Building a 2000HP COYOTE for our 4WD TRUCK! (How the FASTEST Coyotes are Made)

Поделиться
HTML-код
  • Опубликовано: 27 фев 2024
  • Building a 2000HP COYOTE for our 4WD TRUCK! (How the FASTEST Coyotes are Made)
    Special thanks to our sponsors
    Real Street Performance ➤ www.realstreetperformance.com/
    Platinum Racing Products ➤ www.platinumracingproducts.com/
    Manley Performance ➤ www.manleyperformance.com/
    TRC Gear ➤ thatracingchannel.com/
    Facebook ➤ / thatracingchannel
    Instagram ➤ / thatracingchannel
  • Авто/МотоАвто/Мото

Комментарии • 170

  • @OllieBeanz421
    @OllieBeanz421 5 месяцев назад +103

    This must have been what it was like when the original 2jz came into existence and people found they cab tune them to the moon. These f150s have been taking off! Literally!!

    • @CoyoteFTW
      @CoyoteFTW 5 месяцев назад +12

      Except this is better than the 2jz been out little over 10 years and it’s in 5’s … 2jz took 30 years to do that

    • @Contreras-z4e
      @Contreras-z4e 5 месяцев назад +3

      2j’s took a long time to get it done Coyote did it way faster

    • @freedomfox8183
      @freedomfox8183 4 месяца назад +7

      ​@@CoyoteFTWlet's be honest they didn't have the technology we do now back then or they would have went a lot faster than they did

    • @aimxdy8680
      @aimxdy8680 4 месяца назад +3

      @@freedomfox8183Lmao ford hit 5s way faster in the 4.6 and 5.4 lmao.

    • @ralph02136
      @ralph02136 4 месяца назад +3

      @@Contreras-z4e ⁠because one is a six cylinder and the other has eight. It would be more of a disgrace if any of the American v8s, which are modified year after year to race for decades, can't beat an age old six cylinder engine

  • @D.MONEY_
    @D.MONEY_ 5 месяцев назад +26

    Midnight performance got the f150 “work truck” platform booming right now

  • @nicholaswandtke1332
    @nicholaswandtke1332 5 месяцев назад +24

    Man, what a great shop! The dudes at FFRE are top notch. Great vid Javier. Can't wait to see "work truck" run on the new setup. She's gonna hurt a lot of feelings lol.

    • @ThatRacingChannel
      @ThatRacingChannel  5 месяцев назад +4

      Hell yeah man! Can’t wait to show you guys the next steps!

  • @xm3ntal620
    @xm3ntal620 5 месяцев назад +17

    Love the attention to detail and methodical nature of the engine assembly guy

    • @jamesworkman686
      @jamesworkman686 5 месяцев назад +2

      That’s what got him his spot building these hundred thousand dollar engines

    • @xm3ntal620
      @xm3ntal620 5 месяцев назад +1

      @@jamesworkman686 for sure I would definitely want him to build my engine if I ever wanted to pony up for one of these

  • @PhillyDee215
    @PhillyDee215 5 месяцев назад +40

    That truck is gonna be fast...it's already ridiculously fast lol

  • @jackflash6377
    @jackflash6377 5 месяцев назад +15

    Kudos to the assembler.
    Worked on Porsche for over 12 years and his technique and attention to detail reminded me of how we built Porsche engines. Super clean, super accurate and with high attention detail.

    • @Dillon000
      @Dillon000 4 месяца назад +1

      Did you like working for Porsche?

    • @jackflash6377
      @jackflash6377 4 месяца назад +1

      @@Dillon000Just to be clear I did not work for Porsche, I worked at an independent shop specializing in Porsche. Nine Eleven Enterprises in Dallas.I really enjoyed working on Porsche, BMW and Mercedes. It's a joy to work on something so well engineered and it fit my personality. Meticulous and perfectionist. I had a strong background in electronics and that, along with my personality, made me a good match for German cars. The owner was quite pissed when I gave my notice. I went back to college and got my electronics degree and went on to work for major oil companies doing automation and satellite communications. Retired from that and invented a product that helps cool CPUs.

  • @jimmymccormick142
    @jimmymccormick142 5 месяцев назад +13

    Great video as always l have been wanting to see someone build a coyote those little motors are unbeatable

    • @wizza2315
      @wizza2315 5 месяцев назад +6

      They are definitely the best platform in the game right now!

  • @reas0n555
    @reas0n555 5 месяцев назад +17

    People are just now getting coyote f150’s to race .. I’ve been doing it with a 6r80.. those ten speeds are insane

    • @RadDadisRad
      @RadDadisRad 5 месяцев назад +9

      I was racing my upgraded turbo 2014 ecoboost back in 2016. I would race it on the street while pulling a Triton aluminum trailer with an aluminum Jon boat with a boat tarp on it. Trailer and boat weighed 300 pounds. Made for some hilarious runs tho. Put it in 4wd at a light and let it eat with a foot brake boosted launch.

    • @Dirkadew
      @Dirkadew 5 месяцев назад

      Congrats

    • @dj4monie
      @dj4monie 5 месяцев назад

      Welcome to 2010 or something

    • @LongBodyCobraa
      @LongBodyCobraa 4 месяца назад

      Difference is they have media coverage and you don’t , plus the world doesn’t revolve around you

  • @IamBlackMagic03
    @IamBlackMagic03 3 дня назад

    Just ordered a 2024 f150 single cab w/10 speed in antimatter blue. I cant wait till its built. Already own a TT 03 cobra, pro charged 92 gt, and 2015 whippled gt. The f150 gonna be the new daily.

  • @HoldPublicPigsResponsible
    @HoldPublicPigsResponsible 5 месяцев назад +29

    Once again coyote platform is king

    • @markbrouk7857
      @markbrouk7857 4 месяца назад +1

      LS Bois be like, "but I can make 600hp flywheel on spray with a junkyard build!".....yeah make 2000

    • @davidincognito7285
      @davidincognito7285 4 месяца назад

      ruclips.net/video/Za69f0tv7mE/видео.htmlsi=ZxV1meeTp1P0wwtY

    • @hacklaurent9412
      @hacklaurent9412 4 месяца назад +3

      @@markbrouk7857lol theres ls and lts out there with 2000+, people have preferences dude. Worst engine to build is them damn hemi pos

  • @megaboom69
    @megaboom69 5 месяцев назад +11

    Coyote work truck 🤘

    • @wizza2315
      @wizza2315 5 месяцев назад +2

      Sheetrock by day and drag by night lol

  • @Petethedeadboy
    @Petethedeadboy 5 месяцев назад +4

    High hp engine building is truly an art. ❤

  • @B49nope
    @B49nope 5 месяцев назад +4

    TRC does some of the best RUclips content.

    • @ThatRacingChannel
      @ThatRacingChannel  5 месяцев назад +1

      Thanks for watching, we truly appreciate it! 🤙

  • @IAMREIKI
    @IAMREIKI 4 месяца назад

    Nice work Mr Engine Builder . Your building engines creates a foundation to our passions dreams of the Power of a Motor .
    Nice video .
    Thanks

  • @KC-ug4zn
    @KC-ug4zn 5 месяцев назад +6

    Love this!

  • @JaredS23
    @JaredS23 5 месяцев назад +8

    When it comes to coyotes, I’d say Real Steet has it figured out 😂

    • @dj4monie
      @dj4monie 5 месяцев назад

      Lots of others have "figured it out" it's still a modular engine.

    • @JaredS23
      @JaredS23 5 месяцев назад

      @@dj4monie Brett has won sick week last 2 years now in snot rocket. It’s not hard to understand, it’s just a gtr engine with 2 more cylinders but to do what he’s doing is beyond that

    • @theclinchmma4126
      @theclinchmma4126 5 месяцев назад

      @@dj4monie i saw u comment this dumb shyt on someone elses comment. u sound salty af!!

  • @whalehands
    @whalehands 4 месяца назад +1

    I just bought a 2020 with the 5.0L. I love it!

  • @douchedidit9222
    @douchedidit9222 5 месяцев назад +11

    Coyote changing the game

    • @dj4monie
      @dj4monie 5 месяцев назад +1

      Still a Romeo plant Modular engine....

    • @LongBodyCobraa
      @LongBodyCobraa 4 месяца назад +1

      @@dj4moniewho cares

    • @jacobgodfrey8164
      @jacobgodfrey8164 4 месяца назад +3

      @@dj4moniethat shits on LS

    • @fordnut4914
      @fordnut4914 4 месяца назад +1

      And stomping out the turd ls😂​@@dj4monie

    • @champspec
      @champspec 4 месяца назад

      It only took Ford 25 years to catch up! Its about damn time!

  • @swift__
    @swift__ 5 месяцев назад

    Hell Yea🤘🏼🤘🏼💨 thing is going to be an absolute nightmare on the streets😈

  • @rickqueen65
    @rickqueen65 5 месяцев назад +2

    A lil TLC for TRC! I like it.

  • @AdinSLaboy
    @AdinSLaboy 5 месяцев назад

    Great video that was dope 👌 👏

  • @AJUSA1
    @AJUSA1 5 месяцев назад

    Awesome video. Great to see inside the laid of legends

  • @BadgerGT500
    @BadgerGT500 5 месяцев назад

    Awesome video!

  • @DAV4WSR1
    @DAV4WSR1 5 месяцев назад +1

    CRASY !!! farmer car, faster then supercar ^^ ahah . good machining job !!!

  • @sidbobby3233
    @sidbobby3233 5 месяцев назад

    Proper engine builder

  • @gargoylekingGWO
    @gargoylekingGWO 4 месяца назад

    Amazing 😊

  • @evanhi450
    @evanhi450 5 месяцев назад

    Impressive engine builders

  • @jackbuildsit
    @jackbuildsit 5 месяцев назад +1

    It’s was so cool to see this thing rip down the runway

  • @wizza2315
    @wizza2315 5 месяцев назад +2

    Omg that truck is so freaking NASTY already! Cannot wait to see the final product of this build! #CoyoteTakeover 🔥
    #FordPower 🔥

  • @CoyoteSwapEverything
    @CoyoteSwapEverything 4 месяца назад +1

    coyote is king💨💨

  • @RealSVTJunkie
    @RealSVTJunkie 5 месяцев назад

    Joe is top notch

  • @user-xb5zs2gr4h
    @user-xb5zs2gr4h 2 месяца назад

    ❤😂🎉🎉🎉🎉😢😮😮😅😅😊😊😊😊😊😊😊😊😊 bro you did it damn good fantastic job on that engine of the coyote. I wish I had a coyote in my focus, but I don’t have the time where the money I seen one in the focus. It was Hella fast. It was a Mustang motor from red Mustang. Take care. Have a good weekend. You doing damn good work. Keep it up.

  • @rebel9838
    @rebel9838 5 месяцев назад

    10:20 the word/s you're looking for is "stock room" or "Receiving room " you are WELCOME ¡!¡!¡!¡ LOL JK

  • @RadDadisRad
    @RadDadisRad 5 месяцев назад +13

    I want to do a FFRE engine but the problem is nothing else in the drivetrain lives at those crazy power levels.

    • @sneezinhatch
      @sneezinhatch 5 месяцев назад +2

      As far as what a f150 with twin 68 70s puts down 1680 whp, just built transmission stage 2 axles and drive shaft motor just has supporting mods. Midnight performance is best to talk to he runs stock axles built trans diff brace

    • @RadDadisRad
      @RadDadisRad 5 месяцев назад +9

      @@sneezinhatch that transmission isn’t going to live but a couple hundred passes at most. It is what it is. That’s why I’m staying at a modest 10-11 psi. Not making too much power.

    • @antilagboostaddiction8322
      @antilagboostaddiction8322 5 месяцев назад +10

      ​@@sneezinhatchCleetus broke his built transmission with just 1100hp that's why all midnight performance big builds all run T400s

    • @danmyers9372
      @danmyers9372 5 месяцев назад

      @@antilagboostaddiction8322- And broke the snout off the crank. Big power will always find the weakest point.

    • @2JZLS
      @2JZLS 5 месяцев назад

      GR1500 T56 - RPS quad? 💀

  • @Contreras-z4e
    @Contreras-z4e 5 месяцев назад

    How they put the sleeves in is crazy

  • @mytruthslays1303
    @mytruthslays1303 5 месяцев назад +2

    How are they made? You send them to midnight performace.

  • @user-gw6qn6pr6d
    @user-gw6qn6pr6d 5 месяцев назад

    Good job man I will pay you any time for work u do ..

  • @user-xb5zs2gr4h
    @user-xb5zs2gr4h 2 месяца назад

    ❤😂🎉🎉🎉🎉😢😮😅😅😅😅😊😊😊😊😊😊😊😊 congratulations on the coyote bill. I’m glad someone knows how to build one that kicks Camaros ass and Corvettes ass and Ferrari‘s ass truck is so bad ass. It is sweet. Keep up the good work with those coyote motors. There’s some damn good motors in those cars and trucks for the Ford Mustang in the trucks

  • @michaelw.5921
    @michaelw.5921 3 месяца назад

    What did you have to do to the axles and transfer case to handle this power?

  • @patrickkennedy2533
    @patrickkennedy2533 5 месяцев назад

    Roll Cage Brothers !!!!!!!!!

  • @info1418
    @info1418 5 месяцев назад

    I love how its mandatory to wear a hard hat while racing it 😂

  • @pafsrh4744
    @pafsrh4744 5 месяцев назад

    so whats the reason for the oil squirter block offs?

  • @robg2732
    @robg2732 4 месяца назад

    What suspension mods are you running?

  • @user-xb5zs2gr4h
    @user-xb5zs2gr4h 2 месяца назад

    ❤😂😢🎉🎉😮😅😊 coyote built I’m glad someone’s doing good with that for Ford. That truck is 2000 hp shit and it’s four-wheel-drive. That damn thing is bad ass.

  • @RadDadisRad
    @RadDadisRad 5 месяцев назад +2

    FFRE is in a difficult spot. They make the best coyote engines but now everyone wants one.

    • @wizza2315
      @wizza2315 5 месяцев назад +3

      TKM and MMR are pumping out some rowdy coyotes as well!

    • @RadDadisRad
      @RadDadisRad 5 месяцев назад

      @@wizza2315 mmr is the top dog. They have a 349ci 4000hp motor

  • @obsyon7148
    @obsyon7148 4 месяца назад

    The new whipple f150 5.0 10 speed 4x4 are the best !

  • @raymond80hr
    @raymond80hr 5 месяцев назад

    why block off the piston oilers?

  • @rickybobby4017
    @rickybobby4017 5 месяцев назад +3

    Just curious whats a stock predator engine block rated for

    • @ThatRacingChannel
      @ThatRacingChannel  5 месяцев назад +1

      FFRE has pushed them to the 3000whp range

    • @rickybobby4017
      @rickybobby4017 4 месяца назад

      @@ThatRacingChannel that's impressive 🤙🤙🤙

  • @Final_Boss_Racing
    @Final_Boss_Racing 5 месяцев назад

    Did you guys use the stock Boss 302 crankshaft or opt for the Callie’s crankshaft?

    • @ThatRacingChannel
      @ThatRacingChannel  5 месяцев назад +2

      Factory crank, guys are running stock crank all the way to 2000+whp

    • @Final_Boss_Racing
      @Final_Boss_Racing 5 месяцев назад +1

      @@ThatRacingChannel I was wondering I know alot of people have been saying “oh if you wanna go over 1,500 whp you’ve gotta have a aftermarket crank” Brett was stilling using the factory crank up to 2,500 whp right?

  • @Brandon_Gray
    @Brandon_Gray 5 месяцев назад +9

    Gonna need a Midnight Performance built 10r80 transmissions this bitch gonna be ready to roll out 💪 unless you’re goin TH400 swap atleast

    • @gtellez1990
      @gtellez1990 4 месяца назад

      th400 is the move, it just limits you to who is willing to race you.

  • @RunWhatYaBrung
    @RunWhatYaBrung 5 месяцев назад

    💜

  • @StuckDawg
    @StuckDawg 4 месяца назад

    Ive got a 2016 F150 pushing 1000hp and I just blew my 6R80 up...what do I go with next and who produces the best trans?

    • @renedl22
      @renedl22 4 месяца назад

      Power by the Hour or Midnight Performance

  • @mustangbill4147
    @mustangbill4147 5 месяцев назад

    I need one of them blocks

  • @dannyweathersby2135
    @dannyweathersby2135 4 месяца назад

    I have A.
    F150 Ford truck 20185.0 love it.

  • @andres.Ramirez661
    @andres.Ramirez661 3 месяца назад

    You might wanna Race Midnight Performance 😈 he’s one of the top dawgsssss

  • @David-er1cy
    @David-er1cy 4 месяца назад +2

    What happened to sealed coyote engines making 2,000 lmao

    • @triston2735
      @triston2735 4 месяца назад

      No one claims a stock coyote will hold 2k hp. Will it make it for a few seconds to do a glory dyno pull? Probably

    • @svtpower03
      @svtpower03 26 дней назад

      Nobody has ever claimed that dumbass lol.

  • @pearlguy6351
    @pearlguy6351 5 месяцев назад

    Should be called truck racing channel

  • @bradcross2
    @bradcross2 5 месяцев назад +2

    why do they block off the oil squirters for pistons ?

  • @jesusmorales1214
    @jesusmorales1214 5 месяцев назад

    You should race midnight Performance they are the ford people to be they make the best ford trucks ever made

  • @Mr318live
    @Mr318live 5 месяцев назад

    Love the coyote but such a big engine to swap into a smaller car

    • @mytruthslays1303
      @mytruthslays1303 5 месяцев назад +1

      And?

    • @fread51
      @fread51 5 месяцев назад

      Not if you have the right fan shop

  • @waynemcfarland4143
    @waynemcfarland4143 5 месяцев назад

    That escalated quickly.

  • @Deuceblank
    @Deuceblank 5 месяцев назад

    How much are those race engines?????

  • @fread51
    @fread51 5 месяцев назад +6

    Who the hell is going to race that truck at 2,000hp they can't beat now with a whipple 😂

    • @ThatRacingChannel
      @ThatRacingChannel  5 месяцев назад +5

      Well to be fair, the engine is capable of 2000 but we will probably run it around 1500 to 1600 or so 😆💪

    • @danmyers9372
      @danmyers9372 5 месяцев назад +1

      @@ThatRacingChannel- The mods needed to make the truck live at that power level will probably cost more than the engine. Tranny, driveshaft, rear differential, axles, transfer case, upgraded struts. And those are just the main items. Frame and chassis upgrades?

    • @dj4monie
      @dj4monie 5 месяцев назад

      The truck is still heavy despite being aluminum. Other platforms are AWD as well. The appeal of this is the cost since a new truck would be less than $30k after incentives and negotiation. Especially with trucks, never pay MSRP depending on the time of year they will give them away to say they are the sales leader.

  • @list3723
    @list3723 3 месяца назад

    How much does this cost?

  • @sumplepurple92
    @sumplepurple92 2 месяца назад

    Looks like Angel "el flaco's" truck

  • @albaro08a
    @albaro08a 21 день назад

    Stupid question but do these get a mustang and get swapped or what's the case ?

  • @dailylife3975
    @dailylife3975 5 месяцев назад

    If I had the money that's who I would have build my coyote

  • @Contreras-z4e
    @Contreras-z4e 5 месяцев назад

    Dude they make the engines for the code Red those are heavy duty engines

  • @user-fc7ij3cj6j
    @user-fc7ij3cj6j 4 месяца назад

    Get a midnight transmission and you’ll be fine!!

  • @trappking8626
    @trappking8626 4 месяца назад +1

    Bruhh no cap some of these races are easy af get some real competition

  • @Green_Streets
    @Green_Streets 5 месяцев назад

    TH400 is the next mod!

  • @minibikemadman
    @minibikemadman 5 месяцев назад

    no predator block?

    • @modmatt89coupe
      @modmatt89coupe 5 месяцев назад

      Did you watch it's not needed. They have never broke a gen 3 block

  • @markoz673bajen8
    @markoz673bajen8 5 месяцев назад

    2005 Ford GT3000 please

  • @user-gw6qn6pr6d
    @user-gw6qn6pr6d 5 месяцев назад

    If I only had money for one I will love f 150 lifted so get on it people I'm getting to old can't wait forever

  • @Angry-Little-Fish
    @Angry-Little-Fish 2 месяца назад

    I’m trying to get my super crew truck to hit 1000HP

  • @wakeboardpro93
    @wakeboardpro93 5 месяцев назад

    an LS could never.....

  • @stevie9361
    @stevie9361 5 месяцев назад

    How to get on your channel? Like show our cars

  • @ianhowe007
    @ianhowe007 5 месяцев назад

    Dude bro...

  • @gv2505
    @gv2505 5 месяцев назад +1

    race cletus

  • @pafsrh4744
    @pafsrh4744 5 месяцев назад

    ineed that

  • @davecaresforyou7606
    @davecaresforyou7606 4 месяца назад

    2000 hp???? What in the world?

  • @k3rupt_
    @k3rupt_ 5 месяцев назад

    2000+ HP with steel rods😳
    No wonder they rate it at 1500hp lol,
    Throw some aluminum rods in that thing and send it!

  • @jdmmike7225
    @jdmmike7225 5 месяцев назад +2

    Ah yes, the 8 cylinder VR38 LOL. Gonna be a beast.

    • @xavierruiz7804
      @xavierruiz7804 5 месяцев назад

      😂😂

    • @RadDadisRad
      @RadDadisRad 5 месяцев назад +6

      Not even remotely similar

    • @jdmmike7225
      @jdmmike7225 5 месяцев назад

      @@RadDadisRad Not even remotely true with that statement, but it's okay.

    • @RadDadisRad
      @RadDadisRad 5 месяцев назад +6

      @@jdmmike7225 you’re right, they both are DOHC, have timing chains, pistons and a crankshaft. That’s the extent of the similarities. The coyote is an evolution of the mod motor. The mod motor has been around much longer than the VR38 has. The cam timing systems are different the the VR38 has VVT the coyote has VCT

    • @jdmmike7225
      @jdmmike7225 5 месяцев назад

      ​@@RadDadisRad Have you seen them apart next to each other? Their architecture are very similar, way more robust than the old 4.6 & 5.4 Mod motors. If you really take a look they have so many design similarities slightly tweaked to be called it's own.

  • @rebel9838
    @rebel9838 5 месяцев назад

    #336 viewer lol

  • @hyper8545
    @hyper8545 5 месяцев назад

    Rip trans

  • @user-xb5zs2gr4h
    @user-xb5zs2gr4h 2 месяца назад

    ❤😂🎉😢😮😮😅😊😊😊 no bro just do all Forge forget the GTR and the Lamborghini the Ferraris. I thought you were all Ford I guess not oh well.

  • @user-ye3jp3lx8h
    @user-ye3jp3lx8h Месяц назад

    По версии Богдановых, вы испортили мотор

  • @MultiFishslayer
    @MultiFishslayer 5 месяцев назад

    wow way to copy Cleetus Mcfarland

  • @Clu3sGarage
    @Clu3sGarage 5 месяцев назад

    First

  • @jonman2279
    @jonman2279 4 месяца назад

    Copying cleet

  • @ryankosciesza5295
    @ryankosciesza5295 5 месяцев назад +1

    Why not do a billet block aluminum rods?? If you're goingvto build a high hp motor you should over build it so you have room to grow in the future.

    • @dougn6465
      @dougn6465 5 месяцев назад

      $$$$$ $2k HP ain’t enough?

    • @wizza2315
      @wizza2315 5 месяцев назад

      Big money but I get your point

  • @jdirt1982
    @jdirt1982 5 месяцев назад

    I like to polish my Crank

  • @ChadMichael33
    @ChadMichael33 Месяц назад

    I want one. My new work truck. I’ll just write it off…. Fuck the government….

  • @grahamhill3106
    @grahamhill3106 5 месяцев назад

    The obvious match up... @CleetusM

  • @user-xb5zs2gr4h
    @user-xb5zs2gr4h 2 месяца назад

    ❤😂🎉🎉🎉🎉😢😮😅😅😅😅😊😊😊😊😊😊😊😊 congratulations on the coyote bill. I’m glad someone knows how to build one that kicks Camaros ass and Corvettes ass and Ferrari‘s ass truck is so bad ass. It is sweet. Keep up the good work with those coyote motors. There’s some damn good motors in those cars and trucks for the Ford Mustang in the trucks