Это видео недоступно.
Сожалеем об этом.
Explore All 21 Types of Sweep surface commands In CATIA I Surface Design in CATIA
HTML-код
- Опубликовано: 10 авг 2024
- ****Here is the link to the Catia V5 Master Course****
www.udemy.com/course/catia-v5...
Huge discount if you use this link to enroll...
------------------------------------------------------------------------------------------------------------------
There are 4 types of Sweeps. Sweep commands are extensively used to create complex surfaces.
1. Explicit
a. With Ref Surface
b. With Two guide curves
c. With Pulling direction
2. Line
a. Two Limits
b. Limit & Middle
c. With Reference Surface
d. With Reference Curve
e. With Tangency Surface
f. With Draft Direction
g. With two Tangency Surfaces
3. Circle
a. Two Guides
b. Two Guides & Radius
c. Center & two Angles
d. Center & radius
e. Two Guides & Tangency Surface
f. One Guide & Tangency Surface
g. Limit Curve & Tangency Surface
4. Conic
a. Two Guide Curves
b. Three Guides Curves
c. Four Guides Curves
d. Five Guide Curves
Very nice explained and easily understandable. And also Pls upload videos of another and all surface commands like this
Very nice explain sir ❤
Excellent explanation about Sweep command in Catia, thank you for your efforts.
You're very welcome!
Thanku very clearly explained
Thank You very much to sharing. My big problem was this. Beautiful tutorial. Like.
Glad it helped
Nicely explained sir
Thank you
Nicely explained 👍
THANK U IAM PREPRING FOR JOG
Welcome brother
sweep command explain so nice sir
Ok. Thanks
next lecture comming soon sir
at 10:22/49:17 the pulling direction? why perpendicular to the surface instead of along the guide of the surface that will be created . it seems to me the pulling direction should the x axis or y axis this is somewhat confusing. I hope you are still answering questions after 2 yrs. Thanks for the video it is excellent really.
Nice video by #SiemensCADSolutions
At the starting sweep comand you are creating planes at the ends of the semi circle and then drawing lines .is we can use sweep command without creating planes at the ends of the semi circle? We are getting element to be non convex element
Check this channel #simenscadsolutions
CAN YOU PLS TEACH ASSEMBLY DESIGN SIR
What is the meaning of connex error in surfacing
*****Here is the link to the Catia V5 Master Course*****
www.udemy.com/course/catia-v5-3d-design-modeling-course-for-beginner/?referralCode=6277CD76938D667CBFC3
Huge discount if you use this link to enroll...
everything is under the partbody, thats not well organized