How to solve a skewb! Easiest beginner method 2020

Поделиться
HTML-код
  • Опубликовано: 23 янв 2025

Комментарии • 96

  • @odinnz7500
    @odinnz7500 3 года назад +9

    Best skewb how to on RUclips. I watched all the big boys first got confused, watched this once and I can do it easy.
    Thanks

    • @Speedcubenz
      @Speedcubenz  3 года назад

      Yo thanks so much! Glad I could help :)

  • @raquellandaverde9360
    @raquellandaverde9360 2 года назад +4

    Thank you for this tutorial! I realized Z3Cubing’s tutorial was a bit too complicated for me, so I went here as I was on this channel for the 4x4 assembly video, and it was amazing! This tutorial was simple and easy. Would help new cubers to solve this cube. Thanks a lot!

  • @nanashinobu2516
    @nanashinobu2516 Год назад

    This is the only one tutorial which helped me to solve the puzzle! Many thanks👍

  • @გიორგიგეგეჭკორი-ყ2ლ

    man, before this video i wached like 5 or 6 videos and all of them were like chinise to me. i coudn't figure out what the heck were they saynd. then i came here, wached this tutorial and i got my first solbe. well of course i wached some places multiple times but im so happy now and i hope athers are too!

  • @BelgianSpeedcuber
    @BelgianSpeedcuber 4 года назад +2

    Very informative, and simple tutorial!! Thx :)

  • @KenStentiford
    @KenStentiford 4 года назад +4

    Nice 👍
    Never knew skewb was so basic, at a beginner level.
    Might have to buy one.

    • @Speedcubenz
      @Speedcubenz  4 года назад +1

      Easy to learn, hard to master 😂

    • @KenStentiford
      @KenStentiford 4 года назад +1

      @@Speedcubenz Yeah that's why I said beginner level. Advanced Skewb would blow my mind away 🤔

    • @Speedcubenz
      @Speedcubenz  4 года назад

      Same - big brains only!

    • @Hunni125
      @Hunni125 3 года назад

      I think you know where to buy it from :)

  • @dwyaneramos4208
    @dwyaneramos4208 4 года назад +2

    Thanks. Got an OcR with this.

  • @JL3156oi
    @JL3156oi Год назад

    Very nice , thank you for helping me solve the cube 😊
    You just earned a sub !😊

  • @Dorkcleaning122
    @Dorkcleaning122 4 года назад +4

    ok i went to the store and got my cube and lube, I love how you can try out cubes there! I got to try a gan cube for the first time!

    • @Speedcubenz
      @Speedcubenz  4 года назад +1

      Yo thanks so much for visiting! I’m glad you like it 🙌

  • @bk-10-10
    @bk-10-10 4 года назад +11

    Imagine watching j perm, z3cubing or tingman when u can watch this gold

    • @Speedcubenz
      @Speedcubenz  4 года назад +1

      IKR?

    • @Speedcubenz
      @Speedcubenz  4 года назад

      Imagine not being subscribed to Speedcube.co.nz tho... Go on, do it!

    • @bk-10-10
      @bk-10-10 4 года назад

      @@Speedcubenz I am already, aren’t I? Not being subscribed is like buying a Rubik’s cube when you could get a gan for the same price

    • @Speedcubenz
      @Speedcubenz  4 года назад

      @@bk-10-10 Yeah after I posted this I realised the difference between people who are publicly and privately subscribed 🤦‍♂️🤦‍♂️🤦‍♂️ Sorry for being an accusin' Susan!

    • @davidpotter7231
      @davidpotter7231 2 года назад

      BRO I KNOW THEM

  • @FrankyyCubez
    @FrankyyCubez 2 года назад

    Yay I can solve one now, can’t wait for solving it officially at SIC 2023!

  • @kirbaran2039
    @kirbaran2039 7 месяцев назад

    I sometimes have an error when I did step 2 and the cornerx were at the yellow spot yet everything else (besides white side) were unsolved. How do I fix that?
    EDIT: TH
    he cube isn't broken, when I scramble it it solves (except for this case)

  • @ShibbyFamily
    @ShibbyFamily Год назад

    This is a very good tutorial

  • @pratikkhanna3182
    @pratikkhanna3182 4 года назад

    Great Video for all new skewbers

    • @Speedcubenz
      @Speedcubenz  4 года назад

      Omg it’s Pratik! Thanks for watching :) 🙌

  • @128ajb_02_Music
    @128ajb_02_Music 2 года назад

    finally a method that worked

  • @rusk710
    @rusk710 3 года назад

    Thanks for this. You'll help me so much

    • @Speedcubenz
      @Speedcubenz  2 года назад

      No sweat, thanks for watching!

  • @avcuber6027
    @avcuber6027 3 года назад +1

    Such a good tutorial

    • @Speedcubenz
      @Speedcubenz  2 года назад +1

      Ayy thanks so much I'm glad you like it!

  • @tash_cash4902
    @tash_cash4902 2 года назад

    This was very helpful it was super simple gud job

    • @Speedcubenz
      @Speedcubenz  2 года назад

      You're so welcome, thanks so much for watching! Please smash the sub button for more :)

  • @Jakuras
    @Jakuras Год назад

    Thank you bro

  • @ashoktandel1
    @ashoktandel1 2 года назад

    So easy!! You are 99999 times better than jperm

  • @Fire_BoltX
    @Fire_BoltX 2 года назад

    Hello, I’m able to solve it except the center part can you make a video you on all cases on the centers

  • @saltyd2137
    @saltyd2137 Год назад

    Great video! It is the best tutorial for the Skewb. I just have one problem. I get the white side done. But when I turn the cube when the 2 yellow headlights to the right and I do the right down left down right up left up - I get two white corners out of place. A white pops up in the front left and the top left of the face to the left. that is white on bottom and the yellow if for the top .Help and Why? Thank you in advance!!

  • @jvs2uber466
    @jvs2uber466 4 года назад

    Editing is noice!
    What did you use to edit?

    • @Speedcubenz
      @Speedcubenz  4 года назад

      Just iMovie honestly!
      Graphics are done in Canva, filmed on an iPhone 11 plus a couple of cheap K-Mart lights! Pretty simple setup to be honest :)

    • @jvs2uber466
      @jvs2uber466 4 года назад

      @@Speedcubenz Wow! That’s pretty impressive. I’m not that great with iMovie 😅

    • @Speedcubenz
      @Speedcubenz  4 года назад

      It’s actually pretty powerful once you find all the secrets 😂 would like to upgrade at some point though.

    • @bk-10-10
      @bk-10-10 4 года назад

      @@Speedcubenz how is the voice so loud and clear? Mine just turns waay quieter

    • @Speedcubenz
      @Speedcubenz  4 года назад

      @@bk-10-10 Speak slowly and clearly, and in this setup the phone is quite close to my face so the mic picks me up well. Make sure the room is quiet, raise your vocal level in the edit and make sure the bg music is nice and low. I usually have music at 6 or 7% volume for example 🙌

  • @ViraTwistsPlastic
    @ViraTwistsPlastic 4 года назад

    Just ordered a Gan skewb

  • @fanaticfox9255
    @fanaticfox9255 2 года назад +1

    I think I have a special case with my skewb?

    • @Speedcubenz
      @Speedcubenz  2 года назад +1

      Nope - only if your skewb has been put back together wrong

  • @skonggirl
    @skonggirl 4 года назад +1

    Nice!

    • @Speedcubenz
      @Speedcubenz  4 года назад +1

      Thanks so much for watching!

  • @critJones
    @critJones Год назад

    I dont understand what it is, but this tutorial is lost on me lol. Im assuming Im holding the cube wrong or turning wrong lol

  • @accesscrimea
    @accesscrimea 5 месяцев назад

    Why do you call is a "side event". Its just an event, like any other, surely?! (Granted, the 3x3 is on a higher pedestal).

    • @Speedcubenz
      @Speedcubenz  5 месяцев назад

      It's common parlance in the community really. Not always clear where the line is but generally speaking the quicker, non nxn events are known as side events.

  • @Littlefish1239
    @Littlefish1239 Год назад

    Tysm

  • @tonidufrene5845
    @tonidufrene5845 3 месяца назад

    It didn't work for me, but it ALMOST DID 😂

    • @tonidufrene5845
      @tonidufrene5845 3 месяца назад

      Update: I DID IT! I SOLVED THE SKEWB WITH THIS METHODK

    • @tonidufrene5845
      @tonidufrene5845 3 месяца назад

      METHOD*
      (I can't edit on mobile)

  • @camerone779
    @camerone779 4 года назад

    EPIC VIDEO

  • @alilu14
    @alilu14 29 дней назад

    It dose not make sense?

  • @alexdandan2091
    @alexdandan2091 2 года назад

    I don’t get it?

  • @kingjdbcubing3963
    @kingjdbcubing3963 4 года назад

    I got a 7.69 average with beginner method at A new year in Auckland so it can't be that bad

    • @Speedcubenz
      @Speedcubenz  4 года назад +1

      Yo nice work! 🙌

    • @kingjdbcubing3963
      @kingjdbcubing3963 4 года назад

      @@Speedcubenz thanks I need to learn a better method but I,m to lazy

    • @Speedcubenz
      @Speedcubenz  4 года назад

      @@kingjdbcubing3963 Same lol

  • @rarapratama725
    @rarapratama725 10 месяцев назад

    YOU HAVE THE SAME SCRAMBLE LIKE ME BRUH😂😂

    • @Speedcubenz
      @Speedcubenz  10 месяцев назад

      Ha ha what are the chances?! 🤣

  • @kiwicuber
    @kiwicuber 4 года назад

    Yass!!! Is skewb fun?

    • @Speedcubenz
      @Speedcubenz  4 года назад +2

      I quite like it but I hate to WCA scramble it lol, that's the next skewb video I'll make I think!

  • @nougattruong
    @nougattruong 3 года назад

    Can you teach me slow

    • @ssshergo
      @ssshergo 3 года назад

      It was slow

    • @Speedcubenz
      @Speedcubenz  2 года назад +1

      I mean this was pretty slow, and don't forget to pause!

  • @rhylenn
    @rhylenn 3 года назад

    I don’t understand the algorithm

    • @Speedcubenz
      @Speedcubenz  3 года назад

      Watch it again, you'll work it out, I believe in you 🙌

  • @Uneak-Official
    @Uneak-Official Год назад +1

    bro this was no help be better at explaining things

    • @Speedcubenz
      @Speedcubenz  Год назад

      😂

    • @Uneak-Official
      @Uneak-Official Год назад

      @@Speedcubenz i was kidding i was mad that i’m bad at it excuse my rudeness😅

    • @baconsarny-geddon8298
      @baconsarny-geddon8298 11 месяцев назад

      ​@@Speedcubenz Not trying to be rude, but the guy is right; This video is really badly explained (don't take it personal; Seems to be a pattern with Skewb).
      At 7:15, you describe the alg as "down, down, up, up". (Which SOUNDS like you're saying "D2, U2"... which would make no sense... but thats what "down, down, up, up" means in normal notation, right?)
      But with each "down" move, you're rotating a different corner.
      The problem that NOBODY seems to explain, in ANY Skewb "how to", a very simple one- but one that never gets addressed.
      You come CLOSE (closer than any other Skewb guide, I've seen, tbh... But in the end, you don't actually explain it, either)
      Normal cube notation has SIX directions, right? "L,R,F,B, U and D"... Because cubes have 6 faces
      But the Skewb rotates around its CORNERS, not its faces, right?
      And it has EIGHT corners, not six?
      So how can normal notation, with only SIX directions, describe the corner-centred rotation of the Skewb, which has EIGHT degrees/directions of rotation?
      Maybe I'm just a complete idiot, and there's some super-obvious answer to this question, which I'm missing...
      ...but I suspect it's the above issue (and a few other, similar issues, raised by the skewb twisting around its CORNERS, rather than around its FACES, like most puzzles we're used to), which is why so many people get confused/frustrated by Skewb.
      The two big, fundamental questions nobody addresses are...
      1. Exactly how does normal notation apply, when the puzzle rotates around the CORNERS, instead of rotating around the FACES (like normal 3x3)?
      [Like, with 3x3 you hold the cube flat, with one face towards you, and it's OBVIOUS which face is "F" (the front one, facing you, duh...), and which is "U"... But with Skewb, you hold the cube the exact same way, and you now have FOUR corners which are all EQUALLY "front"... and another 4 corners, that are EQUALLY "up"...
      You see why noobs like myself find that confusing, right?]
      And (2) how does a notation system, which only has letters for SIX directions, work when you have EIGHT (corner-centred) axes' of rotation?
      Again, I'm not trying to be a prick- Just trying to clarify the stuff that a lot of us find confusing, which none of the "how to" guides seem to address...

  • @gladedood5089
    @gladedood5089 2 года назад

    this makes no sence

    • @Speedcubenz
      @Speedcubenz  2 года назад

      Nah it definitely works - watch again and you'll get it :) This is pretty much the simplest way to solve the skewb.

  • @alilu14
    @alilu14 29 дней назад

    It dose not make sense?