If you want it to stick properly use a heat gun or blow dryer to activate the glue. Plus outside proper temperature. I have both on my z28 and lancer 3 years no issue. Yes sharp scissors help.
@@stonecold293851 I just did mine in my car port, I didn't blow dry. I figured it was hot outside enough. Just cleaned and pressed on hard and evenly and then went back and rolled a cup over the whole thimg to make sure each inch got pressed.
looks good, thanks for the video! how do you know exactly where to place it as far as sticking out, i didn't see any signs of marking, did you just eye ball it?
Captain 345 I’ll have to rebrand the channel, and I know I’ll lose a few followers (hope I don’t), but I purchased a 2019 Mustang GT California Special.
@@blessed405 Nvm. Lol. I kinda did the same as you. I had a 2013 Charger SXT PLUS RALLYE, but last month traded it for a 2015 Charger R/T Road and Track. I loved the 2013 but it had an alignment problem from day one that they could not get it to stop pulling to the right even after 6 alignments, steering rack changed, suspension components changed, and more. I got sick of it. In the 3 years I owned it I only put 5000 miles on it so if I drove it more it would have been more of a problem. Oh well I happier now. The R/T has 21,000 miles on it and is loaded.
It looks like on the passenger side the lip is sticking out forward, while the on the driver's side it's facing downwards (as it should be). Is this a bit inconsistent?
Cut the damn thing already! I had to fast forward smh....
Danny Ortiz 😂😂😂
Coming soon....Netflix documentary on him cutting the EZ Lip.
buickmonte 🤣🤣🤣 that would be the best Netflix show ever! Lmao
Put a few screws on the bottom as well so the sticky part won’t come down
If you want it to stick properly use a heat gun or blow dryer to activate the glue. Plus outside proper temperature. I have both on my z28 and lancer 3 years no issue. Yes sharp scissors help.
Its 103 degree currently in AZ, you think its fine?
@@judevandever2602 bruhhh im literally in az and just searched up vids and was gonna ask if its safe in this heat
@@stonecold293851 bought mine after the video, its been holding up fine, hasn't released or anything. Just gotta make sure area is super clean!
@@judevandever2602 should i do outdoors or inside my garage?? Also how long do you blow dry for first??
@@stonecold293851 I just did mine in my car port, I didn't blow dry. I figured it was hot outside enough. Just cleaned and pressed on hard and evenly and then went back and rolled a cup over the whole thimg to make sure each inch got pressed.
Hey, would you recommend using an electric screwdriver instead of a drill for installation???
I'm going to attempt to do this on my bmw 328i with 3m double sided tape, wish me luck 🫰I have the Rhino Lip, hope it works
I feel like once you scrape something, that thing is just going to be hanging from one side lol
looks good, thanks for the video! how do you know exactly where to place it as far as sticking out, i didn't see any signs of marking, did you just eye ball it?
I eyeballed it for the most part.
Outlaw edge sent me over 👍
All fit is much more durable and worth the money
How's it holding today
Very cool, didn't know what a EZ LIP was until I saw this video. Also love those slippers, lol.
DC10 FOR LIFE haha!!! Thanks!!
So glad I decided not to order this for my Charger. Thanks for the video.
Captain 345 no problem man!! I no longer have the charger, but I’m glad my video helped you make the decision!
@@blessed405 that's sad man. What are you driving now?
Captain 345 I’ll have to rebrand the channel, and I know I’ll lose a few followers (hope I don’t), but I purchased a 2019 Mustang GT California Special.
@@blessed405 Nvm. Lol. I kinda did the same as you. I had a 2013 Charger SXT PLUS RALLYE, but last month traded it for a 2015 Charger R/T Road and Track. I loved the 2013 but it had an alignment problem from day one that they could not get it to stop pulling to the right even after 6 alignments, steering rack changed, suspension components changed, and more. I got sick of it. In the 3 years I owned it I only put 5000 miles on it so if I drove it more it would have been more of a problem. Oh well I happier now. The R/T has 21,000 miles on it and is loaded.
@@blessed405 what happened to the Challenger?
Jesus Christ why don’t none of these videos show the finished product
It looks like on the passenger side the lip is sticking out forward, while the on the driver's side it's facing downwards (as it should be). Is this a bit inconsistent?
How you going to put a bigger lip when the smaller one ripped off and you where complaining about it
I bought one for my car too.. hope ill manage to do it like you
nice installation
χλαπατσας ς thanks fam!!!
Next time don’t use school scissors. Lol.
jose lopez haha!!!! Ikr! 😅😂
Did you install it around your car too?
Imcisco__ front lip and sides
Try not having annoying music in the background
still holding up ok?
Nice video bro, I had to get one of these as well👌🏻🔥
AlbinoRhinoR/T Thanks fam!!
Mopar405 anytime bro
Man you should get a better pair of scissors! Never skimp on the equipment.....
Maybe u should lift the car a little makes it easier
2inch or 1inch??
2
What is a lip for?
On this case.... To ruin the aerodynamics of the car, to fall off in a month or two, get under the front wheel and rip the hole front bumper off.
Come on just cut it!!!!!!😣
Waterproof??
Yes
TURN THE DAMN MUSIC OFF SO WE CAN HEAR YOU!!!!!!!!
Curtis Pechacek 🤣😂😅
I can't hear you over that annoying music!
😂😂😂
What’s the cost
Saad Hamid EZLip Pro is $54.99 | EZLip is $34.99
Cant hear u cuz of the dumb music
underdogg313 😅 I can hear myself perfectly fine. But thank you for the comment 👍🏻
👎
schneiden ist nicht deine stärke, mein gott , geh , mach ein kurs.
wie ein kleines kind.