my 1500
They are Bogart racing wheels!
What tire size you running
What cam is that? Sounds mean af
It’s a NA Comp Cam. 235/243 duration!
Hopefully that exhaust leak is not in a place that affects the tune🤔
It’s not! I know where it’s at and it’s after the o2 sensors. After the turbo and everything. Just a down pipe piece that I can’t get to seal all the way
14:40 where is the poosie magnet?
wheel and tire specs ?
What tire size
Is that headliner wrapped in real zebra skin?
What’s the rwhp
Why would it shut off at stop lights? My built 6.0 does the same at times and going in reverse.
In the tune, something needs to be updated, it shouldn’t do it. New tuner and tune haven’t had an issue
@@SiskBuilt awesome. I appreciate it bro. Mines in the shop now getting a high ram intake and Stage 3 btr cam. Can’t wait! Love the truck man
@@S0T210 that’s what’s up! I need that holley high ram but I don’t wanna spend money right now 😂
@@SiskBuilt after that big turbo, i don’t blame you 🤣
What do you do for work brother?
I’m a planner for the county!
still 3.90 gears?
Yup! Still the same gears!
Whats the hp?
Atleast 300! Hahah
0% on the boost controller is equal to waste gate, just an fyi
I currently have a 8 pound spring in there, but 0% on the controller is about 4 psi!
Did you say the driveshaft exploded lol.
If it did hahah I went to a place in town and was joking if it didn’t work
@@SiskBuilt 😂 I guess I missed that part.
What size turbo ?
80/96!
@@SiskBuilt Nice!! I’m gonna upgrade to a bw 72 mm turb
Wapoit ioapot boitaso capstoneoit wiopuoitpouast
Wreck it, you won't
Trying not to 😂😂😂😂
You could have at least picked a nice looking Silverado, not the ugliest of them all, the cat eyed version.
Headliner proves he gay
What wheel and tire setup are you running? And did you have to do anything to make it fit?
The rears are an off the shelf 15x10 by bogart and the fronts are a different offset to clear the 2020 front brakes!
Are the fronts 17s or 18s? I have 2020 brakes on mine and some 17s fit and some don't it's super weird. @@SiskBuilt