Haiboxing Ravage 16889 Brushed vs Brushless 2S & 3S LiPo Speed Test
HTML-код
- Опубликовано: 29 сен 2024
- The results might surprise you! You guys asked for it! I test 2S & 3S LiPo's in both the Brushed and Brushless 16889.
Buy the Brushed Version on Amazon Here:
amzn.to/2MfTebl
Buy the 3S Lipo Upgrade Here:
amzn.to/3CCryTI
Buy the Budget 3S Lipo Charger Here:
amzn.to/2Fmjqy1
Buy the Brushless Version on Banggood Here:
www.banggood.c...
Buy the Brushed Version on Banggood Here:
www.banggood.c...
Buy the Oil Filled Shock Upgrade Here:
www.banggood.c...
Brushed 2S Speed Test: 1:26
Brushed 3S Speed Test: 3:25
Brushless 2S Speed Test: 5:46
Brushless 3S Speed Test: 8:18
413RC T-Shirt!
www.redbubble....
413RC Ebay Store:
www.ebay.com/s...
Best Budget RC GPS Under $50
amzn.to/2AR9WYJ
Allen Wrench Kit:
amzn.to/2Eik923
Cordless Screwdriver:
amzn.to/2P21GZN
Allen Key Kit for Cordless Screwdriver:
amzn.to/2ErqCbc
Parts Bin Organizer:
amzn.to/3g2zQse
ARRMA Senton 3S Battery:
amzn.to/3j0QHO1
ARRMA Senton Sealed Bearing Kit:
amzn.to/2CwG1WP
ARRMA Senton Adjustable Motor Mount
amzn.to/3evkkU2
Haiboxing Rampage
amzn.to/3dnJMuQ
Haiboxing Ratchet Shock Upgrade
amzn.to/2SFxs15
Haiboxing 2S Lipo Upgrade:
amzn.to/2YLQoie
Haiboxing 3S Lipo Upgrade:
amzn.to/3c2d4Pm
My Lipo Battery Charger:
amzn.to/3dlR9Tj
JST Plugs:
amzn.to/3caGDhr
Deans Connectors:
amzn.to/2A5Ro6L
CAMERAS I USE:
Tamron 17-28mm
amzn.to/2FTrpCo
SONY A7RII:
amzn.to/346s5wn
Lens:
amzn.to/3aHkJBX
RYLO 360:
amzn.to/2wZfj6w
GoPro Hero Session:
amzn.to/2X7n0m0
GoPro Hero 2018:
amzn.to/2X4k5dL
RC Insta:
413RC
Personal Insta:
jlazz447
Business Insta:
jlazzmedia
*Links above may be affiliate links.
I just ordered the brushless 16890, should be a lot of fun, even with the stock battery. Good video, very nice footage!
Thanks for watching!
@@413RC I have the same car, so does it support 3s battery? Is it safe and would not break the car with that battery?

@@josejsjsksks1266 Run 3S at your own risk. I have run mine on 3S with no issues but it is not rated for 3S i believe
@@413RC vale gracias por tu ayuda a lo mejor más adelante pruebo es impresionante lo que cambia la velocidad
@@413RC May of missed it but what version of the brushless was this? the 24xx or 28xx sized brushless?
Excellent video bro!! I might take my A979-b to the same parking lot.. Springfield in the building!! 💪🏽💪🏽
you know where this is?! lets bash!
Yeah bro, I’m not too far from there.. oh and do you know Gama? He said he know you.. HMU
Awesome. It handles 3S. I didn't know. I bought the brushless version from Aliexpress, but never came. Got a refund and ordered the brushed, Amazon version. I was kind of sad I missed the oportunity to get the brushless version, but I'm glad to see it can gain some speed with a 3S battery. How hot is it OK to run it? Mine gets hot(ish) while bashing, but the top fan hole on the motor is covered with the heat sink. It's quite useful to keep dirt out of the motor, though.
Damn that stinks about AliExpress! If it’s too hot to touch it’s too hot to run. Let it cool down in between packs and just check it now and then while running
@@413RC I'll doble check. Should I get and try a 3S battery and maybe slide the heat sink to let some more air into the engine? Or is it too much of a risk? 😅
@@DanielpazTQ you could try it! Depending on where you are running it. You could probably run a motor fan from the ESC light connector also
@@413RC oh that's a great idea. Is it the motor the hottest thing or does the ESC get hot, too? I guess I'll visit a local store and try to find the parts first, haha.
@@DanielpazTQ For a budget car like this i wouldn't go spending a lot of money on it lol. but when i drove them i believe it was the motor that got hotter than the ESC.
Nice video! Pls, what camera are you using to get the awesome slow motion shots in the water?
Thank you!!! It’s a Sony a7rii. Way outdated since shooting this video. It was shot at 120fps
@@413RC Wow, I would never have guessed that this was shot in 720p. It's all about the bit rate isn't it. I shoot on the Sony A7iv and was worried about dropping down to 1080p to get high frame rates but after seeing this I think I will be using it more often. The shots look super clean! I guess you were manually focused on a spot in the puddles?
@@The_RC_Family Exactly how i did it! I guess it helps that I export in 1080p so the 720 footage gets upscaled
whats the best quick charger for these guys?
I use this charger
amzn.to/3dlR9Tj
I thought 3s wasnt recommend with this?
It’s not lol
@@413RC sounds like all you need is a heatsink fan on the motor and maybe fan on esc and your golden.
Can 16889a pro use a 3s without any upgrades? Anyone please tell me.
Yes
Are the 3s batteries rechargeable
Yes
@@413RC how did you put a 3s in it without it breaking
@@ducky_plays4185 ESC handled it fine
Hi, just ordered one of these, and oil shocks upgrade! How long do you think the esc and motor would last on 3s? Have you used it much more on 3s lately?
AWESOME! great choice! I think the biggest thing would be to watch motor temps. if you plan on running it strictly on 3S give it some time to cool down in between batteries. you could probably install a fan also
@@413RC ok great, didn't think of using a fan.. thanks.. 👍
Yes, that' what I expected for both the trucks. I have a Volcano16 brushed and it's almost exactly what your brushed version does, and I have a Gool 16889a Brushless and it's about the same as yours. These little 16th scales are pretty neat. They'll take a beating as well. I'm upgrading the Volcano16 to all metal as we speak. I've already upgraded the shocks and have the metal axles and diff kits. And I have the metal pinion and will replace them when they blow. Nice little trucks you have there.
Nice body guard lol
Hi, what's the colour of your esc on the brushless? As mine has a red one, and it doesn't like 3s.. goes into reverse for a second under acceleration, stripped a gear, and don't make metal ones of the gear I broke lol. Need a better esc
Actually I see yours is red too. Typical, must be unlucky.
😦
Fun fun fun! Love that little brushless truck - think I need to get one
Its definitely fun! & fast!!!
what esc and battery and what other parts you would recommend for 3s STABLE build ?
Great video
Tbh I haven’t had any issues with 3S on the stock electronics
Awesome video man, love the brushless version on 3s, it rips dude. That intro is dope tho 😸😸
Thanks dude!
I have a normal 16889. Brushed ESC and Motor. Can I use 3s or will it overheat and break?
@@g09skinnyboy watch motor temps. Give it time to cool down in between batteries
Hi, i tried plugging a 3s onto my 16889 brushed and the car is not able to bind to the controller. Seems esc on mine cant handle 3s voltage. LED light just kept on blinking
@@sooolion9820 they may have changed the ESC to not be able to support 3S any longer
Nice i got mines and its amazing cant stop using the truck usually with the morning cofee and run lol great vid jeff keep it up ill b waiting for my brusheless one today lol
LOL! I thought you sold it!
Where do get the yellow one? The color in your link is different.
New sub here ✌. You just made me want to see how fast my rampage goes. It has steel shocks and axle upgrade.
I'm sure you saw kevin drop his from a drone.
Nice work! I just finished up a review for haiboxing rampage on my page
I'll check it out!
Hi are you using 11.1 volts 3s on a 7.4volts esc and it still work? Thank you!
Yes I am. Some can handle it
Would you buy a DeeRC or the Haiboxing?? They're both around the same price in Canada.
HBX!
I would never Run the car / truck in water, to risky if you ask me!! But the battery test was Great!!
Thanks for watching! Check out some more of my budget basher videos!
I wouldn't put a 2S 15C....you should not go down with the C rating, less discharge won't be good indeed! why you didnt' try a 50-80C? another story
I use what I have laying around
@@413RC the battery in your video (red one) isn't the one in the link?
thanks for your answer
Good stuff, new to the hobby, so your info is very useful.Thanks
Welcome!
This HBX 16889 and HBX 16890 been running this on 3s running stock components only thing I did put heatsink on motors to prevent the heat and have run full throttle going up and down motor don’t get to hot at all just normal and the receiver less then warm this cars take 3s like champs, love them little 1/16 rc cars play with them at work on lunch break guys from work go damm that goes super fast, they scream fast down the streets good video 👍🏻
Thanks for the comment! Happy to see others running on 3S with no issues
what kind of esc did you get with them? the new red one or the old one with the heatsink on it?
@@scappellos25amp esc/rx
These are great little bashers. Nearly indestructible. Mine does 45mph, but I have a few upgrades.
What have you done with it ???
@@TristanN317 bigger tires, hobbywing 10bl60 esc, 2845 brushless motor I think 4400kv and 3s lipos
Does the yellow brushless one already come with oil filled shocks and what size li po 3s battery should I buy thank you
unfortunately the one i bought from Amazon did not come with oil filled shocks in either model. if you are good at soldering something like this would work. 850mah is probably the max that will fit snug for 3S amzn.to/3f4Jivp
@@413RC so there isn’t any upgrades without any modifications
@@2FrEsH4ya617 I think it depends where you buy it from. I've seen some of the brushless ones on banggood coming with oil filled shocks. you can always buy 3S batteries with the deans connector already
amzn.to/2Ke0t2t
I’ve had the brushless now for about two months everytime I’ll take it out motor comes loose repositioned ,Lock tight , same thing every run... anyone else had this problem? Forgot to mention I am running 3S batteries
Interesting! I haven’t heard of that issue
413RC I’m going to make a bracket that holds the back part of the motor as it is just floating in the air I’ll let you know how I go... hopefully it will sort out this little issue apart from that this is an awesome little truck👍
@@cesarurrutia6128 sounds like a plan! Let me know how it goes!
Do u still run the stock brushless on 3 s
Yes I do!
Love rc,s just like u
How are the temps on 3S for the brushless? Thanks.
Temps were fine with both vehicles
Great video, great Info. Wicked Trucks 👍👍👍
Glad you like them!
Awesome video. Looks like they don't offer the brushless version anymore. I clicked on your link and it takes you to the brushed version.
So you can run the 3s on the 2s esc/receiver?
I have and didn't run into any issues. But do this at your own risk
Brushes 1.....great
Hi Jeff from ebay! Great job with everything! Cool trucks great vid! God bless you bro!!
La version brusherd en 3s sa roule ?
I’m sorry I don’t fully understand. One model is brushed. The other is brushless
Do you experience any range issues with the 16889a brushless?
I do not. It goes plenty far for me
Where can I buy the 3s Lipo battery? Do you have a link? I don't wanna order the wrong one.
It looks like the 3S battery I used in the video is no longer available. But I listed a good alternative underneath my video in the description. check out the links :)
Hi 413RC,
I want to ask you ask how much mAh battery using 3S? The capacity of 3S battery you been using.
These are the exact batteries I am using amzn.to/3CCryTI
@@413RC thank you dude. 👍👍
What are the better tyres for this model? Thinking of tuning it as well with the battery too. is there something like in between the stock and 3s?
Rubber
I'm thinking about putting a 3s on mine do you think it will break
I ran both on 3S with no issues. Just be mindful of motor and ESC temps
Will 3s damage it? Can you get more parts?
Simply watch motor and ESC temps and you should be fine to run 3S
How long can I run a 3s in one of these and what's the size I should look for? I have the Blomiky version of the brushless.
I have most of the products featured in this video linked in the description. Run 3S at your own risk
@@413RC thanks! I'm going to go with the venom 1300 3s to test it out!
James Clark School...
What lipo battery would you recommend for the ravage rc car?
anything that will fit really. The ones i have listed in the description for 3S are pretty good and fit fairly well. Just be careful of temps running on 3S
@@413RC yeah thats why I was asking because I was wondering about heat and if the esc could take it
Yo hi. I just ordered a 3s Lipo. And i really need help. Can you tell me if it supports it or not and how long can it run it for, also can I get a link to the fans for the Motor
Hey there! Run 3S Lipo on either truck AT YOUR OWN RISK. Check motor temps after rough driving as it will get very hot.
Something like this will work you will just need to change the connector to either fit where the lights go or solder it to a power lead amzn.to/2JeGX5D
How long did it take to arrive I’m also in the US
I ordered mine from amazon
Thought it was a big huge rc car in the beginning but it was an actual car 😂
LOL! Long live the jeep!
Can I get the link for the 3S and it's Mah?
Link in description
Where’d you get that awesome yellow body?
Hey! Thanks for the comment. I believe I got the yellow one from Banggood. They swap bodies often unfortunately
When u ran 3s was it modded or stock
Both are shown as stock...
Is it possible to gear this thing up? I just ordered the brushless one on ebay for 50 bucks
Might be difficult because the motor mount isn't adjustable. I would say just run a 3S battery in it. its plenty fast
@@413RC yeah i was planning to thats fine thanks again
@@413RC due to the motor mount is not adjustable, so we need too many pinion and spur set to try until the gearing is fix. Otherwise can try increase tires diameter to gain top speed.
@@mzmhrc1274 I agree. or just run it on 3S for more speed lol.
I bought the brushed version for my daughter. It's a great truck. Awesome comparison
Hi tom! What hex size these two model use is it 12mm hex?
Hi! I'm Jeff! yes these use 12mm
@@413RC sorry to call you wrong.is it same for brush and brushless? Both are using 12mm hex? And how about for sg1601 brush and brushless, are they also 12mm hex? Thanks in advance!
What 3s battery do you recommend or use?
amzn.to/3192RMZ
Thanks!! Appreciate the reply.
What 2S Lipo?
the stock one
How did you add the motor to the stock ESC?
I don’t understand
@@413RC Well I saw the ESC with the upgrade motor but when I zoomed in I saw that there were 3 connectors to connect with the motor.
@@Lrz_392 that is the brushless version of the truck. It comes with a brushless ESC
Awesome video!!! I like it!
Thanks!!
Reliable enough to use a 3S as the primary battery for the brushless?
Potentially! Just be aware of motor & ESC temps. Allow for cool down between packs
The kv is not the same among the motors that makes this test a little less helpful
It’s a stock brushless vs stock brushed test
Given the comments I would not venture to put 3 s on the brushless
It works fine :)
Plus I was using a zippy compact 1500mah 40c 3s, maybe the extra 500mah is too much?
mah will determine how long you run for, not how much power. if you skip to 7:51 you will see the inside of the brushless truck. or if you watch this video here ruclips.net/video/Wf2Oh5fxzO4/видео.html :)
You want a 3s 20c
My binding light on my transmitter keeps blinking. What could it be?