@@iamaduckquackthat is in life in general! That is why there is a video! What are you trying to say? That is why people make videos! Your question makes No sense at all! 🤔👀😭
Hey when you have radii spin that arm around and put the gun in line with your back tire its a lot easier and makes for a cleaner line, also a caboose or lazy liner makes radii easier and cleaner too, but they are a little pricey and a pain to carry around. Almost a necessity for big parking lots or airports or those sort of things though.
Dude I’ve seen probably a dozen videos that just randomly pop up on my shorts over the last week and this is the first time I’m actually impressed! You did that !! Steady hands!
Also u should be striping so ur not turning towards the line , i could teach u alot more on striping, im a foreman at a large asphalt paving company and we do alot of laying out parking lots , its been over a decade being the foreman
Painters at my company just lift the back of the machine and pivot around. There front wheel doesn’t turn. Don’t know if it came like that or it’s broken. Bosses tend to not spend money on fixing if there’s some way to workaround troubles and employees don’t complain about it.
Hello. Serious question. As someone who also paints lines, don't you put down glass beads to make them shine at night so you can see them? We do it with every single line we paint cause you can't see them at night without it. How come you don't?
I'm not sure if you are doing this work in the US or some other country, but if in the US that stripping will fail inspection for Cerrtificates of Occupancy. Firelanes are red stripes and white lettering.
Thin the paint, don’t be scared to. Don’t over do it but in general with latex the thinner the paint the smoother it comes out it’s just better and easier on the machines pump.
@@precisionservices8215 if it’s latex paint yeah with water. Just depends but you’ll just know when you start spraying . If you have to put the gun really high to just get a 4-4.5” line you should add some more water, mix it up, cycle the paint to get the new mix into the hose then test again, it’s always with yellow or just any color you have to thin it a little bit because it’s just very thick. White I almost never have to thin it except in winter. but yeah in general I’d add either half a bottle of water or a full bottle if it’s really thick, and again for winter if your still using latex same applies worst I had to do is add 2 full bottles for the paint to come out right.
DUDE….I LOVE YOUR VIDEO CONTENT BUT DUUUDEEE PLEASE STOP USING THE STEVEN UNIVERSE SOUNDTRACK FOR ALL YOUR VIDEOS. IT ISNT RELAXING ITS REPETITIVELY ANNOYING EVERY TIME.
Nice work! I don’t think people realize how hard it is to do the curved lines, especially ones this long!
They have no clue 😝
@@ColinPatterson_How could they know if they don't have that job?
@@iamaduckquackthat is in life in general! That is why there is a video! What are you trying to say? That is why people make videos! Your question makes No sense at all! 🤔👀😭
Its really hard man. Had a job to paint the curved taxilane on the runway on the bumpy road and curved man that was challenging.
Exactly!!!! People have no idea!! They will be like “ hoW hArD cOuLd tHat bE?! “
Slight curves u do not release the front wheel, u put a little pressure on turning and u will get a perfect curve line
This is FACTS!
@migmigmigmig3776touch it up with black paint and re do the line
U dont mess up lol if its a smLl mess up they do have black striping paint but generally u would slightly grind line off
@@shortcrusher6935 this is FACTS again 😂
Hey when you have radii spin that arm around and put the gun in line with your back tire its a lot easier and makes for a cleaner line, also a caboose or lazy liner makes radii easier and cleaner too, but they are a little pricey and a pain to carry around. Almost a necessity for big parking lots or airports or those sort of things though.
Facts bro‼️ swing that arm around and he could have more control and a better visual of the line he’s striping.
Y’all always are doing great work. Those of us that have worked hard appreciate it.
You are the man Ricky 🫡 thank you 🙏
you're damn good at that freehand.
Thank you boss 🙏🫡📈
Dude I’ve seen probably a dozen videos that just randomly pop up on my shorts over the last week and this is the first time I’m actually impressed! You did that !! Steady hands!
Thank you boss 🙏 I appreciate you🫡📈
So satisfying! Love watching your content :)
These videos are so satisfying to watch
I love precision.
You didn’t find it here 😂
I got anxiety with all those small curves and swerves.
Excellent work!!! In my country 100 people will be needed to do that and 1 month to finish that
Goddamn, something about watching that is so aesthetically pleasing. Lol.
Awesome! Perfect
You are a master.
I hope to be that good, one day. Hat is off to you. 👍
Skills!
Nah this would give me so much anxiety. My inner perfectionist wouldn’t allow for this work. Props to those that do it.
That inner perfectionist can make you a lot of money! 📈
Subbed! What state do youwork our of?!
The tie in at the end
You had one job…
Also u should be striping so ur not turning towards the line , i could teach u alot more on striping, im a foreman at a large asphalt paving company and we do alot of laying out parking lots , its been over a decade being the foreman
Painters at my company just lift the back of the machine and pivot around. There front wheel doesn’t turn. Don’t know if it came like that or it’s broken. Bosses tend to not spend money on fixing if there’s some way to workaround troubles and employees don’t complain about it.
Nice love see striper videos
This machine is toooooo heavy to lift the back wheels…
Hello. Serious question. As someone who also paints lines, don't you put down glass beads to make them shine at night so you can see them? We do it with every single line we paint cause you can't see them at night without it. How come you don't?
What's the difference between a squiggly line and a straight parallel perpendicular line? 😉
What kind of paint do you use
Is it difficult to remove this paint from unwanted areas if a mishap occurs or just black paint over it
If we mess up we will clean it up with black paint! It’s pretty hard to remove 😂
What's the pay for this job?
You need a carb clean
I'm not sure if you are doing this work in the US or some other country, but if in the US that stripping will fail inspection for Cerrtificates of Occupancy. Firelanes are red stripes and white lettering.
He's in the US. As am I; and I've always seen yellow for this work.
Well, i never knew how skilled you had to be to do this. I will never see road marking the same way!
Man, AI robots will excel at that job
When robots can replace their own blown gaskets and seals maybe then we will see an uprising.
Хороший аппарат
My machine seems to choke when doing long lines. Does it happen to all the machines or have I done something wrong?
Might need new lines or just need to be cleaned.
@@HandOftehEmpirez the machine is fairly new, I bought it back in February but I’ll definitely do a deeper clean hopefully that helps
Thin the paint, don’t be scared to. Don’t over do it but in general with latex the thinner the paint the smoother it comes out it’s just better and easier on the machines pump.
@@BroTheMasterthin it with water? Also what ratio would you recommend or what kind of consistency?
@@precisionservices8215 if it’s latex paint yeah with water. Just depends but you’ll just know when you start spraying . If you have to put the gun really high to just get a 4-4.5” line you should add some more water, mix it up, cycle the paint to get the new mix into the hose then test again, it’s always with yellow or just any color you have to thin it a little bit because it’s just very thick. White I almost never have to thin it except in winter. but yeah in general I’d add either half a bottle of water or a full bottle if it’s really thick, and again for winter if your still using latex same applies worst I had to do is add 2 full bottles for the paint to come out right.
Highest probability of success for my golden retriever puppy dog from the following applesauce URLS?
The Pacific Ocean has fewer waves than that line
Camera doesn’t do it justice 😂
DUDE….I LOVE YOUR VIDEO CONTENT BUT DUUUDEEE PLEASE STOP USING THE STEVEN UNIVERSE SOUNDTRACK FOR ALL YOUR VIDEOS. IT ISNT RELAXING ITS REPETITIVELY ANNOYING EVERY TIME.
So satisfying