kindly check for the measurement of static discharge head, it should be measured from the center line to the end point of the discharge line. in video, you measured it from the end point of the volute or diffuser whichever the kind of the pump.
That's right. Both Suction and Discharge static heads are measured from the center of the pump as shown in the image in this link: (www.nationalpump.com.au/calculators/pumping-terminology/) Thanks
10:00 the expression may be not correct because any suction head helps the pump in the suction action of the pump but if it was suction lift it will stand against the pump So that we need to develop the term of Total Static Head which will represents the total head that the pump will work against To brief any suction head will help the pump but any suction lift will work against the pump plus the discharge head plus the residual pressure if needed
Head-is described as Pressure (at suction) × 2.31 ÷ Specific gravity; 1 psi is equal to 2.31 ft. إحنا بنقسم علي ال specific gravity علشان نحول الضغط ل head.
شرح جميل ومبسط جدآ يا هندسة متشكرين ❤
من احسن الناس اللي بتشرح فعلا والله
جزاكي الله خيرا وجعله في ميزان حسناتك وميزان حسنات والديك يارب العالمين
يسلم ايديك مهندسة❤
ماشاءالله ربنا يحفظك منتهي الابداع
kindly check for the measurement of static discharge head, it should be measured from the center line to the end point of the discharge line. in video, you measured it from the end point of the volute or diffuser whichever the kind of the pump.
That's right.
Both Suction and Discharge static heads are measured from the center of the pump as shown in the image in this link: (www.nationalpump.com.au/calculators/pumping-terminology/)
Thanks
راقيه
10:00 the expression may be not correct because any suction head helps the pump in the suction action of the pump but if it was suction lift it will stand against the pump
So that we need to develop the term of Total Static Head which will represents the total head that the pump will work against
To brief any suction head will help the pump but any suction lift will work against the pump plus the discharge head plus the residual pressure if needed
استفسار بخصوص قيمه ال constant = 2.31
بيختلف باختلاف نوع السائل ( الكثافه ) !!
Head-is described as Pressure (at suction) × 2.31 ÷ Specific gravity; 1 psi is equal to 2.31 ft.
إحنا بنقسم علي ال specific gravity علشان نحول الضغط ل head.
ممكن طرية تواصل .. محتاج استشاره في مشروع