I found this very helpful in showing an approach-a system for doing a drawing. There are so many videos that get bogged down in showing every detail of every function without showing the big picture. I know there are a number of ways to accomplish the same final result and this gave me a good overview of one. At first the speed was annoying but then I caught on that this is not "how to use each tool" but is "how to do a drawing." Thank you.
First of all, I really enjoyed your vodeo, you learn something new every day! One thing I was wondering is what units you work with? I am used to working with ft and in from the start so those numbers were the only thing that had me confused. and also how do you come up with the dimensions from before you start? i like the way it all fits together perfectly once you bring every section together! I have been wanting to experiment with this section method but the sizes and dimensions is still something i have to figure out as I'm going. Once again thank you! I really enjoyed your video!
Hello there! If you don't mind me asking some questions. I know most of the basic tools in AutoCAD but have never efficiently completed a drawing plan. Is there a reason you start out with separate rectangular shapes instead of adding one by one on the go. Do you have all the dimensions set in your mind when creating the shapes? They all seem to fit perfectly when placed together. I want to step my foot into civil engineering design, starting with mastering AutoCAD. Thank!
Welcome dear ... there are more than one way to draw a plan one of this is sections method like in this video and the other you can draw a big rectangle and cut it to the dimensions required ... surely I have all dimensions before start drawing .... best regards and good luck
I found this somewhat informative. I was interested in seeing the command structure upgrades. But the illustrator has a lot of wasted movements in accomplishing his outcome. I was so frustrated that I just had to comment. He should have use blocks for door & window elements. But, overall, I did gleam some gems of new features in this upgrade.
I used to be good at times at AutoCAD. It's been over a decade without practicing it and now i face a lot of problems when applying for a new job cos it's definitely asked and needed. I'll try to practice this one video, but it seems to fast! And damn, the new versions make me wanna die, i'm so out !
This is the greatest, fastest, smartest way to draw! Thank you very much for sharing this. I am your fan now! How do I follow your posts, Civil H? Thanks again!
After adjustments for the first time just click enter and select the lines and the shapes required ... next video I'll share explaining step by step in details...
its really a nice video. but next time instead of music you just give some explation about copying the offset and the dimentions. also one doubt... what is the outer dimentions??
I have a question on my autoCAD the tool bar or palettes whatever you may call it are to the side and not on top which I would find easier to work with. Could you help me and tell me how to set it up like yours i've been trying to find a way but i've failed I would really appreciate it thanks.
Great job sir but only problem you weren't ever explained what are you doing. I'd say just put some more efforts than that'd be fine whenever you do drawing then you should also put audio there ...well thinking you so much all this.
I found this very helpful in showing an approach-a system for doing a drawing. There are so many videos that get bogged down in showing every detail of every function without showing the big picture. I know there are a number of ways to accomplish the same final result and this gave me a good overview of one. At first the speed was annoying but then I caught on that this is not "how to use each tool" but is "how to do a drawing." Thank you.
Great ... That's what I wanted from this video
Thanks for your comment and this is a great moral support to me
This is my first floor plan drawing and I did!!! Thank you so much for sharing! Greetings from Panama City.
Thanks alot dear and you are welcome
fantastic ! a unique and speedy approach.
Thanks dear... I'm increased speed of show a little bit by program video adjustment
Great video thanks for sharing!
Your are welcome
First of all, I really enjoyed your vodeo, you learn something new every day! One thing I was wondering is what units you work with? I am used to working with ft and in from the start so those numbers were the only thing that had me confused. and also how do you come up with the dimensions from before you start? i like the way it all fits together perfectly once you bring every section together! I have been wanting to experiment with this section method but the sizes and dimensions is still something i have to figure out as I'm going. Once again thank you! I really enjoyed your video!
You are welcome dear... Im using meter units and I have all dimensions previously
Thanks for your comment
great music :)
Ill took a long time to choose of appropriate music
That was a good drawing you got there.
:D
Thanks dear
man, so much work just for the floor plan one small house
This is one of the drawing methods called the method of drawing sections
Thanks a ton !!!
Thank you so much dear
it's useful to me as the student first time try to drawing floor plan, your floor plan so awesome.thanks for the video.it's help me a lot.
You are welcome ... If you have any question or suggestion please comment
Civil H maybe floor plan in 3d max? haha ..I'm learning 3d max now..
Great video man
Thanks
Excellent video for 2D Floor plan drawing. I like your tutorial and presentation
Thank you for your beautiful words and this is what encouraging me to make more
Hello there! If you don't mind me asking some questions. I know most of the basic tools in AutoCAD but have never efficiently completed a drawing plan. Is there a reason you start out with separate rectangular shapes instead of adding one by one on the go. Do you have all the dimensions set in your mind when creating the shapes? They all seem to fit perfectly when placed together.
I want to step my foot into civil engineering design, starting with mastering AutoCAD.
Thank!
Welcome dear ... there are more than one way to draw a plan one of this is sections method like in this video and the other you can draw a big rectangle and cut it to the dimensions required ... surely I have all dimensions before start drawing .... best regards and good luck
NIce one thanxx
Thanks dear
Thanks buddy.. Very Helpful.
You're welcome 🌹
Good..thanks for helping me pass the internals! :p
It's useful to me .Thanks for upload this video .
You are welcome ,thanks for your comment
the music got me
Your are welcome
I found this somewhat informative. I was interested in seeing the command structure upgrades. But the illustrator has a lot of wasted movements in accomplishing his outcome. I was so frustrated that I just had to comment. He should have use blocks for door & window elements. But, overall, I did gleam some gems of new features in this upgrade.
Its just a small plan
Good job. Thanks alot for your video
You're welcome 🌹
I used to be good at times at AutoCAD. It's been over a decade without practicing it and now i face a lot of problems when applying for a new job cos it's definitely asked and needed. I'll try to practice this one video, but it seems to fast! And damn, the new versions make me wanna die, i'm so out !
Pause the video in each stage and practice
I know lad. The 1st 10 minutes of this video took me over 30 minutes to do it! Anyway it's good (y)
This is the greatest, fastest, smartest way to draw! Thank you very much for sharing this. I am your fan now! How do I follow your posts, Civil H? Thanks again!
Thanks alot dear ... Subscribe to my channel
thanks for sharing. could you please explain how do you use trim function? it seems you did't select objective one by one, it is very convenient.
After adjustments for the first time just click enter and select the lines and the shapes required ... next video I'll share explaining step by step in details...
Jia Wu
tr enter enter select exit
Simply apply the cammand "TR" and hit double space and after that click rapadly on the lines which you have to trim
Thanx :)
Well done. Thank you for sharing.
You are welcome and thanks for moral support
Thanks for the video, brother..
Thanks for moral support bro.
Like this...
And.....
I'll try this....
good works good lack
Thanks alot
BRO i like it so much .and really enjoyed it with music
You are welcome
+Faisal Khan Thanks a lot
thanks for upload this video ......
You are welcome and thanks for your comment
At 2m 42 sec.. I can't work out how to move the object and then extend?
its just activate extension in snap settings and move object from properly corner
its really a nice video. but next time instead of music you just give some explation about copying the offset and the dimentions. also one doubt... what is the outer dimentions??
OK dear ... thanks for your comment
I have a question on my autoCAD the tool bar or palettes whatever you may call it are to the side and not on top which I would find easier to work with. Could you help me and tell me how to set it up like yours i've been trying to find a way but i've failed I would really appreciate it thanks.
Which version do you have?
It is better to use Short commands rather then finding those command in tool bar it would be more convinient
great job on your video. Where can I purchase and download the app?
From official autodesk website
br which country r u from and only this tutorial u made..or there r more?
Im from Iraq (Baghdad) this is the first tutorial
how you are cutting that boxess
Do you mean edges or which one
Arrows and text when applying dimensions appear too big. Someone know how change size?
Video was good but please explain it bcz I'm new to drawing... If u don't mind please suggest me some more drawings to improve my knowledge
Well next video i will try to explain the plan drawing step by step by text appear with selected tools
tell me, how to create layout grids like revit architecture in autocad.. is it possible to draw grids like revit in autocad? if yes then tell me how?
I"m not using revit
wow what a plan ***
Thanks
nice video...but i want to know which unit did u used?
Thanks for reply
+Jwan MR95 Thanks, I used metric units but it doesn't matter you can change it
You are welcome
Don't u have to show pillars on plan? In Nepal u have to show pillars.
This is simple 2D plan
Great job sir but only problem you weren't ever explained what are you doing. I'd say just put some more efforts than that'd be
fine whenever you do drawing then you should also put audio there ...well thinking you so much all this.
Thanks... next i will explain
Can you give me a link to download the final drawing file so i can practice with it. thank you.
You're welcome, I'll try to upload it and give you the link.
What is unit you have taken in this?
meter
could you make a video tutorial for AutoCad?
There are hundreds of tutorial video on youtube
what did you make?
Floor plan
ITS NOT A TUTORIAL IF THERE IS NO SOUND!!!!!
I'll try it in the next video ... sound or text on video
do you know the name of the first song
Sorry I don't
No025 by Relaxdaliy
do you have lessons?
This is the first video and i will try that the next will be more
how to culculate quantaty in autocad ?
Which one you mean?
Too fast explain
Pause the video in each stage and practice
dear need explanation. music destroyed your plans
OK dear i will explain on next video
awful music wtf.