I restored a set of eight pane windows using techniques I learned from watching your videos. It took many hours but they came out beautiful. My contractor was blown away and said they were nicer than he could have done. Thanks for the great content.
I had a hell of a time glazing my (4) 70’s original single pane Anderson basement windows I repaired from rotting, I rebuilt a sash from scrap cedar I had by mimicking the rotted sash, etc. and then I painted with strong exterior oil based Sherwin-Williams brand primer which I love!!! And then I studied up on glazing and how to… I suck! And I can’t find Sarco’s brand locally anywhere and with fall coming I don’t have time for Amazon to f up and send it late. So I tried the dapp 33, it’s very sticky so I took my gloves off and that helped after working it in but my windows are in place and I tried tooling which isn’t bad until I gave to lift up to change positions of my hand where it then lifts off the glass or my corners are horrendous. I have rain coming so I’m using the purple insulation foam board to cover my vulnerable windows but still I’m so pissed I can’t get it! I’ve learned how to plumb, electrical, I’m passionate about woodworking and the true authentic old school joinery not stupid pocket hole quick building lol but I don’t get this! It’s not probably the worst glazing job but I’m tempted to scrape it all out and try again in better weather 🤦🏻♀️
Hi Steve. I'm replacing the glass in a bottom sash like the one in this video. I have the sash down to bare wood. When I measure for replacement glass do I include the depth of the channel the glass slides into? What is the best way to get this measurement? Thanks!
Hey there thanks for asking. You do include that measurement up into the channel for the replacement glass. Best way I know to get this measurement is to add a 1/4”, because that’s how deep the channel usually is. To be safe you could add 3/16”. The goal is for it to slide up in there. If the glass does that, then you are good. Another thing to consider is that your end measurement should resemble an even number in most cases.
So all window glazing face the outside of the home and when I look at the manufacturer website for multiglaze type m it says for indoor use only. If you want to glaze outdoor windows it states to use dual glaze from the same manufacturer. The difference of the two is that like you said type m will skin over and you can paint in two days but the dual glaze takes 2 weeks. I'm confused about why multiglaze states for indoor use only.
I usually don't like music in instructional videos but this works wonders on my brain. Classical music and you can clearly hear Steve's voice. I could watch this video 20 times. 😊
I restored a set of eight pane windows using techniques I learned from watching your videos. It took many hours but they came out beautiful. My contractor was blown away and said they were nicer than he could have done. Thanks for the great content.
That’s awesome and really nice to hear. Thank you for speaking up and letting me know. It’s like fuel that makes it worth the effort.
Love your videos, but the background music is distracting. Maybe my ADD is kicking higher than usual.
I had a hell of a time glazing my (4) 70’s original single pane Anderson basement windows I repaired from rotting, I rebuilt a sash from scrap cedar I had by mimicking the rotted sash, etc. and then I painted with strong exterior oil based Sherwin-Williams brand primer which I love!!! And then I studied up on glazing and how to… I suck! And I can’t find Sarco’s brand locally anywhere and with fall coming I don’t have time for Amazon to f up and send it late. So I tried the dapp 33, it’s very sticky so I took my gloves off and that helped after working it in but my windows are in place and I tried tooling which isn’t bad until I gave to lift up to change positions of my hand where it then lifts off the glass or my corners are horrendous. I have rain coming so I’m using the purple insulation foam board to cover my vulnerable windows but still I’m so pissed I can’t get it! I’ve learned how to plumb, electrical, I’m passionate about woodworking and the true authentic old school joinery not stupid pocket hole quick building lol but I don’t get this! It’s not probably the worst glazing job but I’m tempted to scrape it all out and try again in better weather 🤦🏻♀️
Hi Steve. I'm replacing the glass in a bottom sash like the one in this video. I have the sash down to bare wood. When I measure for replacement glass do I include the depth of the channel the glass slides into? What is the best way to get this measurement? Thanks!
Hey there thanks for asking. You do include that measurement up into the channel for the replacement glass. Best way I know to get this measurement is to add a 1/4”, because that’s how deep the channel usually is. To be safe you could add 3/16”. The goal is for it to slide up in there. If the glass does that, then you are good. Another thing to consider is that your end measurement should resemble an even number in most cases.
Lee valley website shows this hammer is unavailable. Any other sources? I'd really like one of those hammers with the rotating head.
I saw that the other day and was surprised. They were the only ones I know who had them. Now I’m bummed.
So all window glazing face the outside of the home and when I look at the manufacturer website for multiglaze type m it says for indoor use only. If you want to glaze outdoor windows it states to use dual glaze from the same manufacturer. The difference of the two is that like you said type m will skin over and you can paint in two days but the dual glaze takes 2 weeks. I'm confused about why multiglaze states for indoor use only.
Multi glaze is intended for shop work but I use it for everything.
what is your "magic dust"?
It’s basically drywall compound from the corporate home store. We call it 20 minute mud. It’s a mix of calcium carbonate and plaster of Paris
Very informative video and I really appreciate all the tips. I could do without the distracting music, though.
I guess you’ll have to find another channel to learn from.
I usually don't like music in instructional videos but this works wonders on my brain. Classical music and you can clearly hear Steve's voice. I could watch this video 20 times. 😊