Easy multi frequency DIY RADIO JAMMER - CC1101 & Arduino Pro Micro - 10$ cheap wideband RF JAMMER
HTML-код
- Опубликовано: 6 сен 2024
- [ENABLE CAPTIONS!] I am giving you the universal RF jammer that operates within sub 1GHz RF range. It is constructed of Arduino Pro Micro ( 3.3V , 8MHz ) and CC1101 board. Total cost is below 10 USD, the output power is 10mW.
All of the project details are available here : github.com/mco...
The jammer can succesfully jam car keys, wireless doorbells, drones and other devices that operate within 300-348 MHz, 387-464 MHz and 779-928 MHz. The output radio power is 10mW but it can be easily extende by adding cheap RF output amplifiers. This device can also protect your car from being stolen by jamming hackers RF device that are sending keycodes on particular car's freqency... In the video I am using great SDR++ tool for graphical RF output.
Remember that RF jamming may be illegal in your country !
This video is only for educational purposes showing how to integrate CC1101 board with Arduino boards.
If you liked the video please press LIKE button and SUBSCRIBE my channel for more cool stuff.
Thank You for your support !
#ALCHNL #ARDUINO #RTLSDR
Damn Buddy, Bustin out the AVR Assembly on us!!! Sweet!!!!
First of all great job sir
Sir I am a student of
Electronics 2nd year I am working on a similar project to jam radio transmitter named fsi6 used for drone controlling, but it work on Frequency ranges between 2 GHz to 2.7 GHz
So please tell me what necessary changes I can do to jam in between this frequency
Warm regards
(Note , I am aware of the fact that CC 1101 module deal with maximum frequency of 982 mhz)
use board module with CC2500 chip. According to this description it may work with my code for cc1101-tool
e2e.ti.com/support/wireless-connectivity/other-wireless-group/other-wireless/f/other-wireless-technologies-forum/281641/compatibility-between-cc1100-and-cc2500
mając arduino 16mhz i 5v można zastować modulik zmiany zasilania z 5 na 3,3V (jak widzę na stronie sklepów są dostepne takie rozwiązania jak ktoś już posiada wersję 5v i nie chce zmieniać płytki arduino)
Все получилось, скачал последнюю версию IDE 1.8.19. -Помоему. Спосибо вам огромное за проект!!!!!. Надо делать усилок
you are welcome !
Can this use an atmega32u4 5v 16mhz?
AFAIK no, because it will operate on 5V TTL logic
u answer every question, i like it
Me too!
Thanks its working great for me
Hey ill pay u too show how to do it
Pls make wifi jammer for 2,4ghz or 5ghz
Great work 👍👍
big like and subscribed as well ! great coding , very nice video
look for V2 version of this jammer on my github page, it is even simpler and more configurable
First of all thank you sir for making this video it will help me a lot in my engineering project I have two queries
first tell me about the specification of c 1101module that u used and secondly tell
me how can I increase its range
Pls Try to response ASAP
warm regards
these CC1101 modules are mostly the same. I was using D-SUN CC1101. If you want to extend the range use a CC1101 with LNA built in like E07-433M20S
@@justanengineer5599
What is the current range of this module ? ( Depicted in video)
Thanks for answer
100m
Can I use CC1101 Wireless Transceiver Module With SMA Antenna 433MHz@@justanengineer5599
@@justanengineer5599 Does it affect the code
Hi. I repeated your example. I used only an arduino nano (5V / 16MHZ + level shifter) - the result is the same as in the video (I also used an RTL SDR receiver). The result is good only if we do not jump through the channels, but at the same time the frequency of the alarm keychain may stand aside from the configured frequency. And if you start jumping through channels, then the signal level is naturally less - this is logical, but at the same time there is a big chance to miss the moment when the victim uses the signal source. what makes jummer not effective! If you are the author of the code, then how can I correct the code so that the program routinely iterates through channels, say, starting with frequency 433 and ending with frequency 435 and at the same time get a solid spectrum of noise?
Hi. The CC1101 can only send data at one channel at a time. It can do fast hopping between channels, but it is still limited. You can play with such settings like : modulation (ELECHOUSE_cc1101.setModulation) , channel spacing ( ELECHOUSE_cc1101.setChsp) in a file : "arduino-pro-micro-cc1101-jammer-v2.ino" that uses SmartRC library. However the best would be to build several jammers each tuned to different baseband and switch them on simultaneously.
See my latest video that will be published today, that may help you a bit with jamming stuff, I am also showing this function there.
@@justanengineer5599 Cool😁. I did some experiments, a results you cane find on my channel 👍🤝
Great and very detailed explanation, thank you for this.
I really dont know nothing about the frequencys but i would like to jamm one particular thing that operates on 433.92mhz... what frequency do i need to write in the code?
This frequency is used by my neighbors for some kind of motor, the problem is that this motor is really loud and i would like to jamm this thing so hopefully thei change it soon 🤣.
Please help me 😁
there is already such line in the code with the value 432900000 you just need to uncomment it
You can change the code with potentiometer to choice the 433 or 980 ...
good idea but you would need some display as well to indicate what is set
btw,in desc,it says until 928mhz but the transmitter is 433mhz
Does not matter it is only output LC filter parameter. The chip can transmit on any freq between 300-928MHz
@@justanengineer5599 thx for reply 👍
So, are you the GITHUB guy?... 👍
as long as it is free of charge 😃
Thank you so much nice tuto
great job!!
Can this be used on Arduino Nano?
yes if you power it from 3.3V through the RAW pin or external VCC pin
I have Arduino Pro Micro but unfortunately 5V / 16MHz version. To connect it to C1101 I use bi-directional logic level converters for all signals. Additionally I use step down converter to get 3,3V for power supply. For rev.1 of your code - I changed FCPU value from 8 to 16Mhz. Do I need modify something more to get it work?
I think you should also check delay functions because they may be tuned to 8MHz clock
Hi friend thanks for those wonderful videos you educate us with. I wonder if you can replace cc1101 with nrf24L01?. and if your answer is yes, what will the flr code be?. can you help me please
nope. NRF is a simple chip and not good for such activities. Check comments down below before posting questions like this. There was already diacussion about NRF24L01
Cc1101 works with sub-freq and nRF is for wireless comm with 2.4ghz like WiFi
Hi, thank you for your tutorial. How many meters can it disrupt radio waves?
normally 50-100m but you may always attach some RF amplifier. There is a lot of them in chineese shops
can it be connected directly to a usb of the 5v power bank?
yes of course. The Arduino pro micro converts 5V to 3.3V to power CC1101 board
Hi many thanks for your video ! what are you suggesting to use as component to amplify the power of cc1101 ? maybe around 3 Watts
there is a lot of RF power amplifiers on Aliexpress. I did not test them but if I would like to buy I one would be searching for something tuned to single frequency like 315MHz or 433MHz
Someone asked (about the Same question ) --- However, I'm interested in jamming a band (range) of frequencies. ( ie, 600-650 mhz ) how can I do that?
The source code allows to use this frequency but I do not think the chip can handle this. You would have to build an ordinary old LC based generator for this
Hi. This was very informative video, thanks for sharing. Is there any areangement where we can use 315 and 433 mhz simultaneously without changing frequencies through software.
As far as I know NO. You would have to build 2 of such units to achieve this effect or relay on fast frequency hoppng of CC1101 chip. But hopping means less effectiveness of jamming
You could use an ESP8266 or ESP32, both programmable using Arduino, and 2 RF boards.
The ESPs are much faster than a mini or micro Arduino
Nice bro
I would like to thank you for your great posts in you tube and ask a small question ,hope you consider .
I just made the rf jammer with cc1101 and pro mini and every thing is perfect but the noise signals stop after a while about 30 minuites for axample , and i have to reset the circuit . do you have any idea why is it so !??
Hi, I think it may be somehow related to the battery power. Maybe it disconnects after sometime (some powerbanks like to do it).
@@justanengineer5599but i use dc adaptor ….
Will RF Jammers like this one jam both FM and AM radios 📻 ?
yes.
Thank you for the video and the prompt content. Have you ever tested Samy Kamkar's Rolljam device?
not yet but I am planning to make my own.
It would be very interesting to share this project with us.
Can you explain how to jam low frequency (0.5Mhz - 100Mhz) signal within 10meters range?
for this you need to build analog LC generator with MOSFET transistor like this en.m.wikipedia.org/wiki/Armstrong_oscillator
Hello and thank you for the video, will it jam a stereo integrated amplifier/mixer/microphone/speakers/hifi and stuff like that?
Hi, this is for radio frequency jamming like wireless keys or remote controls. If you want to jam microphones there is separated video here ruclips.net/video/8RgoYlrgW4s/видео.html For speakers and audio amplifiers I do not have solution.. yet
Hello.Interested in the question.The entire compilation takes place.But in the middle there is a red-WARNING-"F_CPU" redefined and in this spirit 16 lines.something is missing. How are you?
which source file have you used ?
hello Im new to electronics but once its all put together and wired up and has the right modules when you plug it in to a Mac should the windows the control the modules pop up and what frequency do you use to black a radio signal the same as the brain thnx!.
the brain can only be controlled by social media as tiktok, facebook, twitter, instagram. Thats the only way and moreover the most effective!
I really like it I would like to know how far you can jam with this device what is the radius please if you can give me some info
50-100m depending on what you are trying to jam
Сделал усилок, но женить его с CC1101 плохо получается. Поэтому решил с si4432 он вроде по мощней. Или дайте совет, какой усь ставить
Hi do you know a way to filter the Nosie the jammer is making in order to capture a clean signal from a car key.
you need to shift a bit the frequency of the jammer in comparision to the original signal of the key (100-300 khz). Then you will be able to record original signal with rtlsdr device
But cc1101 isn't that versetile for continuing frequency sweeping so how any frequency instead of decreat??
As mentioned in data sheet
".. frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 387-464 MHz and 779-928 MHz bands."
There is some gap in frequency like between 348-387 and 464-779 Mhz?
yes there is a gap in frequencies
Can we use this for lora frequency?
yes
I mostly see cc1101 433 model ?
Does it capture other frequencies like 315 too ?
yes. you can even see it in my video where I am switching 433 MHz board to 315MHz. Have you watched the video carefully? I presume not because you wouldnt be asking so obvious questions
Can we made jammer using NRF24L01 ?
Скажите на si4432 возможно сделать? Если возможно, то дайте дельный совет.
can we add to arduino attiny to auto program frequencies with sellect button with oled = that would be not bad :)
even with this board you can use oled screen and buttons. Unfortunatelly I do not have free time to extend the source code for this features
how much does it cost to jam am and rf security gate
10$ depending on where you purchase CC1101 module and Arduino Pro Micro module
Hi , i want to amplify the signal to support at least 70db , what kind of amplifier should i use to be synchronized with cc1101 ?
the one that matches cc1101 antenna socket sma
I have a m1101d here and it’s connected to my arduino nano. I am trying to program it to where it can be 315 MHz as it has a cc1101 chip and is able to do this according to seller. How would I do this?
there is a field in the code that selects the base frequency. Watch the video carefully
Nice video dude, like always. I sent an email with a question related to a rf module with potential to be used as a jammer, but I cant make it work. Hope you find time to give it a read. Thanks.
yes I have seen this mail. I have 2 of these modules but the are using FSK modulation and are not suitable even though they have bigger RF power. For best jamming we need something that supports OOK on off keying techniques
I want to use Ebyte E07-433M20S (20 dBm) instead of C1101 (10dBm). How can I use the same code to get 20dBm output?
if you meant this module www.ebyte.com/en/downpdf.aspx?id=457
then no changes are needed in the code
can i replace arduino micro pro with nodemcu esp8266 or digispark ? without change code
if you use version 2 of my code here : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-MINI-cc1101-jammer-v2.ino and following library from Little S@tan then it may work github.com/LSatan/SmartRC-CC1101-Driver-Lib
@@justanengineer5599 thank you . i will try and share result here .
I was gonna ask the same , I have a esp8266 , but would it work without the rf module ? I mean esp8266 is already emitting some kind of signal
yes it should work. CC1101 operates on differeny
t radio band than ESP.
learning for educational supplementation. does this jammer affect Bluetooth on a car's unit? and what kinds of materials will this not penetrate through, if any (lead perhaps)?
im assuming this is affecting radially as well, so would it affect more than one radio/thing at any given time?
it is sub GHz while Bluetooth operates on 2.4GHz therefore cannot affect BT
ty @@justanengineer5599
Cześć super materiał. Czy znasz jakieś skuteczne metody na zagłuszanie bluetooth? Chodzi mi o wyłączenie za głośnego sąsiada w razie potrzeby. @@justanengineer5599
to nie jest takie proste bo Bluetooth ma technikę anty zagłuszeniową czyli frequency hopping. można próbować używając płytki z NRF24L01 ( która ma wbudowany wzmacniacz LNB ) ale zasięg tego mimo wszystko będzie mały www.hackster.io/CiferTech/how-to-make-wifi-jammer-but-with-nrf24l01-8d6dad
What source would you use to power this up on the go? Would a powerbank with 5.1V output be the right choice ? Does the unit have a transformer? (Newbie to electronics)
regular usb 5V powerbank would be just fine. It draws less than 50mA
@@justanengineer5599 Appreciate it 👍
I have a few qn
1. Arent drone work in 2.4ghz?
2. Does this work in selected frequency? Or all in one[300-980mhz]
1. depends on drone type. some are working on 5GHz
2. you put your single frequency in the source code. However... The code may change transmission between different frequencies if you configure it
@@justanengineer5599 1.but the jammer works under 1ghz. How is that possible?
some drones are using 868 or 433 bands
hey mate. lov all you vidoes.. and I want to build this.. but is there a way I can use only 1 pro micro. and then connect to 3 or 4 pcs of cc1101. so I have one for 315. one for 433/434 and one for 868 or maybe 4 with the last for 915 . and can you make a code for that. I will pay you for your service if you can.. and by the way, keep op the good work. this is so nice to watch and lean form you. thanks from Denmark,
as far as I know you can connect multiple CC1101 to the same SPI lines (MOSI, MISO,SCLK) but different CS/SS pins. Normally even SmartRC library supports I think 2 CC1101 boards at a time. The only problem is that you need to keep some settings of each CC1101 board in the microcontroller memory which may pose some problems
Który model wzmacniacza RF polecasz z ALi? jest dość sporo.
szczerze mówiąc nie testowałem ale jakbym miał wybierać to szukałbym czegoś z opisem bidirectional czyli dwukierunkowy oraz dopasowanym do konkretnej częstotliwości np 433MHz
Well done bro . need 500khz/2mhz jammer, this circuit work?
According to CC1101 specification it will work only between 300MHz - 928 MHz. So the answer is no, it should not. I admit I havent tried configure it to work on such low frequencies. However
You may try to put 2MHz value to the code to see if it can work... Please use revision v2 of the code : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-MINI-cc1101-jammer-v2.ino.
Hi, Can we power device from battery 18650 ? Thank you It should last day or two ?
yes you can. but you need to provide at least 5V to feed voltage stabilizer on Arduino board
Hello sir, can I use nrf24 instead of cc1101? Thank you for this nice explanation. I wish you success.
no, this source code is compatible only with cc1101. I am currently working on NRF24L01 version
@@justanengineer5599 Thank you sir for the reply cc1101 is not available in my city only rnf24 is available so I asked you if I could replace this part
you can buy everything directly from china. Try on www.aliexpress.com
is that work to jamm Gps or not ?
no
Hi . I want a jamming device (small size) and its frequency range should be (from 250mhz to 900mhz)
then make it. you have all data on github. what is the problem?
Does the antenna have to be in that shape or can it be changed
And why not just use a 555 timer to generate noise. cheaper than an arduino
because in arduino you may use "random" function to generate the payload.
@@justanengineer5599 oh so generating random noise
hi sir . ı want to ask can we use to jam with same code with CC2500 2.4ghz if we add library ?
no, this is completely different chip.You would have to use different library like this one here github.com/yasiralijaved/Arduino-CC2500-Library I will probably prepare the 2.4GHz jammer for this board in the future
I want a remedy for 2.475ghz radio frequency to jam!
check my newest video and use your head
Will fm radio jam with this my neighbor is deppressing with his radio with high sound🥺
it starts jaming from 300MHz up. The FM radio works on 88-108MHz. I would suggest to buy Car FM radio transmitter for cpuple of bucks to jam it
Does this also work as a form of brute Force? Since it is sending out spam?
no this one sends random sequences. Brute force is a logic of sending each combination of bits only once. check my latest video. cc1101 tool has a brute force function built in. It was added recently :
ruclips.net/video/iPVckkTjsd0/видео.htmlsi=IgL6qfH_Mwi1kYWU
ruclips.net/video/mdkEK_wmWJA/видео.htmlsi=bwWGA6IIaSJWRSNl
Project page : github.com/mcore1976/cc1101-tool
Wow great video! 👍😄👍 Btw, can I use Raspberry Pi Pico board with the CC1101? And also, how about using the logic level converter to protect the CC1101 from the 5V voltage of Arduino Uno? Please reply, thanks in advance. (Watching fr🇵🇭m)
✔️Subscribed
✔️Liked
you can do all you asked with my newest project here
github.com/mcore1976/cc1101-tool
also check my 2 latest videos showin how it works
czyli jeśli zmontuje sprzęcik w szafce gdzie trzymam kluczyki to może być zakłócenie w celu skopiowaniu sygnału z kluczyka?
jak najbardziej. tylko najpierw musisz dokladnie sprawdzic na jakiej czestotliwosci nadaja twoje kluczyki i dostroic do tego zakłócanie
@@justanengineer5599 ok dziękuję
can i use a 5v to 3.3v voltage divider circuit with resistors to make the cc1101 run from a 5v pro micro. It technically should work right? Also can I make it work with 16mhz?
Yes, resistor divider would work but you have to ensure enough current like up to 50mA. If you want to use 16MHz based Arduino please upload V2 version of the source code : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-micro-cc1101-jammer-v2.ino but you need to upload also CC1101 library
@@justanengineer5599 ok thankyou
with this Is it possible to generate 1800-2300 MHz ?? Or how to achieve that ?
different chip from CC series is needed
Go ahead and start asking questions on how to turn an "ANTI DIRECTED ENERGY WEAPON" into the exact same we/you/us/US/U.S./U.S.A. users use as an attack signal.. I was *PERSONALLY taught by the f.c.c. and e.p.a. themselves that 1 gigahetz(1,000 000,000Htz) is the beginning of the end 2 g was a punch in the face 3g was *JUST ENOUGH" 4G was sharpening the *SPEAR.. and 5g was a kill shot.. and 10g means their coming back for more.. T.D.m.atch a.k.a. Anti DIRECTED ENERGY WEAPON AGENCY
have you found the solution for 1800-2300 mhz if yes please can you share
Cześć Adam ! Po pobraniu tego programu - arduino-pro-MINI-cc1101-jammer-v2 z GitHuba w Programie Arduino IDE po próbie wgrania tego na płytkę Wywala błąd :( Opis błędu - stray '\302' in program . Adam pomóż ! 😂👍 mało się na tym znam ale czy mógłbyś ten program naprawić ? Bądź zmienić na jakiś prostrzy aby tylko arduino połączone z modułem cc1101 zakłucało te jedno pasmo 433mhz i wstawić na Githuba ?
cześć.
Zakładam, że masz odpowiednią wersję płytki Arduino - tą z zasilaniem 3.3V i 8MHz zegarem. Jesli nie, to nie pójdzie i spalisz sobie CC1101...
Co do kopiowania kodu ze strony to musisz kopiować tzw wersję RAW z githuba pod tym linkiem : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-MINI-cc1101-jammer-v2.ino
Ten kod ma ustawioną częstotliwość 433.92MHz nadaje na jednym paśmie z pełną mocą... Zmianę częstotliwości masz w tej linijce kodu "ELECHOUSE_cc1101.setMHZ(433.92);"
Błąd Ci wywala, bo skopiowałeś ze strony WWW jakieś dziwne znaki i nie chce ci skompilować Arduino. Zawsze jak kopiujesz to przełącz wcześniej stronę Github klikając w przycisk RAW.
Pamiętaj też że do tego pliku musisz dołączyć bibliotekę ściągniętą tym linkiem : github.com/LSatan/SmartRC-CC1101-Driver-Lib/archive/refs/heads/master.zip :
Szkic / dołącz bibliotekę / dodaj bibliotekę .ZIP
Podczas wgrywania kodu musisz wybrać odpowiednią płytkę : Arduino Pro Mini.
Narzędzia / Płytka / wybierz : Arduino AVR Boards, potem : Arduino Pro lub Pro Mini.
Następnie : Narzędzia / Procesor / Atmega328 3.3V 8MHz
@@justanengineer5599 Ufffff ! Dzięki wielkie ale mam właśnie płytkę 5v 18Mhz ale chcem ograniczyć prąd z vcc rezystorem na moduł cc1101 tak aby było na nią te 3.3v chyba powinno się udać 😂 ! Dzięki wielkie Mój błąd !
na płytkę 5V to gwarancji nie daje. 99% szansy ze ją usmażysz tym napięciem...
@@justanengineer5599 Dzięki Adm ! Wszystko się udało i działa prawidłowo 👍⚡ Znasz się na tym i jesteś super gościem dzięki wielkie za pomoc ! Czekam na więcej twoich ciekawych filmów . Pozdrawiam
Szybko poszło :-) W tym kodzie możesz sobie sporo parametrów pozmieniać takich jak modulacja czy szerokość odstępów między kanałami itd. Dołóż dobrą antenę do CC1101
Hello, thanks for your informative video. Do you have any info/suggestion for best product to detect emitted wifi signals from any device? Like for instance if any hidden rougue wifi device (from laptop, notebook, mobiles, tablet etc to regular consumer electronics like remote controllers, air conditioner, refrigerator, light bulbs, light sockets etc) is covertly capturing audio/video and sending it worldwide to hackers and data exfiltrators. These rogue devices generally have hidden implanted transceivers for this nefarious purpose. I came across one such affordable device "GQ EMF-390" RF detector, but not sure if it can give accurate reading with exact frequency for the emitted signal (like 2.4ghz, 5.8ghz etc)? Or a good spectrum analyzer can take care of this detection job? Would be hepful to read your advice. Thanks.
You may be interested in this deauther.com/ it will disrupt any WIFI based microphone and Cameras in your area
@@justanengineer5599 Thanks for your response. I did check the deauther tools before, but not sure if they are able to successfully block ALL the frequency spectrum (i.e 2.4Ghz, 5Ghz, 6Ghz (for wifi 6e latest). For instance there could be some rogue devices using the latest wifi 6e based transceivers for data exfiltration. Is there a deauth tool that can cover all of these frequencies?
deather is based on esp8266/esp32 chips so it works only on 2.4GHz
@@justanengineer5599 So is there any other alternative if one wants to deauther all other frequencies?
only with the PC and required software you can play on other frequencies like 5GHz. This is due to the fact that there are no microcontrollers operating on 5GHz, however ESP32-C5 is comming soon and will support 5GHz wifi
blog.spacehuhn.com/5ghz-deauther
does this only work with arduino pro micro? I wanna try it with Esp32 or maybe wemos d1 mini
no this one not, but try my cc1101-tool which supports Wemos D1 mini and has built in jamming capability. I am showing it in my newer videos
Hey, this jammer can block much fm at once or just one? Thank you
it can block single frequency at a time... but it can jump very fast between different programmed frequencies
For example in traffic jam?
you want other cars fm radios while in traffic jam, right?
@@justanengineer5599 yes
you should better buy fm transmitter that fits to car lighter socket. that would give you more fun :-)
Did you remove the SMA connector?
nope I got the board with antenna soldered
How to increase the power and then distance ?
use CC1101 module with built in LNB
hi. do ı need 8mhz or 16 mhz arduino pro mini or pro micro ?. thanks for your answer sir.
you need something that will work with Little S@tan library here github.com/LSatan/SmartRC-CC1101-Driver-Lib
It needs to have 3.3V outputs for TTL and VCC not to break CC1101 chip. Arduino Pro Micro or Arduino Pro Mini are the best because they have 3.3V. But only 8MHz clock versions
PSA: You cannot buy any CC1101 module and use it for any 300-348 MHz, 387-464 MHz, 779-928 MHz frequencies. Each frequency range requires different passive component design. It is in the CC1101 data sheet.
CC1101 modules are designed for specific frequency range. Other frequencies may "work" on a lab bench. In practice the signal quality will be terrible.
Check what frequency range the module is designed for before purchasing!
that is correct that is why two types of CC1101 board exists : 433/315MHz and 868MHz
@@justanengineer5599 how to distinguish them? Descriptions on Aliexpress are a bit confusing. On the same module
Working frequency: (module: 387-464MHZ)
And then:
315/433/868/915MHZ ISM band
CC1101: 387-464 MHz and 779-928 MHz
The 868 model usually has a single row of pins. The 433/315 MHz model has 2 rows of pins.
If you designed your own PCB couldn't you just select the path the RF positive and negative take with a couple of RF signal switches? Then you could just follow the datasheet to the recommended design of each path and have it use the one it needs. The only thing I'm not sure about is how much interference that would add if any. Theoretically it should work at least.
Posiadam CC1101 teoretycznie na 433 MHz (taki jak widoczny w 1:42), jak korzystając z biblioteki elechouse cc1101 wymusić korzystanie z 868.9 MHz ?
spojrz na ten kod źródłowy znajdziesz tam odpowiedź raw.githubusercontent.com/mcore1976/cc1101-arduino-radio-communicator/main/cc1101-radio-chat-v2.ino
musisz uzyc zmodyfikowanej biblioteki Elechouse od Little S@tan
github.com/LSatan/SmartRC-CC1101-Driver-Lib
@@justanengineer5599 próbowałem przez setMHZ(868.9), ale d..a :(
Hello, i hace used an amplifier and ir does not amplify me at all, i have taken the module from an 868 inhibitor, do i have to cancel the modulation part to be able to see my signal alplified? Nothing comes out for me at the moment. Except for how little the CC1101.
Thanks
does it generate the signal without an amplifier? Have you checked it with RTLSDR dongle?
@@justanengineer5599 yes, ir works correctly, but i need it to go further, since ir give me little for what i need.
What’s more, i have put an OLED screen and buttons to be able to modify the frequencies, i command Sleep and it stops, i modify the frequency and start it.
Thanks!!!
it looks like RF amplifier is not working correctly or maybe it is overloaded by the input signal.
@@justanengineer5599 I'll try things and if I find the solution I'll tell you, it must be silly but I don't see it.
What I have done has been to put an amplifier, reference GND and the signal that goes to the CC1101 antenna at the input of the amplifier, at the output of the amplifier, I have put the antenna and nothing changes. it still comes out the same...
Thanks for all.
Hello, I made an amplifier that increases the signal by 22db, it's really good, I can make a video and I'll pass it on to you.
Thanks
Скажите есть ли у вас программа Jamera -( hex) - на= PIC контроллер?
no I do not have experience in PIC microcontrollers
Can this jam helium network frequency 868MHz? Are you able to build something for me that can block them frequencies ranges plz
yes this can definitely jam lorawan from Helium Network on 868 MHz
@@justanengineer5599 thank you for the fast reply. Legend 👏👏
How do I make it output more watts? What RF output amplifiers to buy?
I can not give you exact solution but you may want to look for a 'rf amplifier' on www.aliexpress.com You have to look for something with SMA connector that matches antenna connector on your CC1101 board
@@justanengineer5599 Don't you also need to match the frequency for both the antenna and the amplifier? It seems that each antenna and amplifier have a frequency rating.
will it work with esp32
yes but only if you use version2 of the code and LittleS@tan library
@@justanengineer5599 now i can build my own flipperzero like device thx
what frequency do you use to block a radio signal the same as a human brain
Cant
I can't find pb,pd pins in my uno (ATMEGA328P)
really? PD (port D) are pins 0-7. PB (port B) are pins 8-13 :-) look here : www.circuito.io/blog/arduino-uno-pinout/
@@justanengineer5599 Thank you. I didn't know Arduino well, so I thought Arduino Uno didn't have pins I'll make it after watching the video😁
I want to use this circuit to disrupt the TV signal passing through the coaxial cable. Will this circuit work for me? or how can I update it?
coaxial cable is shielded and that prevents from such kind of signal disruption
how would i make a device using the cc1101 to clone car keys and garage doors?
it would be a variation of my project for CC1101 based radio communicator. You would need Arduino Pro Micro 3.3V/8MHz and CC1101 board. The code would have to be modified to listen radio sequence and then replaying it (ruclips.net/video/aRe3WXXtzLU/видео.html ). However first you need Universal Radio Hacker software and RTLSDR dongle to find out information about the keys you want to clone - modulation type, frequency, what preamble is used and so on ( ruclips.net/video/jziWQA8Wvp4/видео.html )
To conclude - in general it is not easy for novice
check my latest project on github : github.com/mcore1976/cc1101-tool
This is the tool you asked for. It is easy to do ultra cheap Yardstick One equivalent
Hi I just want to ask that if I use arduino Uno to to build this one and user transmitter NRF24L01
No it does not work with nrf.
What if you tune this to the cellular frequency like 3G and 4G would it jam it??
yes but short range
@@justanengineer5599 Can it be under 50 meters or if there's a way to lower the range to about 20 meters?
up to 1m I guess
@@justanengineer5599 that's better
Can I use Arduino Nano or Arduino Uno?
Arduino Nano or any different if provides 3.3V output and 8MHz clock. Look for v2 version of my code : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-micro-cc1101-jammer-v2.ino
@@justanengineer5599 i ordered a pro micro with 16mhz clock will it work ?
it will not work unless you provide 3.3v vcc to CC1101 board. Also you have to use this file for upload : raw.githubusercontent.com/mcore1976/cc1101-jammer/main/arduino-pro-micro-cc1101-jammer-v2.ino and attach SmartRC zip library to your sketch
can i use Attiny85 Digispark ?
unfortunately not. ATTINY 85 does not have full SPI bus. I have tried to make Digispark work with CC1101 module but I failed
Can be worked in vhf frequency?
uhf only
Does those kind of frequencies jam the cell phone 4G as well? By the way it is very great video and concept. I hope next video will be about small base Telecommunication stations instead of those huge ones that we see in the ground since you could make everything simple and much way smaller in size 💯💯💯
the CC1101 board can use frequency within 300-348 MHz, 387-464 MHz and 779-928 MHz ranges. If your cellular network uses some of them then yes, it can jamm cell phone when nearby.
Jak mozna sie z toba skontaktowac? Mozna prosic o jakies namiary?
w opisie kanału masz mojego maila
Szukalem patrzylem i nie znalazlem…
Jak chcesz zrobić taki projekt jak głupiego emaila nie potrafisz odnaleźć? Nawet w tym filmie jest on widoczny jak przeglądam kod programu.. Muszę wiedzieć czy rozmawiam z człowiekiem czy z jakimś chatGPT :-) Ale masz jeszcze jedną szansę - zajrzyj na mój github (masz link w opisie filmu) i przejrzyj choć trochę mojego source code w języku C z dowolnego projektu. W kilku pierwszych linijkach kodu zrodlowego jest mój email. Jak przejdziesz tą próbę to może będziesz w stanie się odpytać o więcej
Wyslalem wiadomosc na maila
can it be use to jam bluetooth device?
no. bluetooth operates on 2.4GHz while this device jams
Do u know of a device that is not diy and plugin or battery operated that i can buy for microphone jammer?
there are some devices called microphone jammer for usd 500+ you can find them on www.aliexpress.com
@@justanengineer5599 expensive!
Świetny film ! to jest dopiero powód do dumy z bycia Polakiem haha. Mam pytanie bo podczas kompilacji kodu Arduino IDE nie rozpoznaje "#include " i wyskakuje błąd : avr/boot.h: No such file or directory a doczytałem się, że kod autora "Panagiotis Karagiannis", na którym bazowany był twój kod działał jedynie na urzadzeniach z linuxem - czy dlatego to nie dziala u mnie? Jeśli nie to może wiesz jaki może być inny powód? Też warto chyba dodać, że używam ESP8266-12E. Ta płytka też działa na 3.3V i z resztą widziałem filmik, na którym ktoś używał tego konkretnego modułu z nią, więc jestem pewny że są kompatybilne. Może w kodzie to coś zmienia i to robi jakiś problem (?) Próbowałem także zainstalować tą biblioteke PANSTAMP o której mowa w komentarzach na początku skryptu ale znalazłem tylko jakieś archiwalne strony na których albo linki wygasły albo prowadziły do bibliotek arduino które nie działały. napewno jest jakiś prostszy sposób żeby uporać się z tym problemem ale nie wiem jak...
czesc sprobuj z wersja v2.ino i biblioteką SmartRC tamta wersja bedzie dzialac z płytka ESP. na stronie projektu SmartRC masz rysunek jak podłączyć. A w ogóle to polecam mój najnowszy film na którym jest coś znacznie znacznie lepszego ruclips.net/video/iPVckkTjsd0/видео.html
Work for Bluetooth?
works below 1GHz and Bluetooth is 2.4GHz. So it does not work for Bluetooth
HOW CAN I CONTACT YOU I HAVE A QUESTION I WOULD LIKE TO ASK YOU...
THANKS
GEORGE
my email address is in the channel description
It's possible to increase the 10mw power tx?
yes you need to attach RF amplifier board from chineese shops
@@justanengineer5599 Thanks 👍
What's the range of the jammer ?
100m