Hello! I just wanted to point out that this is an old video I've made when I was in my senior year in college for my university colleagues. Currently, I've graduated and also shifted careers. However, I'm leaving this video up because it's getting a lot of traffic which means it's useful for you guys. Cheers!
Non avevo ascoltato 1 sega di quello che aveva detto il prof in classe che, oltre a dirlo sbagliato era pure impossibile da capire a detta della classe. Non tutti gli eroi portano un mantello ma alcuni sono indiani, come te! Grazie di cuore dall'Italia
@@Thomas-ui7ci mah in realtà il mio canale RUclips nasce per l'esame di stato. Non riesco a trovare un canale RUclips preciso che si occupi delle cose dell'esame di stato e quindi ho deciso di prendere da diverse risorse i contenuti e poi creare il mio canale a modo di archivio. Detto in parol povere non ho una fonte fissa 🫤
Thanks, I was able to submit my assignment with 5 routers. Greetings from Bolivia ❤💛💚 Gracias, pude enviar mi tarea con 5 enrutadores. Saludos desde Bolivia
The routing is incorrectly configured. Once you set the IP address of an interface, turn on that interface and it goes to an up/up state, a directly connected route will be added automatically for its network. You can verify this by running 'show ip route' command from privileged exec mode in CLI. In your case, e.g. adding 11.0.0.0/8 via 11.0.0.2 on Router 0 is redundant.
i have this question the network address is 200.100.10.0/24 and it shall be divided to 7 subnets. the overall design has 3 routers . i have some doubt finding the network addresses
sir , i have a modem + router and 2 other router for better wireless connection. i have connected a nas connected with router 1 . i want nas to be accessible from router2 and from modem +router.... my connection is primary modem+ router connected with internet and remaining two secondary router connected to the primary via lan .. how can i config secondary router 1 so as to access nas from other router.... without affecting dhpc of any of 2 router or router + modem
It's not about how easy or hard it is, if you would like to do a certain task you should do it using whatever technique that you think is more convenient
I gave this video a thumbs down because some of your laptops failed to connect across the routers. But you continued on and kept selecting the same ones that connected.
@@HussienG2 I created a network with 4 routers 2 switches and 4 pc's (2 pc's each side), 6 subnet. the left pc can't send a message to the right pc. Where do you think is the issue? Thanks btw I'm using packet tracer 3
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Hello! I just wanted to point out that this is an old video I've made when I was in my senior year in college for my university colleagues.
Currently, I've graduated and also shifted careers.
However, I'm leaving this video up because it's getting a lot of traffic which means it's useful for you guys. Cheers!
🤙
Damn Helpful I understood the approach and now can solve any type of network that looks like this even if the routers are added to the network!
Non avevo ascoltato 1 sega di quello che aveva detto il prof in classe che, oltre a dirlo sbagliato era pure impossibile da capire a detta della classe. Non tutti gli eroi portano un mantello ma alcuni sono indiani, come te! Grazie di cuore dall'Italia
Ciao! Sono contento che tu abbia trovato utile il mio video.
Anche se non sono indiano, sono egiziano. Attualmente sto imparando l'italiano. Saluti!
Anche tu hai la maturità quest'anno?
@@HussienG2 sí
@@informaticacheappassionaChe risorse usi per preparare la prova di sistemi? Consigli del materiale in particolare?
@@Thomas-ui7ci mah in realtà il mio canale RUclips nasce per l'esame di stato. Non riesco a trovare un canale RUclips preciso che si occupi delle cose dell'esame di stato e quindi ho deciso di prendere da diverse risorse i contenuti e poi creare il mio canale a modo di archivio. Detto in parol povere non ho una fonte fissa 🫤
brother thank you brother it helped me 2 years ago and now is helping my brother too 👏🏻
Straight to the point guide!, thank you so much you helped me clutch the assignment🙏
This was a Great Help full for me in my project God Bless you😊❤❤❤❤
Bro, you literally saved my life, thanks you!
its being so cool to view your videos bro, thanks aloot.
Thanks, I was able to submit my assignment with 5 routers. Greetings from Bolivia
❤💛💚
Gracias, pude enviar mi tarea con 5 enrutadores. Saludos desde Bolivia
BOSS, it is the easiest way. thank you brother
You're a legend
I want to say u if u have great skill so plz use your voice for instructing well
легенда спасибо !!!!
straight to the point !!! Thanks a lot man
It was silent and killerly good :)
Hey, thank you for the video.
Is this 6 subnets? How we understand or count the subnets?
Thanks For Your Sharing. Thanks For Your Times
good job bro..❤
way to fast and no sound it hard to follow.
U can change the speed of the video
رائع أستاذنا الله يبارك
I want say you,how to attach many static IP in one port
what did u did in the last
why not connect with RIP? Its more easy then Static, isnt it?
Thanks for the vid.
Thanks for the help
Create a network to implement 3 routers with 5 switches connected with 5 end devices each can any one help me with this question
What is the version of your packet tracer? Why am I not seeing the generic router? I only hve PT- Router and PT-Empty? version 7.3.1
thank you kind stranger
why in the first try of simulation, show "FAILED"?
it first needs to build the ARP table so it will show fail in the first try
The routing is incorrectly configured. Once you set the IP address of an interface, turn on that interface and it goes to an up/up state, a directly connected route will be added automatically for its network. You can verify this by running 'show ip route' command from privileged exec mode in CLI. In your case, e.g. adding 11.0.0.0/8 via 11.0.0.2 on Router 0 is redundant.
Check how to configure telnet
ruclips.net/video/8BouG32n6-8/видео.html
works but computers don't pack each other help me please
Packets get stuck in infinite loop for me between routers incorrect video
Can u give the installer link for this
i have this question the network address is 200.100.10.0/24 and it shall be divided to 7 subnets. the overall design has 3 routers . i have some doubt finding the network addresses
Total # of hosts in the network should be lesser than 256(with net & broadcast), then calculate net address using # of bits allocated in net ID.
luv u man
you've colved my problem! Thx a lot!!!!
Too bad there is no sound to explain what you are doing but otherwise very good video
Jo router directly connected hai uska bhi network address dalna jaruri hai kya
What type of topology is this?
Thank you ❤
sir , i have a modem + router and 2 other router for better wireless connection. i have connected a nas connected with router 1 . i want nas to be accessible from router2 and from modem +router....
my connection is primary modem+ router connected with internet and remaining two secondary router connected to the primary via lan ..
how can i config secondary router 1 so as to access nas from other router.... without affecting dhpc of any of 2 router or router + modem
Hi can you please me to connect 3 router with 42 pc
This is my email address nizu321@gmail.com please mail me thank you
Thank you!
How about doing a video of a 4 or 5 router networking setup?
same steps
J'aimerais comprendre la configuration de ces réseaux
1&2 routers are connected but 3 router is not connected what should i do sir ? Whats is the proper ip route for router 3 sir .
Pay me and i gotchu brother
It could be better if u would have added voice cover
thankyou so much
Thanks a lot .
Thank you pro
voice cover will make you super,
Thx a lot ILV
Thanks
:)
Ping kar ke dikhav....run hota haj kya nhi
Thanks a lot
WE NEED CONSOLE, WITH INTERFACE ITS SO EASY
It's not about how easy or hard it is, if you would like to do a certain task you should do it using whatever technique that you think is more convenient
the equivalent on the console shows in the interface, on the bottom textview
There is no we, you need it xD
dayum bro, u nailed it
Danke schön
thx man
thanks a lot
Thankss!
u fcking genius!!!! ty!!!
Talk less, do more!! Thank you very much!!
This is stupid. How the hell can people follow along without any audio????
Cause you are stupid , that is why you can't follow habibi
helpful.
this is good if it has audio
where is command...??
Abhi Praz Hey Abhi, it was done without commands, just the input fields.
You can see the equivalent commands under the input field
Nick Patalinghug that is correct, thanks for your helpful input
Thank you for the helpful video sir I needed this for my project :D
Check how to configure telnet
ruclips.net/video/8BouG32n6-8/видео.html
Permision to use min 🙏😁
Thank You! very helpful
Thanks
amazing thank you so much
grazie
لايوجد صوت
Thank you bro, thank you sooooooo much
I gave this video a thumbs down because some of your laptops failed to connect across the routers. But you continued on and kept selecting the same ones that connected.
where is cmd??????????
And 4 router
السلام عليكم Hussein
tanks cannons
need audio and cant see certain things
There's no audio unfortunately, but you can ask me about which parts weren't visible.
@@HussienG2 I created a network with 4 routers 2 switches and 4 pc's (2 pc's each side), 6 subnet. the left pc can't send a message to the right pc. Where do you think is the issue? Thanks btw I'm using packet tracer 3
@@HussienG2 where did you get the 11.0.0.1 and 12.0.0.1?
sidhi baaat no bakwas
Deus.
كفووو
D
lol
video resulation is bad. but thank you.
News One you can set the resolution to 1080p.
lul
Check how to configure telnet
ruclips.net/video/8BouG32n6-8/видео.html
Thank you!
Thanks
Thanks