Spark-Gap Generator (SGG)
HTML-код
- Опубликовано: 26 июн 2010
- Have scaled the spark gap generator (SGG) using J.Naudin's KapGen schematic and simplified it as possible -- no diodes, no caps, no ground, even removed a copper loop from inside; just SG from MOT to coil in series with 10 150Wt REGULAR light bulbs.
Very bright, very hot, and yes, it's time for measurements...
Thank you for the info.
nice setup.simplified too...
I like this very much!
And the music as well :D
fantastic job!
Wow:)
Jesteś PRO Mopozco! ;)
Thank you!
no capacitors in this setup, coil does work as a cap;
i like your thoughts about "add small drop of current AT EVERY SPARK" (!)...
cheers
Музыкальное сопровождение порадовало!
Hi, Merry Christmas. Thank you for your advice. Did you ever try to put the coil attach to a generator, and what comes out feed a motor that run the generator and see if there is extra power to light a bulb or something like this? Buy the way good job with the Tros generator
Your design seems to prove a theory that the copper coil on its own... Already holds some electrons while at rest...Therefore the spark gap oscillating for instance at 20khz....Would add that small drop of current AT EVERY SPARK...THAT IS....20 000 drops more then what is inputed every second, if I understand it correctly!!!! Cool!!!! ;-)))
Nice video! Keep up the good work!
73 de VA6POP
can you give schematic for that circuit?
many thanks
Thanks.
Very fine!
how much is the inout current and voltage by this video?
thanks
Wow!
Transformer. Light bulbs. All new discoveries.
Thanks how does a spark gap increase a voltage or amperage?
God bless.
Hi, did you use solid wire to build the coil?
@TheMrFunkytoes
thank you, Fun;
unfortunately i did not see Kapanadze schematic, seen many speculations around but not detailed one;
see, the fact that for so many years it's still in "show" mode tells us there're some problems there, light-bulbs alone will never give a real picture, and i have even motors running from SG system, but it's still no ^1, it's HF HV DC oscillation;
but you can find many others builders who claims "working OU", maybe they will give you right answer...
cheers
Cool
that's right, 10 bulbs by 150W each,
but are they lit as 1.5kW ?
have you seen light of 1kW lightbulb?
hi Igor, I don't understand why did you remove the internal bar from the big coil, what is the function? thanks
how to lower high voltage to 220v 50hz or 300v DC voltage.It's a tough math problem
What I DON'T get...
Is the end of that video, where you managed to re-light the bulbs AGAIN but with what looks like NO INPUT CURRENT (there are no capacitors, right!?) !!!??? I'm confused!!!
sure, i will, when it gets interesting, otherwise there's nothing to show...HF transformers...
cheers
Hi, friend. I am trying to replicate your wonderful system. Do you have a DC or an Ac input. And how much it would be? Thanks for your time.
somewhere 110v 4a
not OU though...
cheers
Ever tried powering your house with one? Could you...Once the unit feeds itself!???
This proves the microwave oven transformer is responsible not the spark gap gen.
who told you there's 1.5kW output?
Игорь а если МОТ запитать от акумулятора через камутатор от авт.зажигания получится такойже результат?
думаю не хватит мощности; эти трансы - звери ....
Thumbs up for the music....I've heard too much rock with no theme
+Miner4aheartofgold
U R right, it's just a requiem for OU :)
Indeed YOU NEED a power source to get the process STARTED!
;-D
But my statement was more to the effect that AT SOME POINT...
It has to be CLEAR that the machine AUTO-FEEDS !!!
Otherwise you're just lighting 10 lightbulbs from the wall socket!!! LOL
Brilliant YES....
But not the kinda brilliance I'm looking for, if you catch my drift!
;-p
Best Regards,
The "till then SKEPTICAL" Droidcrasher ;-p
This is similar to Carlos Benitez energy generator...
>yes, it's time for measurements...
do this
Is this overunity?
no;
alas, there's no such thing like OU exists.....
@Mopozco
Sorry you lost me threre, now I see you mention it is time for measurements.
But so far as I can see no input or output measurements are given so far, so what I am saying I guess is people shouldn't assume that they can get OU with the modifications you made as you might not have OU. Hopefully you do and your effort looks pretty cool but without measurements not very useful.
i'm not claiming anything (till the further notice lol);
so, wires are part of studying process;
no one can run anything without wires from outside (other than one video by Kapanadze, and many fakes on u-tube),
real energy exchange has to be done in presence of power source and utilization system, at least i see it in this way...
cheers
Здравствуйте увожаемый Игорь!
Я к стати тоже Игорь)))
Пожалуйста ответьте, вот с такой несложно сборки есть прибавка или нет? Сколько потребление и сколько выдаёт? Будьте добрым скажите как оно на самом деле...
привет;
на самом деле ничего тут военного нет;
ВВ свечение на высокой частоте разряда; свечение это не мощность ! .... потребление всегда больше выдачи ...
@@IgorMopoz ок, спасибо
is this overunity?
no, it's not
Igor Moroz thanks, but i have realized it is.
sorry, buddy, OU does not exist.... yet :) ....
Did I miss something? There is no indication of the input? And the output must be guessed at. It is clear that this circuit can power light bulbs while not doing anything out of the ordinary (as was my result) so showing glowing bulbs with no known input is near meaningless.
+Igor Moroz to easily loop the system, ****PULSE POWER BACK INTO THE BATTERY AND OR CAPACITOR****
Interesting. Have you made such a device that you can buy ?. I'd be interested.
High frequency is the Key. Forget about 60hz. Use Z.V.S to easily get upward of 60kzh with the high voltage it will produce. Let the weight of your primary be 4 times less than the secondary wire. Or say 1/4 of secondary.
Why you need high frequency is because of rate of charge pump. Also you need H.V of 3kv minimum to assist the H.Frequency to attract the free electrons in the ground.
thx!
not yet (lol)
free energy is too expensive (lol)
cheers
sorry to say, siracusa, but don't waste your time, i would never abandon this project if it had any potential as OU;
yes the input is AC
well, it's the same wire but 3 winding as shown on the sketch, similar to "coupling" - watch?v=C80E3-8aOlU
nothing's new under Moon lol
Did people forget how to narrate?
I got more out of the guitar lesson, thanks!
Craig Stock
forget about it; it was so long ago.......
soon this one will be deleted too
cheers
Igor Moroz don't delete bro this is important stuff
You play guitar better than me. I like it. But i did not understand what you want to say with this video. Can you be more informative ? Like J.L. Naudin for example ?
alas, it's not me playing, i just admire a talents .....
yes, just a tests, tesla, naudin, bedini, etc; nothing special ....
++
BUT, how much is your INPUT power? :) And finally, how much is your COP? You need to measure and write COP before posting this video...
"...AUTO-FEEDS...." (lol)
no such things exist yet (lol), at least no replications...
when you and me would be able repeatedly to replicate each-other's versions of self-sustaining systems, then we can talk about AUTOFEED...
cheers