PL91T PL82T PL92T PL41PLUS how to change the gasket PL91T vipline

[@jdapena]

Hi. When I use the Lelit blind portafilter on my Elizabeth I have water leakage. This doesn't happen with the two-spout stock one. Both the machine and the portafilter are less than two months old. I Keep a rigorous wash cycle (both chemical and simple) so this shouldn't be a problem. I have an IMS competition shower installed. I've seen another use who had the same problem ruclips.net/video/9aIb3ReM3DU/видео.html I've ran out of options. Could you please advise? Thank you.

[@lelitinsider2977]

hi, In the video in the link the filter holder is not fully engaged,
have you tried tightening the filter holder to the centre?
if you can send a video to [e-mail]

[@ProfSimonHolland]

where can i buy replacement gaskets?

[@lelitinsider2977]

you have to contact the lelit reseller in your country

[@lelitinsider2977]

or here www.lamacchinadelcaffe.com/

[@orthonima]

I changed the gasket and now I get water leakage on the side of the portafilter. How can I fix that ? Thank you

[@sebastrem05]

Does it have an orientation to reinstall it? To maximize water distribution.

[@lelitinsider2977]

the holes are circular, so it does not change anything about water distribution

[@andrdugin]

How often these gaskets should be changed? Thank you

[@lelitinsider2977]

depends on how many hours the machine is left on, when it dries out it is better to change it, as leaks start to occur.

[@andrdugin]

Thank you!

[@andreasidarto7822]

Hi, to clean the diffuser on pl92t is it ok to turn it up side down? Thank you

[@lelitinsider2977]

yes, it is ok

[@andreasidarto7822]

@@lelitinsider2977 thank you very much

[@Stellina-vq5jj]

Buongiorno,
ogni quanto andrebbe fatta questa operazione di pulizia?
Ogni quanto andrebbero sostituiti questi pezzi con dei nuovi?
Posseggo una lelit anita ad uso domestico.
Grazie

[@lelitinsider2977]

Buongiorno, la pulizia e' consigliabile una volta a settimana, se la pulizia viene fatta regolarmente non vi e' necessita' di cambiare pezzi

[@oksako7932]

Thank you for your instructions! The black gasket has a shiny and a mat side. Which side to put up (facing into the group head)?
Thank you!

[@lelitinsider2977]

the shiny

[@oksako7932]

@@lelitinsider2977 thank you for your fast reply!!!

[@mikefenn7509]

@@lelitinsider2977 just want to confirm whether that is correct (Lelit Elizabeth V2) since I've been conflicting instructions: The smooth/shiny side with the beveled edges faces up into the group head while the rough/matte side with the un-beveled 90 degree corners faces down into the portafilter?

[@lelitinsider2977]

the shiny facing into the group head

[@lelitinsider2977]

@@mikefenn7509 yes

[@wmsan]

where to find those pieces ?

[@lelitinsider2977]

hi, you have to contact the lelit reseller in your country