100mph Crash - Speed Run - Is it the end of the TFL Zonda?
HTML-код
- Опубликовано: 31 май 2020
- It's over - she's gone - let's see if we can save something. Those where the thoughts that went through my head when that happened. Luckily I think we are good to go again fairly soon. You get the good and the bad guys... Sorry for the long video, didn't feel like making the usual edit this time... bear with me
#tflhobby #hobbywing
----------------------------------------------------------------------------------------------------------
Worlds (now second) fastest Zonda:
My specs for the Z aka Superleggera:
Motor: Twin SSS 3674 2075KV
ESC: Twin Hobbywing Seaking 120A
Servo: Savox SW-1210
UBEC: Hobbywing 10/20A
Batteries: Turnigy Heavy Duty 5000mAh 6s2p (2x6s)
Prop: Twin ABC (self prepped)
Drive line: Stock
Reciever: Flysky/Turnigy FS-IA6B
Additionals: Fully custom carbon fibre inlay with fibre glass reinforced hatch, custom paintjob and blue Lamborghini theme, modified cap packs and additional floatation
My TLF Pursuit specs:
Motor: Turnigy 4082 1450KV
ESC: Dynamite 160A 2-8S
Servo: Savox SW-0230MG
Batteries: Turnigy Graphene Panther 3000mAh 4s2p (8s)
Prop: CNC Alu 4717 non sharpened nor balanced
Drive line: Stock
Reciever: Flysky/Turnigy FS-IA6B
Additionals: Fibre glass reinforced and with floatation
FT011 - Once worlds fastest, now stored in its stock form
----------------------------------------------------------------------------------------------------------
Limitless:
Motor: Arrma BLX 4074 2050KV (same as infraction)
ESC: Hobbywing EZRun Max6 v3
Servo: Savox SW-1210SG
Batteries: Running 8S (speedrun only)
Infraction:
All stock with speed pinion gear @ 6S
Stay #nerdthenewcool
----------------------------------------------------------------------------------------------------------
Transmitter:
Flysky FS-GT5/Absima CR6P
Charger:
ISDT T6 lite
Hobbyking Parallel Charging Board
Field charge packs: Turnigy High Capacity 14000mah 6s2p (2x6s)
GPS:
Garmin Forerunner 230
Garmin Forerunner 101
Garmin VivoActive
SkyRC GSM020
Camera:
GoPro Hero 7 Black Edition
.
.
.
.
.
.
Thanks to my friends supporting this jurney and making this run possible:
Steven Bryant
Anders Hoexbro
Thanks to my sponsors:
- Hobbywing - www.hobbywingdirect.com
- iFlight - www.iflight-rc.com/
- TCS Micro Pumps - micropumps.co.uk 
Кино
Man that sucks majorly Bro! Emil you are one of the "Good Guys" and a class act, a dude that never pouts or talks crap like some of the other "RC boaters" do in their videos . I really hate to see that happen to your boat man but I know you will get her back out in no time. Thanks for the shout-out as well I really appreciate that. 👊
Thanks for the generous comment man, that really means a lot to me 🙌🏻 you’re much welcome
Sorry about your Zonda man that sucks.Some people don't realize that hitting water at those speeds is like hitting concrete.
Its tuff on anything crashing at these speeds 😱🤕
You got it & if you have ever water ski on slolom ski & crash at 60mph you know how hard water gets at those speeds the ground is softer!
Fully agree
@@miguelsalami yea you would think that we would get this sooner when the moment we did a belly smack off something hight when we were younger and for that split second we know we fucked up...
Holy crap Emil!!😱She was skipping across the water like a rock!👀Yeah the water was definitely getting sketchy right there! Glad it's not a total loss man..it happens in the game. Hope for a better run next time bro!😎👊
Yea... strange enough the boat is still rock solid, but i will need to look a bit more into it and maybe patch it up. I had planned for a refresh on the paint later this year anyway, its just a shame it need to look like this for the rest of the season 🙈👍🏼 i hold my head High, it will run untill its no longer capable 🚀
Thanks for the positive comment 🙌🏻 very much appreaciated bro
Too windy to be running 98mph❗
This is all part of Racing man but at least you got the boat back. Water is hard as concrete at these speeds & boats can disintegrate after losing control from all the extreme stress so things could have been a whole lot worse. Thanks for sharing & hope to see your boat back on the water soon.👍👍💛
Thanks for the support ! You are right... i will never drive this boat close to 100mph in such conditions again🙈 will be back soon
Bummer,thats why Im cautious about fully pinning the throttle for very long .can bondo fix your boat?
That sucks bro let me know if and when you get it fixed I did something similar to my proboat veles 29 I was driving later in the evening and was about 2 ft from a buoy had the wrong direction of the front of the boat cause the reflection on the water looked like the front was the back and the back was the front and bumped the buoy going about 15mph and when it came back down from straddling the buoy the buoy must of had a screw on it somewhere and it punctured the bottom right sponson as I don't have the money to fix it right now just filled the hole with some flex seal and plan to take it to my local auto body shop and have them repair the hull and repaint it but don't know what I am going to do about the decals as no one sells them for the veles 29 kinda sucks cause only the 4 th run ever with it but gotta do what I gotta do...
Ohhhhh boi that sucks !!! You just gotta fix it and send it mate ! The first scratch is always the worst.
I will patch mine up soon, there seems to be no structual degradation, so thats very good. Will give it a complete new paintjob for next season, so its gonna come back to its shine and glory next year.
What tape are you using on hull
Nitto PVC Tape mate :)
Looking at the damage did you not hit something in the water and that's why it flipped..
wud you consider 4s x2 and /or 4s x4 ...in ur experince?
Its 2x 6S for this run. The speed controllers are only rated for 6S per piece, so i cant go higher than that :)
@@EmilWilkens oh i see. i was thinking its electronics were same as miss geico 36,which i have dry tested with 4s x4.
Kiyomi Swan the miss geico controllers cannot take 8S ?
@@EmilWilkens oh no...it does, 2 technical utuber made it clear,that it can use 4s x2. but they didnt mention anything about 4s x4. so i did a dry test using 2 paralell adapters,works fine. i have noway to test or know if it will increase in speed. due to the fact it is using 14.8v x2 or 14.8v x4. have not found any utuber challenging this 4s x4 config,but imsure there is,just not seen it yet. seeing how daring ur channel is,is the reason im asking you. im abit of a chicken shit to do full out throttle,even tho i have set it up 4s x4 7200mah 80c. wud like to here ur opion on this or even a challenge video.
im trying to find out a straight up answer to this qs. "can miss geico handle 4s x4 80-100C". coz most what ive seen is 3s x4 50C. im actually more concerned about the max. "Cs" it is designed for so that i dont over do the "Cs". pls do share if you by chance do know or will later know, wud much appreciate that my friend.
it was hauling @ss perfectly at high speed. doesnt appear that the boat failed at all. consider ur buddy seems rite tho,body damages like that is mostlikely from hitting something hard...possibly a pretty good size turtle positioned aslike a ramp,tossed the boat airborne for a long @ss way. to me thats a badd@ss run man,cant predict nature.
I wish it was something in the water, but im not so sure... we dont have turtles in Denmark, so dont know what it might have been. Its going to be out again soon though.
@@EmilWilkens hey thanks for that interesting nature fact, i didnt know abouthat. anyways the video and experience you have withis situation isnt totally negative gain, coz from this i just learn a serious investment lesson,of corse at ur cost. seeing it crash like that (of a real world speedboat record setting landmark),was painful but allowed us to see true life n death sports challeges in rc scales minus human cost. this and many other similar crash video can teach us alot about taking the risk for the numbers...atlease for me anyways. thanks for sharing the actual footage. i think that i can say safely that most of us with high speed boats similar to urs can now see whats possible,even tho the lake seems so safe and well suited for ur challenge. i dont under estimate or now trust my lake surfaces anymore as i used to from this video.
I know just how you feel, been there done that my friend! Looks like you might be able to repair that. Check out my Zonda 90 mph crash on RUclips flyby8906 mine was not repairable as you'll see in the video . Good luck
I seen that video a while back, crazy!
Did you recover any of it or did it all sink?
Yea that was a bad one. Your video is my worst nightmare, and one of the initial reasons why i reinforced my boat before even running it. Sorry for your loss brother 🙌🏻
@@secretsquirrel1942 The boat itself was in 3 pieces. Yes retrieved everything that day and the next. Put everything into rice till it was dried out. Ordered a new hull, glassed all the weak areas in the hull. Reinstalled all the gear and running the hell out of it again. If your afraid of crashing your in the wrong hobby.
Oh no
Yea... i Think it would have been a great run
It didn't sound happy right before the flip.
Water too rough.
That sucks but coulda been a lot worse.
Im surprized the hatch stayed on.
That's the good part about fiberglass -can be fixed.
You'll get it fixed.
secret squirrel Looking in the rear view mirror, conditions did not allow for what i was doing... but yea, thats a lesson learned.
Thanks for your feedback and always kind words, you and your content are one of the main reasons why i started doing this to begin with.
Keep it up 🙌🏻
I 've been dealing with bad water all year worse then this.
I flipped the cheetah twice just like this, luckily its ok.
A week later i said im going home (water was so bad) then i decided to run the zelos last minute.
Zelos paid the price looks way worse then your boat......all while the zonda never left the back seat of my car.
This is part of the reason why my zonda stayed on the shelf for a year because I know the end result.
I have some parts if you need em.
@@secretsquirrel1942 ohhh, im sorry to hear that as well my friend. Did you manage to get that on camera? I have the Zelos Miss Geico currently in my workshop beeing reinforced, so it will be ready to hit the water within the next month or so.
Oh Nej, det gøre mega ondt i mit hjertet