The company drove the price up fifty bucks after the review came out. Horrible practice and it rubs off in a really bad way. As an engineer I’ll just stick with my rotrings
Take a look at the Pentel Kerry from the Japanese market. Not to expensive, all metal construction. What’s unique about it is that it has a cap that you can post and still advance the lead. Very smooth action as well.
I miss my Scripto translucent mechanical pencil from the late 70's... e-Bay sells them for around $12... You weren't Nerdy enough back then unless you had a couple...
Honestly, I found a bit ago the Pentel P205 and I will never go back to a wooden pencil. It is such an affordable and reliable option. I am not kidding when I say I literally have a dozen of them between my desk, car, and packs.
Check out the Spoke 4 mechanical pencil. If it's in stock, you can get a custom color and material selection with a size of your choice for ~$50. I think they're a wayyy better deal.
Needs a top option for touch screens. Love me some bronze, so there's that. Clip is a deal breaker. Also the Big Idea Design Arto will take any lead size up 2mm (as well as any pen refill) because it uses a twist collet Chuck. And is 30 bucks cheaper in Ti.
I was in at $100, and that extra $50 would have covered accessories, since you can't just buy one in .9. I don't know if I want to swing $200ish (including accessories).
I remember this kind of pencil when i was a kid, but made of plastic 30 years ago and the price was around 5 dollars so 100 for this honestly seems way way over price
Cost not simply measured in cash outlay at purchase. That old (still around) favorite was/is plastic. For folks choosing more biodegradable/sustainable products, metals may be preferable. Moreover, unlike the beautiful Graphgear 1000, the innards are swappable. One pen, many guts will be attractive to many.
Yeah....Nah, nice piece but bit too costly for a pencil for me (also partial to the Pentel mechanism)......just like 0.5mm/HB is not for me (I find 0.7mm/2B - more suited for field note taking and navigation), and I'm not too sure anyone would be changing out the internals that often, thanks for the review
I really don't think the swappable mechanisms makes much sense, at least how you're spinning it. The sort of people that go back and forth between different lead sizes and grades just keep multiple pencils on hand, usually with a little mechanism to indicate which one is which. For the current price these are going for you could get 7 Rotring 600s, 5 Rotring 800s, 30 P205s, so-on, which would be universally better for drawing and drafting. Still a nice pencil, and a great review, it's just that nothing about this pencil really targets practicality or functionality, even in the context of fancy stuff.
Just bought one in titanium. I like how the pencil’s mechanical is simple & intuitive. I bought a metal mechanical pencil from a different brand for my daughter last year and the mechanical movement is so dumb with the side slide lever to push out the lead.
I got a yard-o-led pencil from my godfather when I was Christened . I still have it and the model is still under production . New in 2020 it costs $215USD . Yes pencils can cost a few pennies. Mine is silver though. Nice vid Richard
As an adult who doesn't have a job that requires a pencil such as an architect or wood worker I find myself only using pens in life. I stopped using pencils once I graduated college as I'm sure most people are the same way. I'm only here because I enjoy torturing myself and looking at things I can't afford.
The product is beautiful but the company fails to provide instructions as to how to replace the lead. It cannot be figured out. I have emailed the company over and over and over. I typically get a polite reply about a week later, but so far they have never bothered to answer my question and explain how to put new lead in. I wish I had not wasted money on this.
FYI the prices and some of the info is no longer true. $150 for all metals but titanium which is $200, and there's no options for different pencil leds. 0.7mm out of the box and while there is a reference to different leds as an accessory, the accessory itself is not listed anywhere for sale.
Actually, it is a bargain for the quality of materials and workmanship that you are getting. The price has gone up by $50 approx. since the review but still very competitive. Have a look at a Montblanc Le Grand pencil and you will see what overpriced looks like *wink*.
my biggest issue with buying "made in america", is that most of these companies charge just too much for their products. its like they think just because its made in america, they can just double or triple the price of the product and generally its no better quality than overseas. id love to support more american made products, but im not paying double or triple just to line an americans pocket. provide a realistic price (not just because its made in usa) for the product and i will happily support you. they are still asking $150...no thanks.
Drafting tables have a place for your pens and pencils. They are often steep enough to not hold anything, also engineers and architects use computers these days.
Things you did not cover: how well the included eraser works. IMO a black eraser will smear. Also: the availability of replacement erasers. Too many mechanical pencil makers make finding replacement erasers impossible.
i've replaced my graphgear 3-4 times due to the plastic internal breaking. i'm worried about the rotring tip if i go that route since i carry my pencil around in my pocket all the time. if i want something that will last..i think this one may be the answer. but it's now 150 bucks and not 99 bucks.
100 bucks for a pencil?? 20 bucks for a hex screw??? at this price they should come with all those accesories included, and its still hard to justify...especially since your going to loose it.. and also, needing a hex driver to add lead??? im sure they could have come up with a better, finger loosening way to seal the end
Hey Nick, not sure what pricing You were given by the manufacturer but all the prices You quoted need to have another $50 added. That's a damn shame, can't justify $200 for a ti model...
Pencils > pens. The world is buillt on the ideas sketched out with pencils. Pens come later to set details.....but the ideas are done with pencils and scraps of paper.
The company drove the price up fifty bucks after the review came out. Horrible practice and it rubs off in a really bad way. As an engineer I’ll just stick with my rotrings
my thoughts exactly. i was going to buy it but i didn't like the idea that im supporting a shady small business modeling itself after a big bank.
Oh of course. Someone got greedy. Yeah, that definitely is bad business practice and leads to a ruined reputation
Danm the price went up Nick
These pencils are now $150 on the website. Definitely not worth it as it's not perfect in the aspects that Nick has mentioned.
If I didn't know you could get a Spoke 4 for $50 I might consider it, but $150 is still ridiculous.
@Steven Zurk For $150, I can buy two, maybe even three high quality pens/pencils from other companies with better QA procedures.
@@dave6429 which?
Take a look at the Pentel Kerry from the Japanese market. Not to expensive, all metal construction. What’s unique about it is that it has a cap that you can post and still advance the lead. Very smooth action as well.
The number of times ive poked a hole in my pants from a non-retractable pencil tip is too damn high
O lol I'm
I miss my Scripto translucent mechanical pencil from the late 70's... e-Bay sells them for around $12... You weren't Nerdy enough back then unless you had a couple...
Honestly, I found a bit ago the Pentel P205 and I will never go back to a wooden pencil. It is such an affordable and reliable option. I am not kidding when I say I literally have a dozen of them between my desk, car, and packs.
“Getting the lead into the pencil”... don’t worry, sometimes it just takes more time.
I'd love to see you review more mechanical pencils! I got into them recently.
.9 mm for the win! I love mechanical pencils as I'm a woodworker. I'd love this. But I can't see paying $100.
Check out the Spoke 4 mechanical pencil. If it's in stock, you can get a custom color and material selection with a size of your choice for ~$50. I think they're a wayyy better deal.
try 150 charles
fancy looking pencil ✏ 😍 great video keep up the awesome work sir. hope you have a great day.
Would loved to have had one of these back when I was on the drawing board designing tools& dies.
Needs a top option for touch screens. Love me some bronze, so there's that. Clip is a deal breaker. Also the Big Idea Design Arto will take any lead size up 2mm (as well as any pen refill) because it uses a twist collet Chuck. And is 30 bucks cheaper in Ti.
That 2B pun was amazing
If the clip was the Allen key ....that'd be whoa.
I love the pen/pencil reviews, keep it up!
Prices have already gone up to $150.
Thats kind of a dick move.
That is Nick's fault, he said it was a more expensive looking pen without the clip. So they removed the clip and increased the price by $50.
I was in at $100, and that extra $50 would have covered accessories, since you can't just buy one in .9. I don't know if I want to swing $200ish (including accessories).
I remember this kind of pencil when i was a kid, but made of plastic 30 years ago and the price was around 5 dollars so 100 for this honestly seems way way over price
Cost not simply measured in cash outlay at purchase. That old (still around) favorite was/is plastic. For folks choosing more biodegradable/sustainable products, metals may be preferable. Moreover, unlike the beautiful Graphgear 1000, the innards are swappable. One pen, many guts will be attractive to many.
@@laelsorensen778 yes it is over priced concidering a nice space costs less
I have the Modern Fuel pen pencil set Which never released my desk what I take with me instead is the rotring pen pencil set
Ha! funny, I was chatting with their marketing team on facebook last week and told them they should send one to you. I guess they already had lol
I prefer a texture on my pencils. I also like a 0.3 mm for drawing.
Yeah....Nah, nice piece but bit too costly for a pencil for me (also partial to the Pentel mechanism)......just like 0.5mm/HB is not for me (I find 0.7mm/2B - more suited for field note taking and navigation), and I'm not too sure anyone would be changing out the internals that often, thanks for the review
As an artist whose medium is Graphite on paper, the pencil interests me. But not at $150 plus extras…Great review by the way…!!!
I really don't think the swappable mechanisms makes much sense, at least how you're spinning it. The sort of people that go back and forth between different lead sizes and grades just keep multiple pencils on hand, usually with a little mechanism to indicate which one is which.
For the current price these are going for you could get 7 Rotring 600s, 5 Rotring 800s, 30 P205s, so-on, which would be universally better for drawing and drafting.
Still a nice pencil, and a great review, it's just that nothing about this pencil really targets practicality or functionality, even in the context of fancy stuff.
Just bought one in titanium. I like how the pencil’s mechanical is simple & intuitive. I bought a metal mechanical pencil from a different brand for my daughter last year and the mechanical movement is so dumb with the side slide lever to push out the lead.
Is the other pencil a Tactile Turn?
I got a yard-o-led pencil from my godfather when I was Christened . I still have it and the model is still under production . New in 2020 it costs $215USD . Yes pencils can cost a few pennies. Mine is silver though. Nice vid Richard
As an adult who doesn't have a job that requires a pencil such as an architect or wood worker I find myself only using pens in life. I stopped using pencils once I graduated college as I'm sure most people are the same way. I'm only here because I enjoy torturing myself and looking at things I can't afford.
Is there a better voice on RUclips? I think not. ;-) Excellent video Thanks!
Bought the bronze and titanium
Still can’t beat HB2 pencils.
"Do not get into pencils." (?)
The product is beautiful but the company fails to provide instructions as to how to replace the lead. It cannot be figured out. I have emailed the company over and over and over. I typically get a polite reply about a week later, but so far they have never bothered to answer my question and explain how to put new lead in. I wish I had not wasted money on this.
FYI the prices and some of the info is no longer true. $150 for all metals but titanium which is $200, and there's no options for different pencil leds. 0.7mm out of the box and while there is a reference to different leds as an accessory, the accessory itself is not listed anywhere for sale.
Oof. That's a shame.
Nice looking pencil, a little over priced. Great review 👏
Actually, it is a bargain for the quality of materials and workmanship that you are getting. The price has gone up by $50 approx. since the review but still very competitive. Have a look at a Montblanc Le Grand pencil and you will see what overpriced looks like *wink*.
my biggest issue with buying "made in america", is that most of these companies charge just too much for their products. its like they think just because its made in america, they can just double or triple the price of the product and generally its no better quality than overseas.
id love to support more american made products, but im not paying double or triple just to line an americans pocket. provide a realistic price (not just because its made in usa) for the product and i will happily support you.
they are still asking $150...no thanks.
Drafting tables have a place for your pens and pencils. They are often steep enough to not hold anything, also engineers and architects use computers these days.
Shabbaz dropping the limpbizkit 😂👌🏼
Didnt they used to be 99 dollars? Now the ti is 200
0.05 lead? Well, that would be *significantly* too thin ;)
Things you did not cover: how well the included eraser works. IMO a black eraser will smear.
Also: the availability of replacement erasers.
Too many mechanical pencil makers make finding replacement erasers impossible.
The Nick, you had it right at .05, .07.
i've replaced my graphgear 3-4 times due to the plastic internal breaking.
i'm worried about the rotring tip if i go that route since i carry my pencil around in my pocket all the time.
if i want something that will last..i think this one may be the answer. but it's now 150 bucks and not 99 bucks.
Nice pen, but I still prefer my pilot birdie pencil, so smol
The price hike wasn’t cool. I noticed this guy a couple months and was seriously considering. Not now. It looks nice though.
I'll tell you what the 100% honest review is.... Just get an Ernest Hemingway pencil they're half the price and basically the same design.
100 bucks for a pencil?? 20 bucks for a hex screw??? at this price they should come with all those accesories included, and its still hard to justify...especially since your going to loose it.. and also, needing a hex driver to add lead??? im sure they could have come up with a better, finger loosening way to seal the end
I had considered this as a gift to my father for chrismas but the price increase and clip turned me off. A shame
Blimey, that’s a really compelling mechanical pencil!
That’s a nice looking pencil, but i stick with my $5 Zebra TS-3.
Jesus effing Christ - a 15 lecture on a pencil !
Hey Nick, not sure what pricing You were given by the manufacturer but all the prices You quoted need to have another $50 added. That's a damn shame, can't justify $200 for a ti model...
Just get a rotring, cheaper and still an excellent pen and pencil
if i was a mechanical pencil guy, id like it, but i prefer a nice pen so ill stick with my $5 kuru toga.
Good fucking lord 150 bucks for a pencil? No sir
It is now $150 Ti is $200 which I would still like, but I am broke so.....
Pencils > pens.
The world is buillt on the ideas sketched out with pencils. Pens come later to set details.....but the ideas are done with pencils and scraps of paper.
Web is showing $150. No clip either.
$250.00 not $99.00
2.b or not 2.b 😂
0,5 milli meters... How many feet, toes and bunions is that? =)
Why do you sound like a comically exaggerated mobster?
Why does this guy sound like he’s doing a really bad impression?
After 2min his voice becomes aggravating
He sounds like he's about to raise my rent
15minutes of shilling