Inverter 12V to 220 from TV transformer | How to make

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • Inverter 12V to 220 from TV transformer | How to make
    Inverter 12V to 220 from TV transformer | How to make
    Inverter 12V to 220 from TV transformer | How to make
    Electricity is important for us. But sometimes we need electricity in emergency, like power outages, emergencies, camping, etc. With this inverter, we can use Car / motorcycle battery. This can increase the electricity from 12V DC to 310V DC, and this can turn on Light bulb, Phone Charger, and small consumption device.
    #inverter #12Vto220v

Комментарии • 127

  • @jailsonaraujo5766
    @jailsonaraujo5766 2 года назад +4

    this project is really cool to make an equal. my difficulty is just how will i know the correct thickness of the wire, other than that in 30 minutes the project is ready. But I'm going to do it in a different way, I'm going to use two ferrite transformers to increase the voltage, always taking care not to get a shock. a hug from your new subscriber here in Brazil

  • @avinashghalme8308
    @avinashghalme8308 4 года назад +4

    Sir i made this it is work properly 🙏😊☺☺😊

  • @PhdHung
    @PhdHung  5 лет назад +11

    Inverter 12V to 220 from TV transformer | How to make

  • @derekjeftha6479
    @derekjeftha6479 4 года назад +4

    Thanks Homemade , lots of good information here. Subscribed.

    • @PhdHung
      @PhdHung  4 года назад

      Thanks bro.

    • @kaludharajeeya
      @kaludharajeeya 2 года назад

      💓Wire gauge primary and secondary?👍

  • @balasubramanyancp882
    @balasubramanyancp882 Год назад +1

    It is good. But, without SCHMATIC DIAGRAM the connections are totally confused !

  • @a.k.m.manzurmurshed210
    @a.k.m.manzurmurshed210 2 года назад

    Nice

  • @smoke_stackz3168
    @smoke_stackz3168 4 года назад +1

    Can i use ready made zvs driver i ordered it online and ihave some tv ferrite transformer laying around

  • @Khalilkhan6120
    @Khalilkhan6120 3 года назад +2

    I used atx transformer and irfz44 instead of 3205 and 63v 150uf cap but one mosfet get to hot need help

    • @Khalilkhan6120
      @Khalilkhan6120 3 года назад +1

      I used atx transformer and irfz44 instead of 3205 and 63v 150uf cap but one mosfet get to hot need help

    • @sujeshroy1804
      @sujeshroy1804 2 месяца назад +1

      Same here, Did you solved the issue?

    • @Khalilkhan6120
      @Khalilkhan6120 2 месяца назад

      @@sujeshroy1804 no bro I think there is frequency problem.
      Frequency needs to be match.

    • @sujeshroy1804
      @sujeshroy1804 2 месяца назад +1

      @@Khalilkhan6120 I have tried every method but still not succed

  • @abrarswb
    @abrarswb 4 года назад +1

    What is the purpose of the air gap between the central leg of T/F , and why did you remove the air gap.

    • @f.a3202
      @f.a3202 4 года назад

      i think it has to do with the saturation point of the transformer. but I'm not completely sure about it

  • @muhammedchafi336
    @muhammedchafi336 5 лет назад +2

    hi dear friend i love all your videos please dont stop

    • @PhdHung
      @PhdHung  5 лет назад +1

      I will try, thank you for liking my video.

    • @GenesisElectric
      @GenesisElectric 5 лет назад

      @@PhdHung wire gages please

  • @nandeepkhajuria2326
    @nandeepkhajuria2326 4 года назад +1

    Bro please tell me what happen if I will increase the number of turns in primary side like 4-0-4 turns or 5-0-5 turns with same wire.

    • @f.a3202
      @f.a3202 4 года назад

      it will have higher resistance at higher frequencies but can work with lower frequencies. for example it can't work good at +80kHz but can work at 20-40kHz

  • @COFFY_GAMING
    @COFFY_GAMING 4 года назад +1

    Helo sir please reply me all the components you have used in the video.

  • @malikchandika5107
    @malikchandika5107 2 года назад

    I followed your instructions and its really working, but 1 mosfet is heating too much what will be the problem?

  • @manzoor-ul-haq
    @manzoor-ul-haq 3 года назад +1

    Sir
    I have many transformer of 12 v single
    Not 12+0+12
    Only 12v
    Give me the idea to make 220v inverter

  • @nandeepkhajuria2326
    @nandeepkhajuria2326 4 года назад +2

    Can I use this transformer in proper sg3525 35khz circuit

    • @PhdHung
      @PhdHung  4 года назад

      yes. Ok. U can use

  • @jephthahbassey736
    @jephthahbassey736 4 года назад +2

    Hello i tried to make it exactly as yours, but every time i connect transformers and battery to it the mosfet heats. please what could be the problem.

    • @f.a3202
      @f.a3202 4 года назад

      try another pwm driver circuit, or ic. the ic maybe fake and can't produce a good pwm signal. or try using other mosfets. the mosfets could be fake too. or maybe the transformer has reached its saturation point at which it draws so much current without much output! hope it helps

  • @kingofpaint9720
    @kingofpaint9720 5 лет назад +1

    good

    • @PhdHung
      @PhdHung  5 лет назад

      thanks for watching

  • @antoniovalentini8537
    @antoniovalentini8537 3 года назад

    Sei Bravissimo

  • @syawelciecie2077
    @syawelciecie2077 5 лет назад +2

    Please show schematic diagram

  • @vinu_Tronics
    @vinu_Tronics 2 года назад

    Most of the people here showing diode and dc capacitor in the output why don't you measure ac in the out

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl2023 5 лет назад +2

    Tenho enterece em comprar esse inversor me pace seu contato

  • @alejandromoreno8509
    @alejandromoreno8509 4 года назад

    Genio!!!

  • @Pilotfly2023
    @Pilotfly2023 4 года назад

    Hi!
    what is the thickness of the wire for the transformer,please?
    Renato França - Brasil

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl2023 4 года назад +1

    Qual é a espressura desses fios

  • @elsaydelgharib8841
    @elsaydelgharib8841 3 года назад +1

    It cannot be used for TV and laptops because too high frequency will damage the devices. Warning

  • @at190.corona2
    @at190.corona2 5 лет назад

    If you change the MOSFET into another number, you must change the value. r If you have to change the transformer, how to change the circuit?

  • @ClecianoSilvaKl2023
    @ClecianoSilvaKl2023 4 года назад +1

    Espessura desses fios

  • @driverunit6656
    @driverunit6656 5 лет назад +3

    Primary3*3 what m'm wire
    Secondary90turn what m'm wire

  • @junkingullie9865
    @junkingullie9865 3 года назад

    Can we make the same by d718 transistor?

  • @rolandruiz1972
    @rolandruiz1972 5 лет назад

    can i convert the dc output to ac using 4 mosfet? ive found that circuit on google transformerless inverter circuit

  • @pkkiidea2k175
    @pkkiidea2k175 4 года назад

    Kay mai is transformer ki jagah par mare paas ak fnd ka home theatar hai usme bhi asa hi transformer ha kay mai use kar shakta hu

  • @mukultechandhobby
    @mukultechandhobby Год назад

    Dear , How many mm wire do use in the transformer? Can you please tell me. Thanks

  • @lalitsokhal3278
    @lalitsokhal3278 4 года назад +1

    Sir mare pas microtek inverter 1115va e2+ ki controller ic M9S08SH4 mil nhi rhi... M eski jgh dusri ic konsi c lga skta hun.. Pls btay sir

  • @smallideabigresults5970
    @smallideabigresults5970 4 года назад +1

    Can use IRF640N MOSFETS

  • @ashli6491
    @ashli6491 4 года назад

    I try using 987ohms resister cause I do not have any 470ohms and the transmission was very bad everything get super hot a d wasn't even convertering DC to ac I used irf1404 not work is just irfz44 only this circuit work with

    • @alexilongs
      @alexilongs 4 года назад

      You can use any N-channel mosfet

  • @nandeepkhajuria2326
    @nandeepkhajuria2326 4 года назад +1

    Does the transformer produces noise when load

    • @PhdHung
      @PhdHung  4 года назад +1

      No, it is silent

  • @ajuwinfly8272
    @ajuwinfly8272 2 года назад

    Can used led bulb 230v 🤔

  • @adewaleafis6343
    @adewaleafis6343 4 года назад +1

    Sir what are the mm used for both PRI.and sec.?

    • @PhdHung
      @PhdHung  4 года назад +1

      This video is old, I don't remember, but about 0.85mm

    • @zeninhosantana6869
      @zeninhosantana6869 3 года назад

      @@PhdHung
      good night teacher i really want to do this reverse for my use it would be possible to pass to me the shape that the ferrite swallow is rolled and how many millimeters is the copper wire.. Imail zeninho20000@gmail.com

  • @vijaykumar-fb6yp
    @vijaykumar-fb6yp 3 года назад

    how many amp. take when i connect 100watts bulb

  • @vinu_Tronics
    @vinu_Tronics 2 года назад

    All inverters are dc or ac

  • @gabrielluna1207
    @gabrielluna1207 5 лет назад +1

    Pregunta podria prender un televisor

  • @dharmeshvadhiya3072
    @dharmeshvadhiya3072 5 лет назад +2

    24v DC invetar keshe banaye

    • @malikamir2429
      @malikamir2429 5 лет назад

      24 volte inviter kiss bniue 2000wat

  • @jaisingrajepawar243
    @jaisingrajepawar243 4 года назад

    Sir why battery wire are burning ?

  • @azharmasali3726
    @azharmasali3726 3 года назад +2

    What is the voltage at 1 turn

  • @extremeaudio8975
    @extremeaudio8975 4 года назад

    Sir what is wire mm size of primary and secondary?

  • @extremeaudio8975
    @extremeaudio8975 4 года назад +1

    Sir can use 0.7mm vire?

  • @MdRashed-ye5fp
    @MdRashed-ye5fp 4 года назад +1

    What's use ware mm?

    • @PhdHung
      @PhdHung  4 года назад

      This video is outdated, please see the info in the video, because I don't remember the value

  • @berman9668
    @berman9668 4 года назад

    beautuful video , this case not need plane , i like to much . you use two condensador for made britget diode???? is posibly??? please answer to me, when your project is easy i not need plane when is more dificult i like plane i am happy , teacher , greating for Spain.

  • @luiscarlosmarques3946
    @luiscarlosmarques3946 2 года назад

    Trafo from 29 pol Samsung tv

  • @pkkiidea2k175
    @pkkiidea2k175 4 года назад

    Ye transformer kaha par hota hai please batao

  • @kanhayadaw001
    @kanhayadaw001 3 года назад

    Can I get its circuit diagram

  • @Nanjillavivasayam
    @Nanjillavivasayam 5 лет назад +1

    Hello sir this is Ac inverter or Dc inverter?

    • @PhdHung
      @PhdHung  5 лет назад +1

      it is DC inverter.
      12V to 220V AC sine here : ruclips.net/p/PLrUmD1zEzCjNVgChpHzHeTNLvzBlSOqiz

  • @f.a3202
    @f.a3202 4 года назад

    what will happen if i don't close the transformer air gap

    • @PhdHung
      @PhdHung  4 года назад

      The mosfet will heat up quickly and..... Bommmm

  • @ahmadalsmady
    @ahmadalsmady 4 года назад +1

    lamp 100w 😂

  • @vinu_Tronics
    @vinu_Tronics 2 года назад

    One doubt I'm new here

  • @bagussuharianto5987
    @bagussuharianto5987 9 месяцев назад

    Sekema nya gimana itu

  • @asims6580
    @asims6580 5 лет назад +1

    Ap ka 12v Dc waer wrong . Everything is ok ○k

  • @bgcharuka1400
    @bgcharuka1400 2 года назад

    Plzz diagram

  • @marcelomunoz7822
    @marcelomunoz7822 4 года назад

    Cuantas vueltas sería para 120v

  • @aboahmedalbadawy8410
    @aboahmedalbadawy8410 4 года назад +3

    Can i use IRFZ44???

    • @PhdHung
      @PhdHung  4 года назад +2

      yes. u can

  • @reviewquotes1310
    @reviewquotes1310 5 лет назад +1

    what wire size is mm??

  • @Ninja666.
    @Ninja666. 3 года назад

    Circuit????

  • @TheJavaSync
    @TheJavaSync 5 лет назад +1

    17:05 - how to get 235v - what should be change?

    • @PhdHung
      @PhdHung  5 лет назад +2

      Reduce the number of turns

  • @abelpalomino2125
    @abelpalomino2125 2 года назад

    diagrama

  • @rolandruiz1972
    @rolandruiz1972 5 лет назад

    how many watts?

  • @chiruchaitanya4353
    @chiruchaitanya4353 5 лет назад +1

    RUINED MY DAY....😠😠😍😍😍😍😍😍

  • @herisutrisno303
    @herisutrisno303 3 года назад

    Pakek kawat ap

  • @alexilongs
    @alexilongs 4 года назад

    Is it possible to stun fish

    • @PhdHung
      @PhdHung  4 года назад +1

      need a few more components. High frequency voltages cannot stun fish.

    • @alexilongs
      @alexilongs 4 года назад

      @@PhdHung ok thanks for your info

  • @danielcorrea180
    @danielcorrea180 5 лет назад

    show diagram

  • @agoesjoy158
    @agoesjoy158 4 года назад

    Elco not this remark

  • @zeinexplore5604
    @zeinexplore5604 4 года назад +1

    what is the frequency of the device, please let me know

    • @PhdHung
      @PhdHung  4 года назад +1

      ~ 15KHZ

    • @zeinexplore5604
      @zeinexplore5604 4 года назад +2

      thank you now I already know the frequency of the device that I made, is it really safe for a laptop charger

    • @PhdHung
      @PhdHung  4 года назад +1

      You need diode bridge and capacitor.

    • @zeinexplore5604
      @zeinexplore5604 4 года назад +1

      how many micro farads for elco are needed and how many volt RMS diodes

    • @EEEProjectSolutions
      @EEEProjectSolutions 4 года назад

      @@zeinexplore5604 can you give me diagram which you made. Actually i also need for laptop charger.

  • @ramshrestha1424
    @ramshrestha1424 2 года назад

    send facebook name sir?

  • @rustandicreative3017
    @rustandicreative3017 5 лет назад

    Menggunakan kawat berapa mm

  • @agusriadixc1703
    @agusriadixc1703 5 лет назад

    👍

  • @MrNirvana8987
    @MrNirvana8987 5 лет назад

    hello friend, I rewound a similar transformer (the primary with 6-0-6 turns the secondary 90 laps) for a converter 24 DC to 380 DC but the transformer sounds strange and the mosfet are heated and burned, can you help me please!

    • @therider3939
      @therider3939 5 лет назад

      Try Checking the frequency if its too low lets too much current pass

    • @MrNirvana8987
      @MrNirvana8987 5 лет назад

      @@therider3939 Thanks friend for the advice.
      What would be the correct frequency?

    • @therider3939
      @therider3939 5 лет назад +1

      @@MrNirvana8987 try starting with 50khz if the inductve reactance is low you can burn the mosfets and the transformer gets too Hot. The higher the frequency the lower the current you can put 50khz then try to tune it from there

  • @larkanasolar8297
    @larkanasolar8297 5 лет назад +1

    Nice