@Minusonegojira68 I'll do one better, Cherno isn't available for preorder, nor has been confirmed as the next one XD. It could also be Gipsy Danger, Striker Eureka, Coyote Tango or Gipsy Avenger.
1:57 1:58 mjvjbyhjvhhubuhhuu 2:02 y no se si me lo puede mandar a mi mamá y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso pero no me gusta que me diga que no me gusta que le diga algo así que yo lo hago y lo siento todo
crimson thyphoon aparecio tan poco en la pelicula pero tuvo tanta aceptacion por el publico que hasta incluso hoy en pleno 2024 siguen sacando figuras sobre este robot eso es increible
Yeah man. Good bearings? I dunno im not that great woth engineering or whatever. Just a uuuh, kinda sorts not really educated guess. Or somthing.... Anyway. *Bęäňş ãřə §äčřēđ.*
Absolutely beautiful figure 😑👌 though it would have been nice to see a little weathering done on the armor plating. I can’t wait to see more content 10/10
The weathering would have been nice. However, I feel like the point of these figures is to somewhat show the Jaegers in their prime - well-maintained, gleaming and fully functional, before the events of Anchorage.
something that never made sense to me was that crimson typhoon had 3 arms and not 4, i mean each pilot of a standard jaeger can control 2 limbs why not make the 3rd brother control 2 instead of not doing much and getting the easy job
It already has a core for one arm and one more for the two arms and finally a third core to power it up making another arm means making another core at least from what I think and that's pricey as heck no wonder they only made one for each country near the pacific oceon
From a child I was 14 years old I wanted to have this character because I liked its form and its appearance in the film " Pacific Rim ", I do not know if I must buy it but I shall hold on more.
Fun fact about crimson thypoon, it actually has 3 completely different reactor, une for the rigth arm and another une for the left arms, and the third it’s is source of energy
This looks AMAZING! Do you know if it is in scale with the Bandai SOC GX-77 Gypsy Danger? Bandai did such a great job with that figure it is such a shame they did not make any more Pacific Rim figures, This right here could be the answer. Thanks again for posting.
In the beginning but that saw blade looks so sharp like you will get cut but be careful though it's kind of cool it goes spin forever like a fidget spinner
If this is made by an advanced toy company kinda makes you wonder why isn't the military advancing with armored suits like this rather it being drones or actual mini yager suits..!! Hopefully soon in the making.. ❤❤❤
It isn't everyday when Yeagers have no three pilots just only Crimson Typhoon but I like three Pilots to control the Jaeger the only favor I like is Crimson Typhoon an ❤ Azur defendant
I just realised, it's weird the head LED is blue, all the promotional images and other reviews show it in orange which is movie accurate. Did they change this last second?
Subscribe our new channel！👉 bit.ly/3ULDT2w
Donde lo compraste? quiero uno
The saws spin so smoothly, I love it!
Please get cherno alpha next please get cherno alpha next
@Minusonegojira68 I'll do one better, Cherno isn't available for preorder, nor has been confirmed as the next one XD. It could also be Gipsy Danger, Striker Eureka, Coyote Tango or Gipsy Avenger.
it doesn't exist at the moment.... there's only one gipsy from soul of chogokin and that came out years ago while they cancelled their crimson.
@@drenx87 ;-;
They haven’t made this one yet.
They don't have a cherno alpha like that
I would love to see Striker Eureka next, btw the detail on crimson look so good
1:57 1:58 mjvjbyhjvhhubuhhuu 2:02 y no se si me lo puede mandar a mi mamá y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso y me dijo que no me había dicho nada de eso pero no me gusta que me diga que no me gusta que le diga algo así que yo lo hago y lo siento todo
crimson thyphoon aparecio tan poco en la pelicula pero tuvo tanta aceptacion por el publico que hasta incluso hoy en pleno 2024 siguen sacando figuras sobre este robot eso es increible
And
???@@Fantastickiryu
@@Fantastickiryupeople love you:)
@@Taylorse-d9u thank you
es cierto el es mi jeiguer favorito
these details.. so perfect
If there were a Gipsy Danger version I would buy right now!
its on pre order right now
Fr
bro it costs more than 5k usd
@@PrKa493 it cost 100 don't bullshit
Same
He is my fav out of all of them
Very well recorded man..
Most people spend the hole vid building to show a hint of
The final price for half second..
That’s how you do it”
He is my fav out of all of them
@@maryalarcon7574 agree!!
no explanation needed ..
cheers”
😂😂 I dont know why but the long a$$ full sequence of the saw spin had me dying.
This figure looks so intricate and I love the spinners. It’s massive in scale. I wonder how the die cast feels. Hopefully nice and solid
Wow those saw blades spin for a long time
Yeah man.
Good bearings?
I dunno im not that great woth engineering or whatever. Just a uuuh, kinda sorts not really educated guess.
Or somthing....
Anyway.
*Bęäňş ãřə §äčřēđ.*
This men needs the 1 millions subs
Absolutely beautiful figure 😑👌 though it would have been nice to see a little weathering done on the armor plating. I can’t wait to see more content 10/10
The weathering would have been nice. However, I feel like the point of these figures is to somewhat show the Jaegers in their prime - well-maintained, gleaming and fully functional, before the events of Anchorage.
Wow that arm blades can connect
something that never made sense to me was that crimson typhoon had 3 arms and not 4, i mean each pilot of a standard jaeger can control 2 limbs why not make the 3rd brother control 2 instead of not doing much and getting the easy job
It already has a core for one arm and one more for the two arms and finally a third core to power it up making another arm means making another core at least from what I think and that's pricey as heck no wonder they only made one for each country near the pacific oceon
God I wish this was 6 inch scale scale
That would be just too perfect!
This one is about 7 or 8 inches
Pacific Rim is my favourite IP.
From a child I was 14 years old I wanted to have this character because I liked its form and its appearance in the film " Pacific Rim ", I do not know if I must buy it but I shall hold on more.
Fun fact about crimson thypoon, it actually has 3 completely different reactor, une for the rigth arm and another une for the left arms, and the third it’s is source of energy
That’s really cool
Beautiful. For a lower budget, you should get the one by lingjihun. Its smaller but its just as good.
Ahh, i almost hoped you use the pacific rim theme song for the show time
This looks AMAZING! Do you know if it is in scale with the Bandai SOC GX-77 Gypsy Danger? Bandai did such a great job with that figure it is such a shame they did not make any more Pacific Rim figures, This right here could be the answer. Thanks again for posting.
I would buy the whole set this thing is just beautiful and very detailed
Also crimson typhoon's big claw was actually can transform into the thundercloud formation ❤
In the beginning but that saw blade looks so sharp like you will get cut but be careful though it's kind of cool it goes spin forever like a fidget spinner
Wow crimson typhoon
It's missing a 3rd Saw for the larger arm
In the movie Crimson used 3 Saws against Otachi
No, the larger arm transforms into the blade. However, he did not show it.
@LocalPepsiLover incorrect, it's was a buzzsaw. Just bladed
no I meant the same thing@@crossyfirezx9659
Sad it isn’t included as a function or an interchangeable.
Btw crimson was actually supposed to survive against otachi but that was cut from the script.
That looks like a cool model 😎 👌
Bro said legs like hes interested 😂 10:52
Great looking piece. Would have been good to see it on the base and some pose ability.
“Oh how this looks cool I wonder how much it would cost- 200 BUCKS!?”
Lol this figure looks cool ill buy it soon even the arm saws move i love crimson typhoon😊❤
My favorite jaeger is Cherno Alpha but I absolutely love this!
En dónde lo compraste quiero uno así
I love your videos so much
I wish they would have made a sequel to this amazing film.
Perfection
So cool but i wish crimson typhoon have 4 arms instead of 3
In the movie they were gonna do it but, the directors couldn’t find 4 identical twins so they stopped at three.
10:51 buddy was about to violate crimson and just decided "legs"
it would be great to see a cherno alpha like this. Great video.
Crimson Typhoon my beloved
Crimson typhoon is my favourite Jaeger of All time
el verdadero "un gran poder conlleva una gran responsabilidad"
Nah bro I love pacific rim thank you for reviewing this ❤
Crimson typhoon its so beautiful
You spin me round round mei be round round
That look sooo gooood. I wished the color was more 'Crimson' as in the movie and the light for Conn-Pod or the head, should be yellow not white/blue
If this is made by an advanced toy company kinda makes you wonder why isn't the military advancing with armored suits like this rather it being drones or actual mini yager suits..!! Hopefully soon in the making.. ❤❤❤
Now all you need is Cherno, Striker and Gipsy
THE BLADES ON THE SAW HANDS ARE STRAIGHT UP METAL
dude that's absolutely fatal
Out of all of them typhoon was my favourite didn't know it was a model
same here but newton got him packed up like mcdonalds 4 piece chicken nuggets on a tuesday afternoon
Infinity studio should also make a crimson typhoon based on the concept art version with normal legs.
I think it'd be so much cooler if the stand was the actual stand they used for transportation across the shatterdome in the movie
Tu vaut rien
Owhhh mannnnn,,!! Damnn itt,, 😮😮😮😮takee my car and give me the typehoon
This looks amazing bro! What camera and mic setup are you running? 💯🔥
I want a good striker figure so bad 😭. I hope these guys make it🤞!
Did everything very well until last minute😂
Where was this when the film came out, 15 year old me woulda lost his mind 😂
I wanted this badly. Who made this please, and what scale is it?
It isn't everyday when Yeagers have no three pilots just only Crimson Typhoon but I like three Pilots to control the Jaeger the only favor I like is Crimson Typhoon an ❤ Azur defendant
But bracer phoenix has a three pilots too
Awesome
Pretty sure the left arm is supposed to have a saw as well.
holyyyy, it's super coolllll. Can You do the Gipsy Danger, Plsssss!!!!!
0:43 yeah who likes finger prints on this guy
Wasn’t there supposed to be a third spinning blade for the left arm
The only nitpick I have is that Crimson Typhoon has 3 saws not 2. Other than that absolutely beautiful figure.
holy shit too much detail on this figure and it looks 🤑🤑🤑
You got free finget spinner 👍
Awesome❤
0:30 COOL
We should get a 10 hour version of the spiny
I just realised, it's weird the head LED is blue, all the promotional images and other reviews show it in orange which is movie accurate. Did they change this last second?
Esto es como escuchar un asmr
True
Amo los titanes del pacifico, y justamente ese es mi titan faborito
Alguien me puede decir dónde lo puedo comprar!???? Es hermoso 😻 necesito saber dónde lo puedo comprar y como cuanto sale🙏🙏😻
I've bought him from ShowZ, still waiting for them to ship it lol
Es asombroso donde lo compraste?
awesome
Wow❤awesome⚙️😁👍🏿🔧
For anyone who loves the sounds
👇
i hope Striker will apear soon 😄😍
Where do you get that because I really want it and how much does it cost?
Fidget typhoon 🤔
The blades are still spinning
As Spongebob once said.... "IIIII NEEEEEEEEEDDDD IITTTTTTTT!!!"
I would add some damages like in the movie 😅
God bless you too 😌
Do more pisific rim mechs
Please, get the legendary GIPSY DANGER for next
beautiful
Cuánto está y dónde la consegiste
Such a squandered IP. I watched the netflix animation and it was OK, but this was a billion dollar IP if ever there was one.
ハンドスピナー🌀
imagine a romeo blue figure like this 🥵
What batteries are needed for LED lights?
I want this so bad!
But it’s so expensive😭
Cómo lo conseguiste por qué yo también quiero uno
*+ 1 item to birthday list*
where did get that? cuz my sons birthday is coming
do you know thwe battery size by chance? thanks