Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
Great video, thank you! Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure . On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged ruclips.net/user/shortspFXDfNHlTG8
Excellent Job! This is a great video with plenty of dealer spec information.
Perfect work. Thanks for manual screenshots...
What is the plug behind the driver super chager? I pulled it up without some how unplug it. I can't do it? 2017 range rover 3.0 sport
Very good thanks from germany :-)
Great video I’m actually doing the same job was putting the supercharger back and on the drivers slide at the back of supercharger I connected the coolant pipe and the electrical sensor but on the passenger side I can’t seem to find or remember what plugs in to the port at the back
Great video, thank you!
Do I need to take off the whole supercharger just to change the coupler ? Or will I be able to remove the snout without removing the supercharger? Thanks
How much oil drained out of the supercharger?
How much oil did you put in the supercharger?
Hi, thanks for the vid. Could you tell me the torque for all the screws? Thanks in advance.
Nice video here, very helpful for my jaguar work. Just wondering what marker you are using on the bolts (green one) and why you are using them
@@xuehaotan9292 paint marker from Amazon. Once bolt is torque to spec it always gets a Green mark to make sure .
On connectors they all get green marks also to make sure nothing is missed upon re-assembly.
How did you pull apart the Snout from the supercharger the glue they use is too strong I am trying to do it now impossible
Vice and rubber Mallet.
Where could one obtain the repair manual for a 2017 Jaguar xe?
I used all data.
Estimated dealer cost?
Takes me 2 days - 16 hours. I’m at $45 per hour.
Subscribed!! One of the best videos on youtube! From camera angle to explanation to every details... couldn;t be better.. Thank you so much... Also, would you happen to know what is causing this noise on my RRS V8 Supercharged ruclips.net/user/shortspFXDfNHlTG8
One of the pullys. Or tensioner.
@@E39M5SPEED Thanks again! much appreciated.